More From Contributor

£15.99
The CCP-4 Crank Puller is specifically designed to remove crank arms from splined Shimano Octalink & ISIS Drive bottom bracket spindles that do not use a One Key Release system It uses a long comfortable handle & a fine thread for the leverage needed to remove tight crank arms Unique rotating tip design has been updated over the CCP-4 & ensures even smoother operation & longer life Note: The CCP-44 will not work on crank arms that fit standard square tapered bottom bracket spindles ...
Available
£449.99
Perfect headset performance requires accurate machining of the fork crown race & this is the tool to do it Cuts the outer edge & lower surface of the crown race seat A simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubes
Includes: high speed steel cutters & adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks & 30.1 mm crown race seat on 1-1/8inch forks
...
Available
£260.1
Adaptor for the Park CRC-1 that allows the quick & perfect facing of 1.5 / 39.8 mm standard crown races Designed for use on tapered steerer forks Grub screws lock adaptor & cutter in place for easy use
Includes: precision ground crown race cutter For best results use plenty of Park CF-2 cutting fluid
...
Available
£14.39
Use with any 3/8 inch drive torque wrench to verify pedals are torqued to the correct spec Laser cut heat treated & plated for long life Made in the USA & covered by Parks legendary limited lifetime warranty ...
Available
£449.99
Perfect headset performance requires accurate machining of the fork crown race & this is the tool to do it Cuts the outer edge & lower surface of the crown race seat A simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubes
Includes: high speed steel cutters & adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks & 30.1 mm crown race seat on 1-1/8inch forks
...
Available
£8.99
Designed for the safe & clean cutting of carbon steerers handlebars & seatmasts Super fine cutting edge prevents damage to the carbon weave either side of the cut Fits Park SAW-12 & many other 12 inch hacksaws ...
Available
£47.49
A dedicated peening tool to ensure the safe & secure connection of Campagnolo 11 speed chains After pressing the special connecting rivet into a Campagnolo 11-speed Chain & breaking off the pilot Campagnolo requires the end of the connecting rivet to be peened or deformed to prevent chain failure The precision-machined CT-11 is used to accurately perform this critical process The CT-11 will not install or remove chain rivets its sole function is topeen & secure the end of the Campagnolo 11 speed connecting rivet The Park Tool CT-4.2 Master Chain Tool is used for rivet installation & removal ...
Available
£61.74
Park tools latest pro-level chain tool is now updated to work with the latest generation of narrow chains including both Shimano ad Campagnolo 11-speed chains

Includes::
removable peening anvil for securing Campag 11-speed chains Park Tool have developed a precise powerful tool to quickly & accurately remove & install chain pins Specially designed to work with the tight tolerances & narrow profile of high quality derailleur chains Integrated Link Pocket to ensure precise alignment during use Replaceable rotating pin Perfectly contoured cushioned handles Precisely machined investment cast body & components Note: the CT-4 is NOT compatible with Wipperman chains due to the shape of the chain side plates; most chain side-plates are shaped like an hour glass however Wipperman chains have straight side-plates so they will not fit in to the tool Made in the USA & covered by Parks legendary limited lifetime warranty

...
Available
£31.49
Our neatest & most compact chain tool perfect for mountain road or commuting use Works with 5
- 11-speed chains & thanks to its
...
Available
£16.19
A set of four replacement chain tool pins & one ball bearing to make your CT-4 Master Chain Tool as good as new ...
Available

Park Tool Crown Race Setting System 1.5 " Steerer

Precision installation tool specifically designed for setting headset crown racesIncludes setting tube and one 1.5 inch setting insertAccurately places the crown race whilst distributing the impact evenly and without damage to the bearing surfaceSafer more accurate alignment and easier to use than traditional slide hammers
  • Availability: In Stock
  • Supplier: Cyclestore
  • SKU: 14701
Availability: In Stock
£56.99

Product Description

Precision installation tool specifically designed for setting headset crown races
Includes: setting tube & one 1.5 inch setting insert Accurately places the crown race whilst distributing the impact evenly & without damage to the bearing surface Safer more accurate alignment & easier to use than traditional slide hammers

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Inch - Equivalent to approximately 2.5cm
Traditional - Something that has become the same through a period of time and thus repeated.
Accurate - A measurement of precision when all elements are correct.
Traditional - Something that has been around for a while and is repeated regularly.

Supplier Information

Cyclestore
Cyclestore is a leading online cycle retailer, selling a large range of bicycles, bike accessories, components and clothing, together with camping and hiking equipment and ski and snowboard accessories. Cyclestore brings over 20 years shop trading experience to its online store, and the knowledgeable and helpful staff are able to answer technical queries relating to all bikes and equipment. The range of bicycles includes mountain bikes including full suspension and hard tail mountain bikes, road bikes with light, streamlined designs for fast speeds, sports hybrid bikes, comfort and leisure bikes, BMX bikes, folding bikes and touring bikes, with brands including top names such as Kona, Mongoose, Raleigh, Specialised, Giant, Carrera, Dahon and Dawes. The large range of bike accessories includes bags and panniers, bells and mirrors, bottles and hydration packs, helmets, lights, locks, cleaning accessories and pumps. Personal accessories include cycle shoes, sunglasses, reflective and safety wear and body armour.
Page Updated: 2024-03-04 09:44:06

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu