Prolong drive train life with this excellent kit Contains a Cyclone chain cleaner Gear Clean brush & 8 oz of CB2 Citrus Chain Brite cleaning fluid Everything you need to keep the drivetrain system clean & running super smooth Suitable for derailleur gear hub gear & single-speed bikes Made in the USA ...

An accurate way to check for wear of roller & pin on chains 1% of wear is enough to affect chainrings & sprockets & allow shifting performance to deteriorate Just insert the chain Checkers pins into two links press the swing arm gauge & then check the gauge window for an accurate reading Reads wear from 0.25% to 1%10-speed compatible ...

A worn chain shifts poorly & wears sprockets at an accelerated rate The CC-3 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.75% & 1% wear
- the point at which most chain manufacturers suggest replacement The chain should be replaced soon if the 0.75% side fits into the chain before other drive train components also start to wear out fast If the 1% side fits into the chain the chain is worn out & should be replaced immediately Made from precision laser cut steel Consider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too 10-speed compatible
...

A dirty drivetrain causes poor shifting & unnecessary wear to expensive parts. The CG-2.4 contains everything needed to quickly & easily clean the chain cogs & chainrings: CM-5.3 CYCLONE™ CHAIN SCRUBBER Clean bicycle chains quickly easily & effectively without the hassle & mess of removing the chain from the bike. The CM-5.3 uses an extra-large solvent reservoir & a series of four rotating brushes to get chains sparkling clean inside & out. A magnet at the bottom of the CM-5.3s solvent reservoir draws away particles scrubbed from the chain effectively keeping them from being redistributed on the chain during cleaning. The durable sponge material draws solvent from the chain as it exits the CM-5.3 reducing drips & mess. The CM-5.3 can handle any bike-specific chain from wide 3/16 single-speed* to narrow 12 & 13-speed. A reversible handle allows the chain to pass through forwards or backwards for compatibility with center drive e-bikes. CB-4 BIO CHAINBRITE Park Tool CB-4 is a 100% biodegradable natural plant-based degreaser formulated for use in the CM-5.3 Cyclone Chain Scrubber CM-25 Professional Chain Scrubber or with a scrubbing brush as a general purpose degreaser. When used with a chain cleaner CB-4 gets bicycle chains clean inside & out so theyre good as new. Will not harm alloy plastic rubber or carbon fiber parts so its safe to use for cleaning cassettes chainrings pulleys or any other component that accumulates muck & grime. GSC-1 GEARCLEAN™ BRUSH The GSC-1 is specially designed to free your bicycle drivetrain from muck & grime. The comfortable handle features a contoured toothed end to reach dirt deep between the gears & tough nylon bristles clean the derailleur & chain. Saves wear & tear on your chain & cassette. Also works great on derailleur pulleys brakes or other places where dirt collects. CG-2.4 FEATURES The Chain & Drivetrain Cleaning Kit
Includes:: CM-5.3 Cyclone™ Chain Scrubber GSC-1 Gear Clean™ Brush 8 oz. bottle of Bio Chain Brite™ The CG-2.4 works on nearly any bike including multi-speed single-speed & e-bikes.
Includes:: CM-5.3 Cyclone™ Chain Scrubber — Instructions GSC-1 Gear Clean™ Brush CB-4 Bio Chain Brite™ — Instructions

...

Cleans bicycle chain quickly easily & effectively without the hassle & mess of removing the chain from the bike. The Cyclone™ uses a large solvent reservoir hundreds of rotating bristles & a two-step cleaning process to get chains really clean improve shifting performance & extend the life of the chain & other expensive drivetrain parts. Works with all multi-speed bikes (5 6 7 8 9 10 11 & 12-speed) as well as some single-speed models & e-bikes The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain Special wicking sponge draws solvent from the chain as it exits minimizing drips & mess Sturdy handle makes the Cyclone™ easy to use & control Holds 2 fluid ounces (59ml) of solvent ...

The CP-1 securely grips 9 to 24-tooth cassette cogs when removing cassette lockrings The CP-1 requires no manual adjustments ensuring fast & easy one-handed operation 13.7 in/35 cm in length for superior leverage Forged steel construction Spring-loaded return Comfortable dual density grips ...

The CCP-4 Crank Puller is specifically designed to remove crank arms from splined Shimano Octalink & ISIS Drive bottom bracket spindles that do not use a One Key Release system It uses a long comfortable handle & a fine thread for the leverage needed to remove tight crank arms Unique rotating tip design has been updated over the CCP-4 & ensures even smoother operation & longer life Note: The CCP-44 will not work on crank arms that fit standard square tapered bottom bracket spindles ...

Perfect headset performance requires accurate machining of the fork crown race & this is the tool to do it Cuts the outer edge & lower surface of the crown race seat A simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubes
Includes: high speed steel cutters & adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks & 30.1 mm crown race seat on 1-1/8inch forks
...

Adaptor for the Park CRC-1 that allows the quick & perfect facing of 1.5 / 39.8 mm standard crown races Designed for use on tapered steerer forks Grub screws lock adaptor & cutter in place for easy use
Includes: precision ground crown race cutter For best results use plenty of Park CF-2 cutting fluid
...

Use with any 3/8 inch drive torque wrench to verify pedals are torqued to the correct spec Laser cut heat treated & plated for long life Made in the USA & covered by Parks legendary limited lifetime warranty ...