KMCs latest breakthrough in rust protection. Eco Prote Q treatment doubles the rust resistance compared to the RB treatment. Benefits of the smoother coating are less noise great performance maximum rust resistance & great look. 1/2 X 3/32
- 112 Links pin length 7.3mm For Internal gear hub / single speed Eco Pro Te Q Coating (EPT) Anti-Rust technology Less maintenance High reliability No Drop
...

Compatible with BMX & Internal Gear Hub set ups 1/2 X 1/8
- 112 Links pin length 8.6mm Compatible with: BMX / Internal
...

KMCs latest breakthrough in rust protection. Eco Prote Q treatment doubles the rust resistance compared to the RB treatment. Benefits of the smoother coating are less noise great performance maximum rust resistance & great look. Higher Inner plates prevent chain drop. 1/2 X 1/8
- 112 / 128 Links pin length 8.6mm For Internal gear hub / single speed Extra long 128L version for e-Bike Eco Pro Te Q Coating (EPT) Anti-Rust technology Less maintenance High reliability No Drop
...

Compatible with BMX & Internal Gear Hub Setups 1/2 X 1/8
- 112 Links pin length 8.6mm Compatible with: BMX / Internal Gear
...

Compatible with BMX & Internal Gear Hub setups 1/2 X 1/8
- 112 Links pin length 8.6mm Compatible with: BMX / Internal Gear
...

A 7 speed chain ideal for all types of bikes that run a 7 speed system. Chamfered inner plates to reduce sprocket rub noise. 1/2 x 3/32
- 114 Links pin length 7.3mm Compatible with: 6-7-12-14-18-21 speed For City & Trekking Low noise
...

Double X Durability unmatched chain life- KMC guarantees your satisfaction! Eco Pro Te Q Anti-Rust technology NON-Directional Design: assembly of this chain is independent of direction! It allows maximum compatibility no matter MTB or Race: this chain fits all. Pin Power: The unique KMC Bulls-Eye pin mushrooming technique which provides 200kgf of average pin power for unsurpassed side plate retention. Noiseless: Special Z bridge side plate configuration & chamfering provide excellent shifting performance & minimise noise even with a mix of different derailleur components. Nimble Shifting: The Z bridge side plate configuration means faster smoother quieter & more precise shifting. 1/2 X 3/32
- 114 Links pin length 7.3mm Compatible with: 6-12-18-21-24 speed For City MTB Race Trekking & Hybrid Tensile strength 1020kgf Bushless construction Half Nickel plated
...

Using new Chip On Board (COB) technology the Blinder Front Bike Light produces a punchy 200 lumens & is brilliant for attracting attention on the road or trail in all light conditions. Blinder is one of Knogs most individual front bike lights ever adding serious personality to you ride.
Features: Be seen from up to 450 metres away Easy On Easy Off
- Blinder fits bars & seat posts 22 – 32mm in diameter & head tube profiles with a circumference of up to 7.9 in using the additional large silicone strap Charge Indicators
- When your Blinder is running low on battery a red LED will light up next to the button. This ring will turn green & then turn off once the Blinder is fully charged Integrated USB (Universal Serial Bus) Connector
- No charging cable is required. Blinders integrated USB (Universal Serial Bus)-A connector plugs directly into USB (Universal Serial Bus) ports & charges in just 4 hours Blindingly Bright
- With 200 lumens of output Blinder is a seriously bright option for any cyclist. Efficient Chip on Board (COB) LEDs provide maximum brightness for up to 90% of the battery burn time Specification: Bulb Type
- Chip On Board (COB) LEDs Light Output Max
- 200 lumens Run Time
- Max Steady: 2.5 hrs Eco-Flash: 60 hrs Charge Time
- 4 hours Waterproof
- Yes IP67 Rating Light Modes
- 8 Fits Handle Bars
- 22
- 32mm+ diameter plus head tubes to 7.9 inches Rechargable
- Yes (integrated USB (Universal Serial Bus)-A connector)

Dimensions
- H: 43 mm x W: 43 mm x L: 46 mm Weight
- 34 grams Low Battery Indicator
- Yes Strap Material
- Medical Grade Silicone Operating Temperature
- -20 to 50 °C / -4 to 122 °F Optimum Charging Temperature
- 20 to 22 °C / 68 to 72 °F (Room Temperature).





















...

Using new Chip On Board (COB) technology the Blinder Rear Bike Light produces a punchy 100 lumens & is brilliant for attracting attention on the road or trail in all light conditions. Blinder is one of Knogs most individual rear bike lights ever adding serious personality to you ride
Features: Easy On Easy Off
- Blinder comes with a tool-less removable silicone strap for seat posts 22 – 32mm in diameter. Mounting is incredibly simple & using silicone straps means there’ll be no chance of damaging your bike Charge Indicators
- When your Blinder is running low on battery a red LED will light up next to the button. This ring will turn green & then turn off once the Blinder is fully charged Integrated USB (Universal Serial Bus) Connector
- No charging cable is required. Blinders integrated USB (Universal Serial Bus)-A connector plugs directly into USB (Universal Serial Bus) ports & charges in just 4 hours Blindingly Bright
- With 100 lumens of output Blinder is a seriously bright option for any cyclist. Efficient Chip on Board (COB) LEDs provide maximum brightness for up to 90% of the battery burn time Specification: Bulb Type
- Chip On Board (COB) LEDs Light Output Max
- 100 lumens Run Time
- Max Steady: 2.5 hrs Eco-Flash: 55 hrs Charge Time
- 4 hours Waterproof
- Yes IP67 Rating Light Modes
- 8 Fits Handle Bars
- 22
- 32mm+ diameter plus head tubes to 7.9 inches Rechargable
- Yes (integrated USB (Universal Serial Bus)-A connector)

Dimensions
- H: 43 mm x W: 43 mm x L: 46 mm Weight
- 34 grams Low Battery Indicator
- Yes Strap Material
- Medical Grade Silicone Operating Temperature
- -20 to 50 °C / -4 to 122 °F Optimum Charging Temperature
- 20 to 22 °C / 68 to 72 °F (Room Temperature).





















...

Spare rack mount for Blinder Link rear lights. ...