A simple precision-made component that provides valuable insurance against front derailleur malfunctions Specifically designed for the extreme conditions of cyclo-cross it is designed to give the rider the confidence to front-shift in any situation It acts a ramp to guide your chain & virtually eliminates the possibility of your chain dropping off the small chainring onto the bottom bracket helping to protect your frame & keep you in gear Highly recommended to prevent structural damage to carbon & aluminium frames but also protects the finish of any other frame material Clamps onto the frame independently of the front derailleur mount using its own lightweight clamp so requires some round seat tube in the area below the derailleur The XL extra-long version is suitable for frames with a flared seat-tube where the clamp has to be mounted higher up where there is round tubing Designed to work with all double chainring bikes Made from 6061 T6 heat treated aluminium Long-lasting protective anodised finish Adds only 22 grams of weight K-Edge products are proudly CNC machined in the USA & have a Lifetime warranty: you break it well replace it ...

The ultimate in lightweight mountain bike chain catchers Designed to work with all double chainsets (adjustable for size) with external bottom bracket bearings It acts as a ramp to guide your chain & virtually eliminates the possibility of your chain dropping off the small chainring onto the bottom bracket helping to protect your frame & keep you in gear Please note this is not a DH chain device & is designed to help eliminate chain drop while shifting rather than guiding your chain around the chainring Mounts in place of a 2.5 mm spacer Adds only 17 grams of weight Made from 6061-T6 heat treated aluminium Long-lasting protective anodised finish K-Edge products are proudly CNC-machined in the USA & have a Lifetime warranty: you break it well replace it ...

The ultimate in lightweight mountain bike chain catchers Designed to work with Shimano triple chainsets with external bottom bracket bearings & an inner chainring of 22 to 26 teeth It acts a ramp to guide your chain & virtually eliminates the possibility of your chain dropping off the small chainring onto the bottom bracket helping to protect your frame & keep you in gear Mounts in place of a 2.5 mm spacer Adds only 17 grams of weight Made from 6061 T6 heat treated aluminium Long-lasting protective anodised finish K-Edge products are proudly CNC machined in the USA & have a Lifetime warranty: you break it well replace it ...

The affordable upgrade for the Garmin computer. The K-Edge aero Garmin mount was developed for Team SKY who requested a more aerodynamic mount for the 2014 Tour de France. The goal was to place the Garmin Edge computer as close to the handlebar as possible & have an aerodynamic leading edge... By combining these updates with efficient manufacturing in house the Sport Mount was born. The K-Edge definitive click makes it clear that your Garmin is locked on tight Suitable for use with the Garmin Edge 500 & 800 series Compatible: 31.8mm diameter handlebars 100% carbon bar safe NOT COMBO COMPATIBLE Lifetime Guarantee ...

A precision-made secure mount for your Garmin Edge Compatible with all Edge units that utilise the quarter turn bike mount system & is fully adjustable for the different size units The Garmin unit is nestled between the aero-bars giving the user an enhanced view of the data Positions the Garmin computer in a very aerodynamic location Long-lasting protective anodised two-tone fade finish Features a plastic insert that is kind to your computer & can be rotated through 90 degrees via locking mechanism Fits 22.2 mm aero bars Weighs only 30 g K-Edge products are proudly CNC machined in the USA & have a lifetime warranty: you break it well replace it ...

A 46g super light super strong Go Pro handlebar mount Fits 31.8mm diameter bars &

Includes:: all mounting hardware

...

A 46g super light super strong Go Pro handlebar mount Fits 31.8mm diameter bars &

Includes:: all mounting hardware

...

A 45g super light super strong Go Pro mount Designed to lock your camera securely underneath your saddle on the rails As used in the Tour de France Fits all standard 2-rail saddles including oversized carbon rails All mounting hardware included Made from 6061 T6 heat treated aluminium K-Edge products are proudly CNC machined in the USA & have a Lifetime warranty: you break it well replace it ...

Upgrade top cap with integrated Garmin 1/4 turn mount is ideal for Enduro style or downhill riding With the K-Edge CNCd aluminium Gravity cap mount you are guaranteed to have a secure platform for your computer ensuring that you can always read the display & push the buttons This mount is especially useful in fitting the larger Garmin Edge computers including Edge 1000 Mounting at the top of the steerer tube the mount replaces the standard top cap Follow fitting instructions carefully with all supplied hardware Compatibility 1 1-1/8 diameter steerer tube Weight is just 25 grams Lifetime Warranty ...

The adjustable MTB Stem Mount for 1/4 turn style Garmin Edge & Forerunner units is an advanced upgrade solution for cyclists who prefer their computer above the stem The adjustable (up or down) design allows for a variety of customisation no matter the length rise or drop of the stem Triathletes who have their bars taken up by a hydration system will still have a solid mount solution Adventure cyclists with carry bag systems attached to their stem can keep their computer clear of the straps With the K-EDGE CNCd aluminum adjustable Stem Mount youre guaranteed to have a secure platform for your computer ensuring that you can always read the display & push the buttons This mount is especially useful in fitting the larger Garmin 510 800 810 size computers above an array of stem configurations Mounting off of the steerer tube the mount replaces a standard 5 mm spacer & is locked securely in place by the top compression cap Compatibility 1-1/8 diameter steerer tube Weight is just 25 grams Lifetime Warranty ...