Specifically designed for 27.5” & 29” wheeled MTB’s. The De Fender™ RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet & sloppy rides. Quick release allows De Fenders to be installed & removed in seconds. A highly polished underside helps prevent dirt buildup & aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. ATTACHMENTS QR seatpost attachment ADJUSTMENT Rear angle adjustable MATERIAL Two tone injected high impact resistant plastic SIZE 61 x 18 x 10 / 24” x 7.1” x 3.9” WEIGHT 226 g / oz ...

For 26 Wheel The De Fender™ RX (rear fender) is the perfect choice for lightweight durable mud protection on those wet & sloppy rides. Quick release allows De Fender to be installed & removed in seconds. A highly polished underside helps prevent dirt buildup & aids in cleaning. ATTACHMENT QR seatpost attachment ADJUSTABLE Rear angle adjustable MATERIAL Two tone injected high impact resistant plastic ADDED FEATURE Highly polished underside SIZE 55.9 x 15.2 x 10.2 cm / 22” x 6” x 4” WEIGHT 200 g / 7.04 oz ...

Defender fenders are the perfect complement to any mountain bike. Special design allows the rear fender to be adjusted to fit both hard-tails & full suspension. Quick release seatpost attachment & clip-off front fender means you can install & remove these fenders in seconds. • Wide profile for maximum coverage• Rear is fully adjustable in height & angle• Cool motocross profile looks good on both hard-tail & full suspension bikes• Durable injection-moulded nylon construction• Quick release • Lightweight: 200g ...

De Fender TX is a compact trekking bike fender set. Adjustable aluminum struts with QR levers for quick perfect alignment & good tire coverage. The De Fender TX set is made from high impact plastic & the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. ATTACHMENTS Brake bolt & fork eyelets attachment (front) Seat tube & seatstay or chainstay eyelets attachment ADJUSTMENT Adjustable angle & position for perfect tire coverage MATERIAL Injected high impact resistant plastic with alumimun struts SIZE 56.8 x 13.7 x 8.4 cm /22.4” x 5.4” x 3.3” (Front)77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear) WEIGHT 192 g / 6.77 oz (Front)245 g / 8.64 oz (Rear) ...

De Fender TX is a compact trekking bike fender. Adjustable aluminum struts with QR levers for quick perfect alignment & good tire coverage. The De Fender TX is made from high impact plastic & the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. ATTACHMENTS Seat tube & seatstay or chainstay eyelets attachment ADJUSTMENT Adjustable angle & position for perfect tire coverage MATERIAL Injected high impact resistant plastic with alumimun struts SIZE 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear) WEIGHT 245 g / 8.64 oz ...

For 26 Wheel The XC1 is a two-piece moto inspired front fender that attaches to the suspension fork lowers for a closer fit to the tire & excellent mud / spray protection. A precision clamp assembly secures the fender to the fork lower legs & a special safety feature allows it to disengage if a large obstruction enters the wheel. The XC11 is a lightweight removable rear fender providing exceptional mud / spray protection. Multiple pivots allow easy fender angle adjustment for a perfect fit while the quick release clamp adjusts to fit 25.4 mm
- 34.9 mm seatposts. Both fenders feature a highly polished underside to prevent mud buildup & aids in cleaning. Fits MTB 26” tires up to 26” x 2.6”. ATTACHMENT (FRONT) Two pieces QR bolt-on fork attachment fits ø36
- ø48.5 mm fork legs (XC1) ATTACHMENT (REAR) QR slip joint clamp fits ø25.4
- ø34.9 mm seatposts (XC11) ADJUSTABLE Multiple angles adjustable (XC11) MATERIAL Two tone injected high impact resistant plastic ADDED FEATURES Automatic obstruction disengagement (XC1) Highly polished underside SIZE 33 x 24 x 19 cm / 13” x 9.4” x 7.5” (XC1 FF)23 x 40 x 29 cm / 9.1” x 15.7” x 11.4” (XC1 FR)56 x 10.2 x 6.8 cm / 22” x 4” x 2.7” (XC11) WEIGHT 350 g / 12.32 oz (XC1)202 g / 7.11 oz (XC11)


...

For 29 Wheel The XC1 is a lightweight two-piece moto inspired front fender that attaches to the suspension fork lowers for a closer fit to the tire & excellent mud/spray protection. A precision clamp assembly secures the fender to the fork’s lower legs & a special safety feature allows it to disengage if a large obstruction enters the wheel. The XC11 is a lightweight removable rear fender designed for exceptional mud/spray protection & built specifically for 29er mountain bikes. Multiple pivots allow for easy fender angle adjustment while the quick release clamp adjusts to fit ø25.4
- ø34.9 mm seatposts. Advanced high impact plastic is co-molded to a flexible trailing edge for resistance to impacts while the highly polished underside of the fenders prevents dirt buildup in extreme muddy conditions. Fits MTB 29” tires up to 29” x 2.5”. ATTACHMENT (FRONT) Two pieces QR bolt-on fork attachment fits ø36
- ø48.5 mm fork legs (XC1) ATTACHMENT (REAR) QR slip joint clamp fits ø25.4
- ø34.9 mm seatposts (XC11) ADJUSTABLE Multiple angles adjustable (XC11) MATERIAL Two tone injected high impact resistant plastic ADDED FEATURES Automatic obstruction disengagement (XC1) Highly polished underside SIZE 33 x 24 x 19 cm / 13” x 9.4” x 7.5” (XC1 FF)23 x 40 x 29 cm / 9.1” x 15.7” x 11.4” (XC1 FR)67 x 10.2 x 7.5 cm / 26.4 x 4 x 3 (XC11) WEIGHT 350 g / 12.32 oz (XC1)220 g / 7.74 oz (XC11)


...

For 26 Wheel De Fender™ XC11 is an elegant lightweight & compact removable rear fender. A secure quick release clamp adjusts from ø25.4 mm to ø34.9 mm while multiple pivots articulate the fender for a perfect fit. High impact plastic is co-molded with flexible material for greater durability & the highly polished underside helps prevent dirt buildup & aids in cleaning. Fits MTB 26” tires up to 26” x 2.6” ATTACHMENT QR slip joint clamp fits ø25.4
- ø34.9 mm seatposts ADJUSTABLE Multiple angles adjustable MATERIAL Two tone injected high impact resistant plastic ADDED FEATURE Highly polished underside SIZE 56 x 10.2 x 6.8 cm / 22 x 4 x 2.7 WEIGHT 202 g / 7.11 oz
...

For 29 Wheel The XC11-29er is a lightweight removable rear fender designed for exceptional mud/spray protection & built specifically for 29er mountain bikes. Multiple pivots allow for easy fender angle adjustment while the quick release clamp adjusts to fit ø25.4
- ø34.9 mm seatposts. Advanced high impact plastic is co-molded to a flexible trailing edge for resistance to impacts while the highly polished underside of the fenders prevents dirt buildup in extreme muddy conditions. Fits MTB 29” tires up to 29” x 2.5”. ATTACHMENT QR slip joint clamp fits ø25.4
- ø34.9 mm seatposts ADJUSTABLE Multiple angles adjustable MATERIAL Two tone injected high impact resistant plastic ADDED FEATURES Highly polished underside SIZE 67 x 10.2 x 7.5 cm / 26.4” x 4” x 3” WEIGHT 220 g / 7.74 oz

...

For 27.5 (650B) Wheel De Fender™ XC11 is a lightweight removable rear fender providing exceptional mud/spray protection. Multiple pivots allow easy fender angle adjustment for a perfect fit while the quick release clamp adjusts to fit ø25.4
- ø34.9 mm seatposts. Advanced high impact plastic is co-molded to a flexible trailing edge for resistance to impacts. Features a highly polished underside to prevent mud buildup & aids in cleaning. ATTACHMENT QR slip joint clamp fits ø25.4
- ø34.9 mm seatposts ADJUSTABLE Multiple angles adjustable MATERIAL Two tone injected high impact resistant plastic ADDED FEATURE Highly polished underside SIZE 62 x 10.2 x 7 cm / 24.4 x 4 x 2.8 WEIGHT 215 g / 7.57 oz

...