This lightweight mountain bike saddle is ultra-light with a FACT™ carbon fibre shell tuned for racing stiffness. The S-Works Phenom features a rounded anti-snag tail & the perfect amount of padding for all-day rides.> Patented Body Geometry design is lab tested to assure blood flow to sensitive arteries> Super-light EVA padding for comfort & support on longer rides> Low friction panels on the nose & tail improve pedalling efficiency & rider mobility while moving ‘on & off’ the back of the saddle> FACT™ carbon fibre shell is flex-tuned for support & ride compliance> Ultra-light & strong oversized FACT™ carbon rails> Level 2 padding: Medium density foam; bike feel with additional cushioning> NOTE: Oversized 7x 9mm carbon rails not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails ...

The S-Works Phenom is a top-of-the-line lightweight all-terrain saddle that features a FACT carbon fiber shell thats specifically tuned for the stiffness required of racing. & with a rounded anti-snag tail & the perfect amount of padding youll find it be more than ready for all-day rides both on-and off-road. Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. Super-light EVA padding for comfort & support on longer rides. FACT carbon fiber shell is flex-tuned for support & ride compliance. Ultra-light oversized FACT carbon rails. Level 2 padding: Medium density foam for bike feel with additional cushioning. SWAT™-compatible mounts molded into the saddle base allow for sleek & integrated storage solutions. NOTE: Oversized 7x 9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails. Size 143mm / Weight 149g Size 155mm / Weight 154g ...

The S-Works Power Arc saddle expands on the success of our original S-Works Power saddle while featuring the same channel & length as the original. This means that it features a stiff FACT carbon fiber shell & rails & lightweight EVA padding. The shape of the saddle is also designed to provide ample sit bone support & this has been coupled with a shorter-than-usual nose section to keep pressure off of soft tissue while riding in aggressive positions. We even took this ideology a step further via an extra wide & elongated Body Geometry channel thats been proven through blood flow testing & pressure mapping to reduce numbness & pressure on unwanted areas. & while this all seems familiar if youre already a Power loyalist this iteration features a curved Body Geometry shape that better contours to your body. What does this mean for your ride? It means that youll feel as if youre “in the saddle not on it. & ultimately this equates to greater comfort & superior performance in all seated positions whether youre a man or woman. Patented Body Geometry design is lab-tested for both men & women to ensure blood flow to sensitive arteries. Stiff FACT carbon fibre shell is tuned for support & ride compliance. Super-light EVA padding for comfort & support on longer rides. Ultra-light strong & oversized FACT carbon rails. Level 2 padding: Medium density foam for bike feel with additional cushioning. SWAT™-compatible mounts moulded into the saddle base allow for sleek & integrated storage solutions. Size 143mm / Weight: 141g Size 155mm / Weight: 145g ...

For as long as thereve been saddles women have been having issues with them. But where some see unsolvable problems we see practical solutions. With our patented design MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. & when you combine this technology with our extremely lightweight S-Works Power saddle with its stiff FACT carbon shell & rails you get a high-performance saddle thats designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know & love so you can be assured of superior all-day comfort in any ride position. Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. Innovative MIMIC technology uses multilayered materials to maintain equilibrium & minimize swelling in soft tissue. FACT carbon fiber shell is flex-tuned for support & ride compliance. Ultra-light oversized FACT carbon rails. Level 2 padding: Medium density foam for bike feel with additional cushioning. SWAT™-compatible mounts molded into the saddle base allow for sleek & integrated storage solutions. NOTE: Oversized 7x 9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails. Size 143mm / Weight 170g Size 155mm / Weight 173g ...

The S-works Power with Mirror technology is the perfect reflection of you. We’re redefining comfort & performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened decades ago with the introduction of foam. To develop a next-generation saddle we had to look beyond foam & develop a next-generation technology. The S-Works Power Saddle with Mirror is the future. We developed Mirror technology by 3D printing from a liquid polymer to perfectly reflect your anatomy. This revolutionary process creates a complex honeycomb structure that allows us to infinitely tune the material’s density in a way impossible with foam. The result is a patent-pending matrix of 14000 struts & 7799 nodes each of which can be tuned individually. & when you combine this technology with our extremely lightweight S-Works Power saddle with its flexed-tuned FACT carbon shell & ultra-light rails you get a high-performance saddle thats designed to help you perform at your best. It features all of the Body Geometry design characteristics you know & love so you can be assured of superior all-day comfort for your unique position. Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support & comfort. FACT carbon fiber shell is flex-tuned for support & ride compliance. Ultra-light oversized FACT carbon rails. SWAT™-compatible mounts molded into the saddle base allow for sleek & integrated storage solutions. NOTE: Oversized 7x 9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails. Size 143mm / Weight 190g Size 155mm / Weight: 194g ...

When we set out to improve the original S-Works Prevail we knew that we had our work cut out for us. How could we improve on the industry benchmark for fit ventilation & comfort? By listening to our riders—that’s how. Through this we realised that there were a few aspects of the original Prevail that needed to be changed with the biggest request being for a lower-sitting design. We thought to ourselves thinking big shouldnt result in bigger helmets so with the Prevail II we set out to prove that big ideas can come in smaller packages. It all starts with our patented EPS construction that relies on multi-density foam thats paired with a robotically woven Aramid-reinforced skeleton. This comes with a reduction in the overall size creating a smaller profile that fits lower down on the head for a better fit & safety. It also has deep internal channels that are aligned from front-to-rear so the air intake & exhaust are optimized for unparalleled cooling over the entyre head. & in the Win Tunnel we found these new designs amounted to six seconds saved over 40km when compared to a standard road helmet. Another standout feature of the S-Works Prevail II is the Gutter Action System that manages the flow of sweat keeping it away from your eyes & dripping it off of the pads over your temple. In the end the S-Works Prevail II is the most complete lightweight race helmet weve ever made—perfect for hot mountainous rides & flat windy sections alike.> Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy.> Patented aramid-reinforced skeleton provides internal EPS support.> Ultra-light Mindset Hair Port II micro-dial fit system with height adjustability for the perfect fit.> Mega Mouthport optimizes cooling & sweat evaporation.> Aerodynamic design.> 4th Dimension Cooling System with deep internal channels large vents & aligned exhaust ports.> Thin soft & lightweight 4X Dry Lite webbing won’t stretch out with sweat or water.> Tri-Fix web splitter for enhanced comfort & ease of strap adjustments.> Instrap webbing system for ultra-light construction & security.> Gutter Action brow pad design for increased comfort & sweat management.> Reflective decals for increased visibility to motorists in low-light conditions.> Patented clip-on visor included. ...

The S-Works Prevail II is the most complete lightweight race helmet weve ever made. It combines incredible ventilation with superlative aerodynamic design & an ultra-lightweight construction in order to achieve the best all-around performance available on the market today. Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. Patented Aramid-Reinforced Skeleton provides internal EPS support. Ultra-light Mindset II micro-dial fit system with height adjustability for the perfect fit. Mega Mouthport optimizes cooling & sweat evaporation. Aerodynamic design. 4th Dimension Cooling System with deep internal channels large vents & aligned exhaust ports. Thin soft & lightweight 4X Dry Lite webbing won’t stretch out with sweat or water. Tri-Fix web splitter for enhanced comfort & ease of strap adjustments. Instrap webbing system for ultra-light construction & security. Gutter Action brow pad design for increased comfort & sweat management. Reflective decals for increased visibility in low-light conditions. Patented clip-on visor included. ...

The S-Works Prevail II is the most complete lightweight race helmet weve ever made. It combines incredible ventilation with superlative aerodynamic design & an ultra-lightweight construction in order to achieve the best all-around performance available on the market today. Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. Patented Aramid-Reinforced Skeleton provides internal EPS support. Ultra-light Mindset II micro-dial fit system with height adjustability for the perfect fit. Mega Mouthport optimizes cooling & sweat evaporation. Aerodynamic design. 4th Dimension Cooling System with deep internal channels large vents & aligned exhaust ports. Thin soft & lightweight 4X Dry Lite webbing won’t stretch out with sweat or water. Tri-Fix web splitter for enhanced comfort & ease of strap adjustments. Instrap webbing system for ultra-light construction & security. Gutter Action brow pad design for increased comfort & sweat management. Reflective decals for increased visibility in low-light conditions. Patented clip-on visor included. ...

The S-Works Prevail II Team is the most complete lightweight race helmet Specialized have ever made—perfect for hot mountainous rides & flat windy sections alike. Ride like the peloton today. When Specialized set out to improve the original S-Works Prevail they knew that they had our work cut out. How could they improve on the industry benchmark for fit ventilation & comfort? By listening to riders—that’s how. Through this Specialized realized that there were a few aspects of the original Prevail that needed to be changed with the biggest request being for a lower-sitting design. Thinking big shouldnt result in bigger helmets so with the Prevail II they set out to prove that big ideas can come in smaller packages. It all starts with our patented EPS construction that relies on multi-density foam thats paired with a robotically woven Aramid-reinforced skeleton. This comes with a reduction in the overall size creating a smaller profile that fits lower down on the head for a better fit & safety. It also has deep internal channels that are aligned from front-to-rear so the air intake & exhaust are optimized for unparalleled cooling over the entire head. & in the Win Tunnel we found these new designs amounted to six seconds saved over 40km when compared to a standard road helmet. Another standout feature of the S-Works Prevail II Team is the Gutter Action System that manages the flow of sweat keeping it away from your eyes & dripping it off of the pads over your temple. In the end the S-Works Prevail II Team is the most complete lightweight race helmet theyve ever made—perfect for hot mountainous rides & flat windy sections alike.> Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy.> Patented aramid-reinforced skeleton provides internal EPS support.> Ultra-light Mindset Hair Port II micro-dial fit system with height adjustability for the perfect fit.> Mega Mouthport optimizes cooling & sweat evaporation.> Aerodynamic design.> 4th Dimension Cooling System with deep internal channels large vents & aligned exhaust ports.> Thin soft & lightweight 4X Dry Lite webbing won’t stretch out with sweat or water.> Tri-Fix web splitter for enhanced comfort & ease of strap adjustments.> Instrap webbing system for ultra-light construction & security.> Gutter Action brow pad design for increased comfort & sweat management.> Reflective decals for increased visibility to motorists in low-light conditions.> Patented clip-on visor included. ...

Replacement pads for all Prevail II MIPS helmets. This padset is not compatible with older non-MIPS Prevail II Helmets ...