The Plug Bike Light Twinpack is a light set inspired by Knog’s roots & comes in overmolded soft touch TPU (rubber like material). The Plug Twinpack

Includes:: an effective 250 lumen front light & is paired with a 10 lumen rear light. Packed with features including a low battery indicator cut-outs in the front light body for enhanced side visibility & like all Knog bike lights both the front & rear lights are USB (Universal Serial Bus) rechargeable. Designed to work with all genres of bicycles from commuters to road bikes each light in the set also comes with two different sized silicone bands for securing it to handlebars & seatposts (including aero).
Features: Increased Side Visibility
- Cutouts in the side of the Plug design result in enhanced side visibility. Given the fact that 78% of accidents happens with cars not seeing bikes at intersections any additional visibility from the side can only be a good thing Easy One Button Operation
- The Plug’s oversize button allows the user to turn the light on & off with ease even when wearing gloves USB (Universal Serial Bus) Rechargeable
- Recharge via the micro USB (Universal Serial Bus) port behind the large rear button using a micro USB (Universal Serial Bus) cable (not included) Low Battery Indicator
- A conveniently placed low battery indicator within the lens will let you know when your light needs recharging Specification: Bulb Type
- LED Light Output Max
- Front: 250 lumen Rear: 10 lumen Run Time
- Max Steady: 1.5/3 hrs Eco-Flash: 240+/100+ hrs Charge Time
- 2.5 hours Waterproof
- Yes IP66 Rating Light Modes
- 5 Fits Handle Bars
- 22
- 32mm+ diameter plus head tubes to 7.9 inches Rechargable
- Yes (micro USB (Universal Serial Bus) port)

Dimensions
- H: 43 mm x W: 33 mm x L: 75 mm / H: 40 mm x W: 30 mm x L: 50 mm Weight
- 65 grams / 34 grams Low Battery Indicator
- Yes Strap Material
- Medical Grade Silicone Operating Temperature
- -20 to 50 °C / -4 to 122 °F Optimum Charging Temperature
- 20 to 22 °C / 68 to 72 °F (Room Temperature)























...

The Plug Rear Bike Light harkens back to Knog’s roots using overmolded soft touch TPU in three fun colours. Kicking out 10 lumens this light is packed with features including a low battery indicator rear domed lens & like all Knog bike lights its USB (Universal Serial Bus) rechargeable. Designed to work with all genres of bicycles from commuters to road bikes the Plug comes with two silicone bands for securing it to seat posts
- including aero posts.
Features: Increased Side Visibility
- The specially designed domed rear lens increases side visibility ensuring youll be better seen. Easy One Button Operation
- The Plug’s oversize button allows the user to turn the light on & off with ease even when wearing gloves Low Battery Indicator
- A conveniently placed low battery indicator within the lens will let you know when your light needs recharging USB (Universal Serial Bus) Rechargeable
- Recharge using the micro USB (Universal Serial Bus) port conveniently located behind the large rear button (micro USB (Universal Serial Bus) cable not supplied) Specification: Bulb Type
- LED Light Output Max
- 10 lumen Run Time
- Max Steady: 3 hours Eco-Flash: 100+ hours Charge Time
- 2.5 hours Waterproof
- Yes IP66 Rating Light Modes
- 5 Fits Handle Bars
- 22
- 32mm+ diameter plus head tubes to 7.9 inches Rechargable
- Yes (micro USB (Universal Serial Bus) port)

Dimensions
- H: 40 mm x W: 33 mm x L: 50 mm Weight
- 30 grams Low Battery Indicator
- Yes Strap Material
- Medical Grade Silicone Operating Temperature
- -20 to 50 °C / -4 to 122 °F Optimum Charging Temperature
- 20 to 22 °C / 68 to 72 °F (Room Temperature)






















...

The 350L Plugger is Knogs best value light &40;lumens per pound&41; & meets a great price point. The Plugger features overmoulded ...

The Plugger Twinpack is a light set inspired by Knog’s roots & comes in overmolded soft touch TPU (rubber like material). The Plugger Twinpack

Includes:: a powerful 350 lumen front light & is paired with a 10 lumen rear light. Packed with innovative touches like a low battery indicator cut-outs in the front light body for enhanced side visibility & like all Knog bike lights both the front & rear lights are fully USB (Universal Serial Bus) rechargeable. Designed to work with all genres of bicycles from commuters to road bikes each light in the set also comes with two different sized silicone bands for securing it to handlebars seat stays & of course seatposts. The Plugger Twinpack is perfect as an every-day light set. Easy Operation - Just like the Plug turning Plugger on & off is childs play. The large size of the rubber button also allows the user to operate the light when wearing gloves or while riding at speed. Additional Side Visibility - 79% of accidents occur at junctions when cars dont see cyclists from the side & Thanks to the side cut outs in the front light & the domed lens of the rear Plugger offers helpful additional side visibility. A Design Homage - The Plug family harkens back to some the early days of Knog design calling on aesthetically pleasing & sleek cylindrical shapes that look beautiful on & off the bike. SPECIFICATION Lumens
- 350 Lumens (Front) / 10 Lumens (Rear). Batteries
- 780 m Ah (Front) / 220 m Ah (Rear).

Dimensions
- H: 87mm x W: 33mm. Weight
- 85 grams. Charge Time
- 5 hours. USB (Universal Serial Bus) Rechargeable. Soft touch rubber over-moulded TPU. Small & Medium (plus Large for Rear Plug) interchangeable straps for different frame tube shapes. MODE RUNTIME Eco Flash 180+ hrs Flash 12 hrs Pulse 4.5 hrs Medium 3.75 hrs Max 1.5 hrs








...

The Plugger Front Bike Light is a light inspired by Knogs roots & like its little sibling the Plug comes in overmolded soft touch TPU (rubber like material). The Plugger produces a powerful 350 lumens & is packed with features including a low battery indicator cut-outs in the front light body for enhanced side visibility & its USB (Universal Serial Bus) rechargeable. Designed to work with all genres of bicycles from commuters to road bikes the Plugger comes with two silicone bands for securing it to handlebars (22-27mm & 27-32mm). The Plugger is a light for every-day for every ride for everybody.
Features: Increased Side Visibility
- Cutouts in the side of the Plugger design result in enhanced side visibility. Given the fact that 78% of accidents happens with cars not seeing bikes at intersections any additional visibility from the side can only be a good thing USB (Universal Serial Bus) Rechargeable
- Recharging is via the micro USB (Universal Serial Bus) port conveniently located behind the large rear button (cable not supplied) Easy One Button Operation
- The Pluggers oversize button allows the user to operate with ease even when wearing gloves Low Battery Indicator
- The Pluggers clever side visibility window doubles as low battery indicator so you’ll know when exactly when your light needs recharging Specification: Bulb Type
- LED Light Output Max
- 350 lumens Run Time
- Max Steady: 1.5 hrs Eco-Flash: 180+ hrs Charge Time
- 5 hours Waterproof
- Yes IP66 Rating Light Modes
- 5 Fits Handle Bars
- 22
- 32mm+ diameter plus head tubes to 7.9 inches Rechargable
- Yes (micro USB (Universal Serial Bus) port)

Dimensions
- H: 43 mm x W: 33 mm x L: 87 mm Weight
- 85 grams Low Battery Indicator
- Yes Strap Material
- Medical Grade Silicone Operating Temperature
- -20 to 50 °C / -4 to 122 °F Optimum Charging Temperature
- 20 to 22 °C / 68 to 72 °F (Room Temperature)





















...

A spare strap for the Plus Light range. The short strap fits bars 22-27mm & the long strap fits bars 28-32+mm. ...

The Plus Bike Light Twinpack is a super-bright set that can be mounted on your bike or clipped onto your clothing helmet backpack etc. Equally impressive as primary or secondary bike lights Plus is perfect for commuters & road cyclists alike Our most versatile bike lights ever. Mount to your handlebar front fork or remove from the mount & clip it onto just about anything.
Features: Be seen from up to 450 metres away Latest COB Technology
- Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time. Integrated USB (Universal Serial Bus) Connector
- Plus plugs directly into USB (Universal Serial Bus)-A ports & is designed to be exposed to the elements. Just remove from it’s magnetic mount & you’re ready to charge. Charge Indicators
- When Plus is running low on battery a red ring will light up around the button. This ring will also show when charging & turn off once fully charged Mount It Or Wear It
- Mount on the handlebar head tube forks... anything goes. Or remove from the mount & it now doubles as a wearable running light or versatile camping light. Specifications: Bulb Type
- Chip On Board (COB) LEDs Light Output
- 40 Lumens/ 20 Lumens Run Time
- Eco-Flash: 40 hrs Steady: 2 hrs Charge Time
- 2 hrs Waterproof
- Yes IP67 rating Light Modes
- 5 Fits Handle Bars
- 22 – 32mm+ diameter Rechargable
- Yes (integrated USB (Universal Serial Bus)-A connector)

Dimensions
- H: 66 mm x W: 24 mm x L: 14 mm Weight
- 17 grams Low Battery Indicator
- Yes Straps
- Small (22
- 32 mm) & large included (Up to 200 mm) Operating Temperature
- -20 to 50 °C / -4 to 122 °F Optimum Charging Temperature -20 to 22 °C / 68 to 72 °F (Room Temperature)




















...

The Plus Rear Bike Light
- A super-bright light that can be mounted on your bike or clipped onto your clothing helmet backpack
...

PWR Mountain Kit has everything you need to keep you well lit for trail & mountain biking. It contains the 2000 lumen PWR Mountain Bike Extension Mount & Helmet Mount. Not only is PWR Mountain a high power headlight but simply take the product apart & you have much more. A lighthead for other PWR bike & camping lights plus a PWR Bank to charge devices that is also the battery for all products in the PWR range. Use the PWR Bar-To-Frame Mount to hitch a lighthead to your handlebar with the Tri-prong Side Mount (Go Pro compatible) & the battery to your frame with the Frame Mount. Use th PWR Brakeboss Extension Mount to attach your Lighthead to the front frame of your bike or the Helmet Mount to attach the light to compatible helmets. The PWR Mountain uses a circular beam for flood lighting obstacles from unpredictable angles incorporates twist mode operation (turn the light on & off twisting the lighthead
- no buttons) & gives you the option to program your brightness & runtime through our Mode Maker app. KIT CONTAINS Large PWR bank (10000 m Ah). 2000 Lumen PWR Mountain lighthead. Brakeboss Bike extension mount. Helmet mount. Side mount. Frame mount. Tri-prong side mount (Go Pro compatible). Large mount. RUNTIME MODE LUMENS RUNTIME Max 2000 2hrs Mid 500 9hrs Stamina 200 30hrs Pulse 1000 20hrs Strobe Flash 250 35hrs Eco-Flash 150 200hrs FEATURES PWR is an ecosystem of bike & outdoor products designed to share their battery. But that battery also works as a power bank to charge your devices. PWR Mountain runs for 2 hours at 2000 lumens or up to 200 hours in Eco-flash mode. Elliptical beam - Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Programs your modes - The Mode Maker app lows you to design the modes for any PWR bike light. Simply plug in your light then select & tailor modes from the menu. You can do things such as control brightness adjust runtimes & add new light modes. Functionality - Twisthead operation to turn light on / off & to scroll through light modes (no buttons). Charge your devices - Rear of the light is a USB (Universal Serial Bus) rechargeable power bank. Use this to charge your phone Go Pro or cycle computer on the go. 1 hour riding @2000 lumens means you can almost fully charge your iPhone twice. Charge time 7 hours. SPECIFICATION Light output: 2000 Lumens. Power Bank: 10000 m Ah. Dimensions: 129.5 x 48mm ∅. Weight: 335g. Battery indicator. Charges your devices. CNC Machined. Programmable modes. Interchangeable lightheads. Twist operation. USB (Universal Serial Bus) rechargable. Water resistant when cap is on. INSTRUCTIONS Connect lighthead to PWR bank: Insert the two lighthead plug pins into the battery. When connected your lightheads LEDs will flash. Connect lighthead to sidemount: Slide the mount into the slot on the side of the battery. Then tighten the thumbwheel. To remove the mount you will need to loosen the thumbwheel. Operation: Once the lighthead & battery are connected twist the lighthead & hold to turn on twist & release to change modes.
...

Recharge your devices on the go with this 10000 m Ah power bank & stay out for longer. PWR Bank is also part of Knogs PWR Modular System an ecosystem of bike & outdoor products designed to share their battery. So with the addition of a PWR light head or mount you can turn this PWR Bank into a powerful flashlight or front bike light. A super tough & durable 10000 m Ah power bank & potential for so much more you decide. FEATURES Compatibility - The 10000m Ah PWR Bank is compatible with the 600 1000 & 2000 lumen PWR lightheads & PWR outdoor products. Charge your devices - Use this PWR Bank to charge your iPhone or cycling computer on the go. Battery - USB (Universal Serial Bus) Rechargeable Lii-ion battery. Accessories Included - Micro USB (Universal Serial Bus) cable. SPECIFICATION Battery output: 10000 m Ah. Diameter: 48mm & Oslash;. USB (Universal Serial Bus)-A output Can hold multiple device charges Mini USB (Universal Serial Bus) rechargeable (cable included) Waterproof with IP66 rating when protective cap on (storm proof) Can power other products in the PWR Modular System Tough & durable aluminium housing Charge / capacity indicators Quick Charge Long Lasting The Large PWR Bank is a USB (Universal Serial Bus) rechargeable Li-ion battery with a charge time of 7 hours. The 4 LEDs on the side light up sequentially when charging & also show how much capacity you have left. One Battery Many Uses Its a brilliant standalone power bank but add a PWR Light head Mount or Lanyard & create another product completely. INSTRUCTIONS Charging your PWR bank: PWR Banks use a micro USB (Universal Serial Bus) input to charge. Using the micro USB (Universal Serial Bus) cable provided you can plug this into any powered USB (Universal Serial Bus) port or USB (Universal Serial Bus) wall plug charger. Charging devices with your PWR bank: To charge a device connect the devices charge cable to the female USB (Universal Serial Bus) port on the front of the PWR Bank & plug the other end of the USB (Universal Serial Bus) cable into an available powered USB (Universal Serial Bus) port. ...