Wireless flush-mounted dimming button for expansion of RSL wireless switching system. This wall switch has an integrated flush-mounted dimmer. Thus, the flush-mounted dimmer can be operated directly not only via the wall switch, but also via other wireless wall switches or RSLT remote control. Designed for mounting in flush-mounted socket. ...

It always is the case than an existing wall switch cannot be used as it was originally thought to due to structural changes or by shifting the furniture. Furthermore, the dimming of the lamps become much more pleasant than the normal switch on & off Simply replace the existing wall switch by the wall button obtained in the set with wireless receiver. It only needs to be connected to the existing cable (N, L, & switched L) at the receiver. Now the new button can be used as the old wall switch. This new button can also be in addition controlled by the wireless wall button included in the set or any other remote control of the RSL wireless switching system by the built-in wireless receiver. Simply attach this additional wall switch wherever you want by sticking or screwing. There can be no simpler way to change extpand or retrofit switches on dimming operation in the existing electrical installation. ...

Radio-controlled dimmer for flush mounting. Convenient dimming & switching. The phase control dimmer can be operated both via an external connectable button or, more conveniently, via one of the FS20 system remote controls. The dimmer can actuate standard light bulbs & conventional halogen lamp transformers (no electronic transformers). Load range: 230 V/25-120 VA /normal, (e.g. in lightweight wall constructions), 180 VA (with good heat discharge, e.g. in solid stone walls). The dimmer has a number of selectable operating modes: In addition to the normal switching & dimming 3 timers are available: off-timer (e.g. for staircase lighting), a slow-on & a slow-off timer, each of them 1 s to 4.5 h. ...

The problem-solver for the discrete fitting of a wireless switch. The radio switch can be controlled using an external switch, one of the remote controllers or the code lock KM 300 CAC & can switch loads up to 16 A (230 V AC). Along with the purely manual control a switch-off timer is also available, which can be programmed for the turn-on times between 1 s & 4.5 h. In this way, one can never forget turning it off in the bathroom, corridor, garage, outdoors, etc. ...

Suitable wireless-window contact for energy-saving controller order no. 61 61 00. You can reduce the heating cost by the use of the window contact because a ventilation is automatically & quickly detected, as via the energy saving controller. The window contact sends a signal to the energy saving controller, after which it opens the window to close the radiator valve. The window contact is particularly recommended, if the heating element is not in the proximity of the window. Several energy-saving controllers can be attached ...

Your radio home centre not only provides convenient heating control with 8 radio actuators & up to 15 thermostats. It also allows controlling up to 15 components of the FS20 radio switching system. & you can combine a multitude of different functions & switching commands in so-called macros. Due to the bidirectional data transfer, the radio thermostats can report excessive temperature deviations to the Centre which then sends out an optical & an acoustic alarm. & in conjunction with the optionally offered telephone dialler device, you can even have the alarm sent to your mobile phone. ...

This wireless heat-sink thermostat system enables an individual heat-sink regulation for each room according to wishes & usage habits. The wireless system also spares you trouble with poorly used & controlled thermostats at places that are difficult to access. Simply replace the old velve head of the heat-sink by the electronic adjustng drive (no need to let out water from the heat sink). This operating part independent of the adjusting drive can be placed at any point & can be taken in hand for a comfortable programming at all times.
For extending the set in addition up to 7 adjusting drives (optionally available) can be controlled via the operating element.
...