The digital capacitive sensor pushbutton MT0.1 is an electronic input element to replace mechanical switches & pushbuttons. It can be glued behind tiles, glass, wood, carpets, plastic etc. & is automatically ready for operation after 2 seconds. Tapping the surface of these materials with your finger will produce an output signal. The cast electronics fulfils all the requirements in terms of tightness against water & dust, vandal-proofing & design freedom. An automatic calibration function continually compensates any environmental effects.
With a power consumption oftyp. 5 u A at 4.75
- 7 V / DC, he is eminently suitable for battery applications. Higher supply voltages up to 30V are permitted when using pre-resistor RV, however the operating current should be limited to 1 m A.

...

With wiring system in IP65 type of protection/67/69K is realized in the field level of an economical & rational wiring of sensors & actuators The sensor/actuator boxes of Phoenix Contact supply their major part there Instead of many individual directions from the control unit for the sensor/actuator box a main cable is laid & the sensors & actuators are directly attached on the place. The main cable is laid as hybrid cable & already contains the voltage supply & the control lines for the sensors or actuators. The distributor has 4.6 or 8 slots Maximum 16 sensors or actuators can be attached at a double-plated box. ...

With cabling systems in the degree of protection IP65/67/69K, a cost-effective & efficient wiring of sensors & actuators is implemented at the field level. The Sensor-/ Actuator boxes from Phoenix Contact better know their decisive participation. Instead of many individual lines, a main cable is laid & the sensors & actuators locally are directly connected on site from control unit to sensor / actuator box. The main cable is designed as a hybrid cable & contains the power supply & control cables for the sensors or actuators. The distributors are available with 4.6 or 8 slots. Max.16 sensors or actuators can be connected to a double-occupied box. ...

With cabling systems in the degree of protection IP65/67/69K, a cost-effective & efficient wiring of sensors & actuators is implemented at the field level. The Sensor-/ Actuator boxes from Phoenix Contact better know their decisive participation. Instead of many individual lines, a main cable is laid & the sensors & actuators locally are directly connected on site from control unit to sensor / actuator box. The main cable is designed as a hybrid cable & contains the power supply & control cables for the sensors or actuators. The distributors are available with 4.6 or 8 slots. Max.16 sensors or actuators can be connected to a double-occupied box. ...

With cabling systems in the degree of protection IP65/67/69K, a cost-effective & efficient wiring of sensors & actuators is implemented at the field level. The Sensor-/ Actuator boxes from Phoenix Contact better know their decisive participation. Instead of many individual lines, a main cable is laid & the sensors & actuators locally are directly connected on site from control unit to sensor / actuator box. The main cable is designed as a hybrid cable & contains the power supply & control cables for the sensors or actuators. The distributors are available with 4.6 or 8 slots. Max.16 sensors or actuators can be connected to a double-occupied box. ...

With cabling systems in the degree of protection IP65/67/69K, a cost-effective & efficient wiring of sensors & actuators is implemented at the field level. The Sensor-/ Actuator boxes from Phoenix Contact better know their decisive participation. Instead of many individual lines, a main cable is laid & the sensors & actuators locally are directly connected on site from control unit to sensor / actuator box. The main cable is designed as a hybrid cable & contains the power supply & control cables for the sensors or actuators. The distributors are available with 4.6 or 8 slots. Max.16 sensors or actuators can be connected to a double-occupied box. ...

With cabling systems in the degree of protection IP65/67/69K, a cost-effective & efficient wiring of sensors & actuators is implemented at the field level. The Sensor-/ Actuator boxes from Phoenix Contact better know their decisive participation. Instead of many individual lines, a main cable is laid & the sensors & actuators locally are directly connected on site from control unit to sensor / actuator box. The main cable is designed as a hybrid cable & contains the power supply & control cables for the sensors or actuators. The distributors are available with 4.6 or 8 slots. Max.16 sensors or actuators can be connected to a double-occupied box. ...

With cabling systems in the degree of protection IP65/67/69K, a cost-effective & efficient wiring of sensors & actuators is implemented at the field level. The Sensor-/ Actuator boxes from Phoenix Contact better know their decisive participation. Instead of many individual lines, a main cable is laid & the sensors & actuators locally are directly connected on site from control unit to sensor / actuator box. The main cable is designed as a hybrid cable & contains the power supply & control cables for the sensors or actuators. The distributors are available with 4.6 or 8 slots. Max.16 sensors or actuators can be connected to a double-occupied box. ...

With cabling systems in the degree of protection IP65/67/69K, a cost-effective & efficient wiring of sensors & actuators is implemented at the field level. The Sensor-/ Actuator boxes from Phoenix Contact better know their decisive participation. Instead of many individual lines, a main cable is laid & the sensors & actuators locally are directly connected on site from control unit to sensor / actuator box. The main cable is designed as a hybrid cable & contains the power supply & control cables for the sensors or actuators. The distributors are available with 4.6 or 8 slots. Max.16 sensors or actuators can be connected to a double-occupied box. ...

With cabling systems in the degree of protection IP65/67/69K, a cost-effective & efficient wiring of sensors & actuators is implemented at the field level. The Sensor-/ Actuator boxes from Phoenix Contact better know their decisive participation. Instead of many individual lines, a main cable is laid & the sensors & actuators locally are directly connected on site from control unit to sensor / actuator box. The main cable is designed as a hybrid cable & contains the power supply & control cables for the sensors or actuators. The distributors are available with 4.6 or 8 slots. Max.16 sensors or actuators can be connected to a double-occupied box. ...