Full drive unit with 3 Navy-compact-drive-engines, shielded & wired, one circuit & central module (SZM), which enables following switching: Either the central engine or both the outer engines are controlled via respective drive-regulator, or only the outer engines are separated, stopped or re-regulated respectively (when the central engine is switched-off). Central 6 V- u. 12 V-current-supply. ...

This functional unit makes it possible to set off the dinghy by remote control & again retrieve it. The mirror like wire draw mechanism

Includes:: an automatic switch off & can be stopped in any position. On reaching the lower hook position, an indicator lamp lights up automatically in the pole. The opening & closing of the boot lid takes place independent of cable pull through a separate servo. With the front hook the daughter boat latches in the ring of the cable pull. Contents: Gear motor, shielded & wired, Limit switches-unit, module for a gear motor, pulleys, return pulleys & more machine parts, connecting parts for the rear flappe.

...

This surface-mounted programmable 4-channel radio switch means that you can switch up to four different consumers, e.g. garage doors, pumps, lamps etc., independently of each other. Consumers are actuated via a transmitter of your FS20 radio switch system or via your FHZ 1000 Radio Home Centre. The surface-mounted radio switch has four potential-free DTCs that can be integrated into the existing wiring & that can be operated directly on the device, if desired. You can choose whether your equipment is to be switched on for periods of between 1 s & 4.25 h or permanently. The weather-proof housing makes this switch suitable for outdoor use as well. ...

The false ceiling radio can be placed anywhere due to its compact casing. The radio can be activated via the special remote control provided in the set or via any other FS20 remote control, FS20 time switch or a FS20 motion detector. The adjustable sensitivity of the scan with 8 memory slots helps to program the desired station. Only 230 V / AC & the desired speaker is required for start up If desired, even Status LEDs & an additional audio device (For example: MP3 Player) can be attached. ...

The dimmer is powered via an economical external DC source, which can be adapted to the power required. It can be operated via FS20 remote control or via an external button, & emergency control
directly from the device is also possible. As well as the manual dimming function, three separately programmable automatic timers are available: A
switch-off timer, a slow-on timer (fade in) & a slow-off timer (fade out). The timers can be programmed for between 1 s & 4.5 h.

...

This dimmer is designed for use in the FS20 DIN rail system. The dimmer can be operated directly on the device as well as via any transmitter of the FS20 radio switch system. Incl. built-in timer (duty cycle programmable between 1 s & 4.5 h). Power as well as the switch signal lead is supplied via the FS20 SEH power adapter. Radio reception via the FS20 EAM radio receiver in combination with the power pack. ...

The radio plug-in dimmer has the same construction as the radio switching socket FS20ST Part No. 62 30 04-62. However, the connected lamps can not only be switched, but instead their brightness can also be controlled. It can be used with conventional bulbs (resistive loads) & conventional halogen transformers (inductive loads). The integrated timer allows switching on briefly for 1 s up to 4.5 h or dimming up & down softly during the timer period. ...