Liquitex Flexible Modeling Paste is a matte, opaque preparation of marble dust & polymer emulsion.   100% acrylic polymer & marble dust putty builds flexible form & structure. It dries more slowly than other modelling pastes to a hard, yet flexible surface. Dries to a very hard yet flexible opaque white matte finish, on supports that may be subject to some movement. Can be used on its own, mixed with color or painted once dry. Dries more slowly than other modeling pastes. Gives minimal shrinkage. Can be overpainted with acrylics, oils, watercolors, graphite or dry pastels. Maintains paint adhesion, durability & archival quality. Recommended for use on supports with occasional flexing. How to use Fully intermixable with all Liquitex products. Apply with knife or tool. Tint with acrylic color to make a colored paste. Can be handled like clay
- for best results remove the lid to let some of the water slowly evaporate until you get the texture you want. For sculptural texture, build up in thin layers (each no more than a quarter of an inch thick), allowing each to dry. Dry slowly by covering loosely with plastic wrap to avoid shrinkage cracks. If cracks appear, allow to dry & fill in with another thin layer of paste. Overpaint once dry with acrylics or most other media. To use as a slightly flexible ground
- apply a thin layer to rigid surface with knife/trowel/roller, leave to dry, sand smooth & repeat if needed. To make an absorbent ground, mix 1 part Modeling Paste to 3 parts Liquitex Gesso, apply with a trowel/roller, leave to dry, sand smooth & repeat if needed. For paper-mache, soak paper in a 50/50 mix of Modeling Paste & Gloss/ Matte Gel/ Gloss Heavy Gel. Can be mixed with acrylic-compatible powdered pigments or aggregates -Do not use with any non-acrylic compatible media. Drying too quickly will cause cosmetic (not structural) cracks. Use with  Liquitex Heavy Body Acrylic and  Liquitex Soft Body Acrylic colours.

...

Liquitex Flow Aid breaks water tension to improve flow, absorbency & blending of any water based paints, ink or dye to minimize brush strokes. Great for staining effects on raw canvas. Breaks water tension to improve flow & lower viscosity Gives a smooth finish with less brush strokes due to reduced surface friction Increases transparency & makes color more absorbent & blendable   How to use   First dilute your concentrated Flow Aid with water - 1 part Flow Aid to 20 parts water
- distilled water will give the best results. Use 1 part Flow Aid to 10 parts water if you want a more concentrated effect Add up to 25% of diluted Flow Aid to your color/medium & stir slowly to avoid foaming. If it does foam, leave it to sit while the foam disappears If applying to an absorbent surface, your color/medium will sink in like a stain or dye; if using on a non-absorbent surface your color/medium will be more fluid & take longer to dry Fully intermixable with all Liquitex products Do not use Flow Aid undiluted as it results in poor acrylic adhesion, cracking, tackiness & water sensitivity As this is an additive – with no acrylic binders
- do not add more than 25% to your color/medium & do not mix with other additives. This can cause excessive shrinkage, cracking & the acrylic film to break down Do not shake or stir too vigorously as foam will form Dont use for marbling as it breaks the surface tension of the water Do not use with any non-acrylic media  

...

Liquitex Fluid Airbrush Medium is a pre-filtered, read-to-use medium that easily thins any acrylic, water colour, or gouache to the right consistency for spray application. An excellent choice for colour washes & water colour techniques when used with acrylic colours. Mixes well with other mediums to adjust the body & handling properties. Maintains integrity of acrylic even at high dilutions, & decreases airbrush clogging & paint build-up. How to use   Fully intermixable with all Liquitex products. Start by using in a 1:1 ratio with Soft Body Acrylic or Acrylic Ink, adjusting levels according to color chosen as each varies due to pigment size & and concentration. Airbrush nozzle size & spraying pressure will determine your ratio, so experiment to get the optimum mix. Stir gently until the mixture is fully blended
- if bubbles appear, leave it to sit while the bubbles rise & disappear. If using with Heavy Body, strain once mixed to remove any particles of undissolved color. Clean out immediately after use before acrylic has a chance to dry -Do not allow paint to dry in the airbrush
- always wash it through with warm soapy water, a water/ammonia mixture, airbrush cleaner or alcohol. Do not shake. Do not use with any non-acrylic media.   Use with Liquitex  Acrylic Ink, Liquitex Heavy Body and  Liquitex Soft Body Acrylic colours.  

...

Liquitex Glazing Medium is used when maximum transparency is required to add luminosity & depth to your paintings.  This fluid medium can be used to create brilliant glazes when mixed with transparent colour. Glazing Medium dries quickly for rapid layering & tends to minimize or eliminate brush strokes. Mix with Slow-Dri Fluid Retarder to extend working time. Increases color depth, transparency & surface gloss. Dries quickly for rapid layering. Lowers viscosity & minimizes brush strokes. Extends your color further without affecting acrylic stability. Maintains paint adhesion, durability & archival quality.   How to use   Fully intermixable with all Liquitex products. Use with transparent & semi-transparent colors for rich glazed effects. Can be thinned by diluting with up to 25% water
- distilled water will give best results. Mix as much as you like into acrylic color to create the viscosity & transparency you want
- the more you add, the thinner & more transparent your color will become. Stir gently to avoid creating foam
- if bubbles appear, leave it to sit while the bubbles rise & disappear. Color will temporarily lighten & then return to its original level when dry. Let each layer dry completely before applying the next. Apply to dry, painted areas to change coloration without losing established detail. Do not shake or vigorously over-brush as this can result in a foggy, hazy look when dry. Do not use with any non-acrylic media.   Use with Liquitex Heavy Body Acrylic & Liquitex Soft Body Acrylic colours.


...

Liquitex Glazing Medium is used when maximum transparency is required to add luminosity & depth to your paintings.  This fluid medium can be used to create brilliant glazes when mixed with transparent colour. Glazing Medium dries quickly for rapid layering & tends to minimize or eliminate brush strokes. Mix with Slow-Dri Fluid Retarder to extend working time. Increases color depth, transparency & surface gloss. Dries quickly for rapid layering. Lowers viscosity & minimizes brush strokes. Extends your color further without affecting acrylic stability. Maintains paint adhesion, durability & archival quality.   How to use   Fully intermixable with all Liquitex products. Use with transparent & semi-transparent colors for rich glazed effects. Can be thinned by diluting with up to 25% water
- distilled water will give best results. Mix as much as you like into acrylic color to create the viscosity & transparency you want
- the more you add, the thinner & more transparent your color will become. Stir gently to avoid creating foam
- if bubbles appear, leave it to sit while the bubbles rise & disappear. Color will temporarily lighten & then return to its original level when dry. Let each layer dry completely before applying the next. Apply to dry, painted areas to change coloration without losing established detail. Do not shake or vigorously over-brush as this can result in a foggy, hazy look when dry. Do not use with any non-acrylic media.   Use with Liquitex Heavy Body Acrylic & Liquitex Soft Body Acrylic colours.


...

Liquitex Gloss Gel is excellent for retaining brush marks while slowing the drying time & adding body to the paint. Maintains paint adhesion, durability & archival quality Slows drying time & enhances appearance of brush marks Increases viscosity of soft body paints, giving a thicker consistency Gives heavy body paint an oil-like color brilliance Extends your color further without affecting acrylic stability Increases surface gloss, color depth & transparency   How to use   Fully intermixable with all Liquitex products Mix with Matte Gel to create a custom satin gel Can be thined by diluting with up to 25% water
- distilled water will give best results Mix as much as you like into acrylic color to create the viscosity & transparency you want
- the more you add, the more transparent your color will become Mix into  Liquitex Heavy Body Acrylic to extend volume & maintain viscosity Mix into  Liquitex Soft Body Acrylic or Acrylic Ink to extend volume & thicken This is semi-opaque when wet, transparent when dry
- when used very thickly it may dry semi-opaque Apply with a brush as a collaging glue & fixative. Do not vigorously over-brush as this can result in a foggy, hazy look when dry Do not use with any non-acrylic compatible media Use with  Liquitex Heavy Body Acrylic and  Liquitex Soft Body Acrylic colours.


...

Liquitex Gloss Gel is excellent for retaining brush marks while slowing the drying time & adding body to the paint. Maintains paint adhesion, durability & archival quality Slows drying time & enhances appearance of brush marks Increases viscosity of soft body paints, giving a thicker consistency Gives heavy body paint an oil-like color brilliance Extends your color further without affecting acrylic stability Increases surface gloss, color depth & transparency   How to use   Fully intermixable with all Liquitex products Mix with Matte Gel to create a custom satin gel Can be thined by diluting with up to 25% water
- distilled water will give best results Mix as much as you like into acrylic color to create the viscosity & transparency you want
- the more you add, the more transparent your color will become Mix into  Liquitex Heavy Body Acrylic to extend volume & maintain viscosity Mix into  Liquitex Soft Body Acrylic or Acrylic Ink to extend volume & thicken This is semi-opaque when wet, transparent when dry
- when used very thickly it may dry semi-opaque Apply with a brush as a collaging glue & fixative. Do not vigorously over-brush as this can result in a foggy, hazy look when dry Do not use with any non-acrylic compatible media Use with  Liquitex Heavy Body Acrylic and  Liquitex Soft Body Acrylic colours.


...

Liquitex Gloss Heavy Gel is a very thick gel medium that extends working time & increases brilliance & transparency.   Increases viscosity to create an oil paint-like consistency that holds knife & brush marks Increases surface gloss, color depth & transparency Extends your color further without affecting acrylic stability Slows drying time Maintains paint adhesion, durability & archival quality   How to use   Fully intermixable with all Liquitex products Mix with Matte Gel to create a custom satin heavy body gel Can be thinned by diluting with up to 25% water
- distilled water will give best results Mix as much as you like into acrylic color to increase viscosity & transparency
- the more you add, the more transparent your color will become This is semi-opaque when wet, transparent when dry
- when used very thickly it may dry semi-opaque Apply with a brush as a collaging glue & fixative How not to use it Do not vigorously over-brush as this can result in a foggy, hazy look when dry Do not use with any non-acrylic compatible media Use with  Liquitex Heavy Body Acrylic and  Liquitex Soft Body Acrylic colours.


...

Liquitex Gloss Medium improves flow & adhesion of paint film when mixed directly with acrylic paint. Liquitex Gloss Medium is perfect for adding a gloss finish to acrylic paints if you dont want the typical matt finish acrylic paints give. Increases surface gloss, color depth & transparency. Lowers viscosity of heavier body paints, giving increased flow. Extends your color further without affecting acrylic stability. Maintains paint adhesion, durability & archival quality. Use as a non-removable varnish to protect paintings & establish a gloss surface sheen. Ideal to use as a glue when collaging with lightweight materials. Transfers printed images.   How to use   Fully intermixable with all Liquitex products. Mix with Matte Medium to create a custom satin fluid medium. Can be thinned by diluting with up to 25% water
- distilled water will give best results. Mix as much as you like into acrylic color to create the viscosity & transparency you want
- the more you add, the thinner & more transparent your color will become. Stir gently to avoid creating foam
- if bubbles appear, leave it to sit while the bubbles rise & disappear. This is semi-opaque when wet, transparent when dry. To fix pastel, graphite or chalk, mix 1 part medium to 1 part distilled water & apply with an atomizer or airbrush. Apply with a brush/sponge as a lightweight collaging glue Do not shake or vigorously over-brush as this can result in a foggy, hazy look when dry. Do not use with any non-acrylic media.   Use with Liquitex Heavy Body Acrylic & Liquitex Soft Body Acrylic colours.


...

Liquitex Gloss Medium improves flow & adhesion of paint film when mixed directly with acrylic paint. Liquitex Gloss Medium is perfect for adding a gloss finish to acrylic paints if you dont want the typical matt finish acrylic paints give. Increases surface gloss, color depth & transparency. Lowers viscosity of heavier body paints, giving increased flow. Extends your color further without affecting acrylic stability. Maintains paint adhesion, durability & archival quality. Use as a non-removable varnish to protect paintings & establish a gloss surface sheen. Ideal to use as a glue when collaging with lightweight materials. Transfers printed images.   How to use   Fully intermixable with all Liquitex products. Mix with Matte Medium to create a custom satin fluid medium. Can be thinned by diluting with up to 25% water
- distilled water will give best results. Mix as much as you like into acrylic color to create the viscosity & transparency you want
- the more you add, the thinner & more transparent your color will become. Stir gently to avoid creating foam
- if bubbles appear, leave it to sit while the bubbles rise & disappear. This is semi-opaque when wet, transparent when dry. To fix pastel, graphite or chalk, mix 1 part medium to 1 part distilled water & apply with an atomizer or airbrush. Apply with a brush/sponge as a lightweight collaging glue Do not shake or vigorously over-brush as this can result in a foggy, hazy look when dry. Do not use with any non-acrylic media.   Use with Liquitex Heavy Body Acrylic & Liquitex Soft Body Acrylic colours.


...