The ZUIKO DIGITAL ED 9-18mm (35mm equivalent focal length: 18-36mm) is a super-wide-angle lens offering a 100°
- 62° angle of view.
...

Zacuto Zwiss Plate V2 Z-ZWP2 The Zacuto Zwiss Plate V2 has multiple mounting options for various recorders & specific hole patterns for battery plates. The Zwiss Plate V2 has all the holes labeled to easily identify the correct hole pattern for various devices. It means that you can mount articulating arms, rods, battery plates, converter boxes & various other camera accessories to your support system. Unlike other cheese plates, the Zwiss Plate V2 has two sets of industry standard 15mm rod holes spaced 60mm apart. This allows vertical mounting onto standard 15mm rods. The red levers enable you to securely mount the plate onto your rods. The Zwiss Plate V2 is also designed to work with our Wireless Plate Pro for mounting multiple wireless receivers or other small devices. You can use the Zwiss Plate V2 to mount a variety of accessories or V-mount or 3 Stud battery plates & batteries. The battery plate & battery mounted on the Zwiss Plate V2 also acts as a counterbalance. Our Zamerican quick release arms mount directly into the 15mm holes of the plate & are perfect for mounting lights, monitors & audio devices. With plenty of ¼” 20 & 3/8” 16 holes on the Zwiss Plate V2, your mounting options are limitless.  Please note below when ordering if you are using this with the QRC-CA940 for the C300 or C500 or the Codex Onboard S 4K Recorder as you will need extra screws.   ...

Recreates the light of sunset at any hour of the day. The upper part more tinted to embellish the sky, & lighter in the lower part to harmoniously complete the sunset effect
- density 2 for a stronger effect. Aimed at the professional & enthusiast photographer, the Z-PRO series total over 80 different filters including coloured, centre spots, pastel/ diffusers to graduated & neutral density filters. Z-PRO filters are available in two different sizes. The plain filters, i.e. coloured, centre spots & pastel/diffusers measure 100x 100mm in size & the graduated filters 100x 150mm. All Z-PRO filters are manufactured from high quality CR39 organic glass & fit the Cokin Z-PRO holder system.
...

Veho Z-8 On-Ear Wired Headphones with Anti-Tangle Cable Introducing the new 360 degree Z8 designer headphones from Veho. The headphones come with built-in noise isolating technology, soft leather ear pads & a contemporary aluminium look, designed to stand out from the others. The Z8 headphones are fully compatible with all devices such as MP3 players, iPhone, iPad, laptops or any device which uses a standard 3.5mm output jack. Alternatively, connect it up to the SAEM S4 to turn them into wireless Bluetooth headphones. The 40mm noise isolating technology will decrease the surrounding noise pollution to allow you to enjoy & listen to your music the way you want. The super soft leather ear pads are designed for your comfort & the adjustable headband makes these headphones ideal for any head size. The foldable sleek & stylish design comes with a detachable 130cm flex flat ‘anti’ tangle cable that can be easily stored in the protective carry case, perfect for travelling or commuting. ...

Zacuto Z-DRV Follow Focus The Zacuto Z-Drive is a unique, universal direct drive follow focus, designed with single operator shoulder mounted rigs in mind. Because it has a universal joint & no internal gears it can’t develop play. It attaches to a single 15mm diameter rod & curves away from the operator at a 60 degree angle creating space & distance from the lens for comfortable use when the camera is on your shoulder. This is the perfect follow focus for a Recoil kit set up (where the camera is directly over your shoulder) as it brings focus control further forward as well as down for comfortable operation. The Z-Drive can operate in four modes & is extremely adjustable for all size lenses. It can operate on the camera assistant or operators side of the rig positioned forward toward the lens or backward towards the tripod/dolly etc.. This makes for easy operation with a standard follow focus whip used on a tripod. The Z-Drive slides onto a single 15mm diameter rod (on the left or right of your camera) & tightens in place next to your lens with a Zacuto quick-release ratcheting red lever. It comes with a fixed 1 ¾” diameter. 8 pitch gear to connect to your lens. If your lenses are not pitched to. 8 or are not pitched at all (most DSLR & basic video camera lenses are not) you can add our Zipgear Universal to your lens so the teeth match our gear correctly for smooth rotation. The Zip Gears can be cut to fit the circumference of your lens & tightened with an Allen key. These Zip Gear straps are pitched to. 8 & are 13.5” long. The Z-Drive has a slender marking disc to create distance marks for repeatable focus pulls & a standard whip port. We recommend using the Z-Drive with our Tornado grip when working handheld. The Tornado attaches to the Z-Drive whip port & works in tandem with the Z-Drive to create a unique mechanical follow focus handgrip perfect for single operator shoulder mounted work. PLEASE NOTE: The Z-Drive is not compatible with matteboxes when working shoulder mounted. ...

Zacuto Z-Finder EVF Pro The Zacuto Electronic Viewfinder (EVF) is a 3.2” high resolution monitor designed to be used in conjunction with any Z-Finder model. The EVF is compatible with all cameras that have an HDMI output, including most DSLRs, the Panasonic AF-100, Sony F3, Canon C100/300/500, RED ONE, RED Scarlet, RED Epic & many, many more. The EVF is compatible with the Blackmagic Camera (and other SDI only cameras) with use of a converter like the Blackmagic HD-SDI to HDMI mini converter. The EVF means that you can operate with your camera "in-line" with your rod system & an offset viewfinder in front of your eye. We believe this traditional film camera & ENG camera style of shooting is the most stable & comfortable. Now we can work this way with any camera. The EVF enhances the stability of any set up, gives you better resolution & focus ability, means that you can get your eye where it most comfortably needs to be, enables low mode shooting, & shortens a shoulder mounted camera package. With an external viewfinder, you’re no longer trapped behind the back of your camera. You can have your camera on a dolly or crane or in a car or anywhere & have the EVF in your h&. The Z-Finder EVF Pro is a complete EVF with diopter. It

Includes:: the EVF Flip model & an optical viewfinder which can snap onto the frame of the monitor & also flip up 180 degrees. The optical viewfinder contains high quality 2.5x optics with anti-fog shields & a diopter. It also

Includes:: three extender frames. The Z-Finder Extender Frames allow you to further adjust the focal point of the Z-Finder by semi-permanently stacking the frames via a snap fit onto the skirt of the Z-Finder until the LCD screen is in focus for you. You can then dial in closer with the diopter wheel.



...

The Z-Finder Jr. is one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification, a 40mm diameter Zacuto optical designed lens, an eyecup preventing extraneous light leakage, & a field of view perfectly matched to 3” LCD screens. The Z-Finder Jr. does not have a diopter instead it uses Z-Finder Extender Frames to adjust the focal point. The Z-Finder Jr's focal point is -2.75 & up (unlimited with extender frames). The Z-Finder Extender Frames attach to the skirt of the Z-Finder Jr. & allow you to semi-permanently stack the frames until the LCD screen is in focus for you. The Z-Finder Jr. uses a mounting bracket that must be sandwiched in between a tripod plate & the camera. The bracket mounts to the ¼ 20” screw on your tripod plate & the actual Jr. is held in place with pressure from the fork of the bracket it sits in. You also have the option to mount the Z-Finder Jr. using the Z-Finder Mounting Frame (snap fit adhesive mounting frame) which is also included. Zacuto also added a lanyard hook on the outside of the Z-Finder Jr. so you can attach a Zacuto lanyard to it. This allows for the user to quickly take the Z-finder Jr. off & on when needed. The Z-Finder Jr. Mounting Bracket only works with small bodied DSLR cameras such as the Canon 5d/7d. 2 Extender Frames Z-Finder JR. Mounting Bracket Lanyard & Lanyard Hook Lens Cap Z-Finder Snap Fit Mounting Frame ...

Zacuto Z-Finder Mounting Frame for DSLRs with Battery Grips is required when mounting a Z-Finder to the 3" LCD screens of small-body cameras--from the Canon 5D Mark II to the Nikon D90--equipped with battery grips. This longer frame attaches to a required Gorilla Plate using two thumb screws; then, with the frame's rubber edges pressing snugly against the LCD screen, the Z-Finder can snap quickly into the frame & be just as easily removed. Works with Z-Finder Pro 2.5x, 3x, & Jr. (Gorilla Plate not included with Z-Finder Jr.--must be purchased separately) made from aircraft aluminum Non-stick rubber coating seals off light & prevents scratching of camera ...

The Z-Finder Pro 2.5x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification (a 3x magnification is available), a 40mm diameter Zacuto optical designed Anti-Fog lens, an eyecup preventing extraneous light leakage, a diopter & a field of view perfectly matched to 3” LCD screens. The diopter means that you can dial in the focus to match your eye perfectly. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 2.5x has a diopter range of -4.75 & up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro & extends the Z-Finder glass further way from the LCD screen for people who are farsighted. The Z-Finder Pro uses our Gorilla Baseplate & Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20” screw & the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method means that you can quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws & pulling up on the metal mounting frame to release it. With the Z-Finder Pro, you are also a step closer to using one of our Gorilla Support Rigs, as they use the same baseplate as the base. 3 Extender Frames Gorilla Plate with DSLR Short Body Frame (Canon 5D/7D type cameras) Lens Cap & Protective Boot Lanyard Hook & Lanyard 2.5x Magnification Anti-Fog Coating Lens ...

The Z-Finder Pro 3x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available), a 40mm diameter Zacuto optical designed Anti-Fog lens, an eyecup preventing extraneous light leakage, a diopter & a field of view perfectly matched to 3” LCD screens. The diopter means that you can dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 & up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro & extends the Z-Finder glass further way from the LCD screen for people who are farsighted. The Z-Finder Pro uses our Gorilla Baseplate & Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20” screw & the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method means that you can quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws & pulling up on the metal mounting frame to release it. With the Z-Finder Pro, you are also a step closer to using one of our Gorilla Support Rigs, as they use the same baseplate as the base. 3 Extender Frames Gorilla Plate with DSLR Short Body Frame (Canon 5D/7D type cameras) Lens Cap & Protective Boot Lanyard Hook & Lanyard 3x Anti-Fog Coating Lens ...