The Wireless Flash RF60 is a portable flash that has a built-in wireless transmitter + receiver – THREE things combine into one. With a transceiver built-in, the RF60 can receive wireless triggering signal from a flash trigger & fire accordingly without having to attach an external receiver to the flash. When using with Cactus V6, both power output & zoom level of the RF60 can be adjusted remotely by Cactus V6. Also because of the built-in transceiver, the RF60 itself, without anything attach to it, can function as a commander to control other RF60s. If you place an RF60 on a camera hot shoe, you can wirelessly control other off-camera RF60s without using ANY flash trigger at all. Built-in wireless commander & receiver: The Cactus RF60 is a 2.4 G Hz radio-based wireless portable flash with a built-in transceiver that runs on 16 channels. It operates in three modes, Local for on-camera operation, Master & Slave modes for off-camera. To act as a commander, set an RF60 to Master & it can trigger an unlimited number of RF60 set in Slave mode. The effective distance between the Master RF60 & Slave RF60 is up to 100m (328 feet). Remote control of power & zoom levels: The power levels of the RF60 set in Slave mode can be adjusted from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm. With remote power & zoom control, you can place the RF6 units in hard-to-reach places & control its power & zoom level wirelessly. Group control of up to four groups with configurable Group Alias: In a typical lighting setup, the ability to adjust, activate & deactivate groups of lights is vital in creating the desired lighting effect. The RF60 can be configured into four distinct groups. Power output can be adjusted in individual group or in all groups at the same time for fast adjustments. To streamline the shooting experience, user can rename each group to: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK & FRONT instead of remembering the placement of flash groups A, B, C & D. Optical Slave with delay feature: The RF60 has a built-in optical sensor. The optical sensor captures pre-flash signals that are being emitted earlier than the flash sync. By setting the pre-flash optical trigger & the delay timer, you can set the exact time for the flash to start firing. This allows the RF60 to do not only first-curtain & second-curtain sync (also referred as front & rear curtain), but can fire at any given point of the image. High power up to Guide Number of 56 meters: The RF60 has powerful guild number GN56. The Fresnel lens was specifically designed to give out the best possible light. Compatible with Cactus V6 Wireless Flash Transceiver: Flash power output on RF60 Slave units can be controlled by an RF60 Master as well as Cactus V6 Flash Transceiver. Cactus V5 also supports basic flash triggering on the RF60 but does not support power output control on the RF60. Multi-flash feature: In Multi mode, a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame. This feature is available in all three flash modes so its users can create the desired effects with both on & off camera flash. HSS Sympathy mode: The HSS Sympathy mode of the RF60 is designed to support flash photography at shutter speeds beyond a camera’s maximum sync speed. With the help of a TTL flash mounted on camera, RF60 fire flashes with an extended duration in order to produce even frame illumination at shutter speeds as high as 1/8000 second. The RF60 is meant for use in a multiple flashes setup & designed with the needs from the need of professional photographers in mind. Whether it’s a wedding or commercial shoot, timing is crucial. RF60 users will not only find adjustments quick & easy, the LCD also displays necessary information photographer needs to know. All in all, it offers an intuitive flash photography experience. So you, as the photographer, do not need to fiddle with the gear but instead enjoy the shooting experience. ...

The Cactus V6 is the World’s First wireless flash trigger that works ON ANY CAMERA (*with a standard hot shoe or PC Sync port) to control power output, wirelessly, of Canon, Nikon & Pentax’s system flashes ALL AT THE SAME TIME. Remote Power Control of Canon, Nikon & Pentax flashes Each flash model has its individual power level characteristics. We have profiled more than 30 popular flash models across a wide range of brands so that the V6 can precisely control their output levels. With this unique feature, photographers can remotely control the flash power of various flash models, even of different brands. Currently, more than 30 popular flash models from Canon, Nikon, Pentax, Metz, Nissin, etc. have been profiled & pre-installed on the V6. By selecting the pre-installed flash model on the Cactus V6 the photographer can remotely control the flash power output of the selected flash model wirelessly through the Cactus V6. If a flash model is not listed, the V6 may even learn its flash profile & then be able to control the power output of the flash. (See note on compatibility) Remote Power & Zoom Control of Cactus RF60 Wireless Flash The V6 can directly control a Cactus RF60 set to Slave mode using RF60’s built-in radio transceiver. Besides controlling power remotely in single & multiple groups, the V6 can also adjust the zoom level of the RF60 easily by pressing the adjustment wheel & swap control between power & zoom. Quick Power Adjustments Control is extremely easy & swift with the use of a selection dial & a combination of group buttons. V6 can control multi-group power output in just one quick slide which is faster than any manual system available in market. To adjust an individual group, simply press & hold the group button & scroll the adjustment dial at the same time & changes will be instantly made on the V6 RX unit. Absolute Power Control V6 can benchmark the power output of flash models with different GN. In Absolute Power mode, EV numbers can be used to specify an absolute light intensity, independent of the maximum power output of a flash model. TTL Pass-through The V6 transceiver comes with a multi-system shoe that supports TTL pass through. With TTL pass-through, the TTL flashes behave as they would when directly connected to the camera hot shoe. ...

Cactus Wireless Flash Transceiver V6II The Cactus V6 II is the World’s First wireless flash trigger that supports cross-brand high-speed sync (HSS) & can control power output & zoom angle of Canon, Fujifilm, Nikon, Olympus, Panasonic & Pentax system flashes all at the same time. Two High-Speed Sync Modes: Normal HSS: Supports shutter speed up to 1/8000s. Power Sync: Boosts flash contribution above camera’s x-sync speed, perfect for extreme conditions where Normal HSS is not powerful enough. Cactus also extends HSS capabilities to Fujifilm cameras despite them not yet supporting high-speed sync at the time of writing. AF-Assist: Both the V6 II & IIs now has an automatic LED AF-assist light that makes auto-focusing in dark environments possible – even in pitched-black! Besides the camera-mounted V6 II/IIs, off-camera units will also activate the AF-assist light, which helps focusing even when camera is far from the subject. Highly Intelligent: V6 II can now auto-detect the on-camera portable flashes at device start-up by selecting the system the flash belongs to & assigning an Auto flash profile. Moreover, it now works with previously unsupported digital-only TTL flash models on the V6 & expands its compatibility. Similarly, the V6 II will auto-detect the camera & selects the system accordingly.4 This simple plug-&-play makes the setting up extremely quick & easy that both amateurs & professionals appreciate. Flash Profile Customization: Users may still manually choose from more than 60 popular flash models from Canon, Nikon, Pentax, Olympus, Panasonic, Metz, Nissin, etc. should they wish to. & for those who demands the utmost accurate power outputs they may adjust each power level using the Cactus Profile Editor, a computer-installed software that allows the saving of up to 10 personalized flash profiles. Remote Power & Zoom Control: Besides remote power control, remote zoom control is now available to all compatible TTL flashes, which was only available on Cactus RF60 series Wireless Flash before. This will give photographers much quicker controls by swapping controls of power & zoom settings directly on the V6 II. Multi-master: The V6 II now allows multiple photographers to trigger off-camera flashes at the same time. Not only is this great for wedding & events, it is also perfect for running photography workshops. ...

Cactus Wireless Flash Transceiver V6IIS The Cactus V6 IIs is a wireless flash trigger dedicated for Sony camera & flash which supports HSS, & can remote control power output & zoom angle of Sony system flashes. It can also triggers the Cactus V6 II, which makes the V6 IIs the World’s First Sony-supported wireless flash trigger that supports cross-brand high-speed sync (HSS) & control power output & zoom angle of Canon, Fujifilm, Nikon, Olympus, Panasonic & Pentax system flashes all at the same time. Two High-Speed Sync Modes: Normal HSS: Supports shutter speed up to 1/8000s. Power Sync: Boosts flash contribution above camera’s x-sync speed, perfect for extreme conditions where Normal HSS is not powerful enough. AF-Assist: The Cactus V6 IIs has an automatic LED AF-assist light that makes auto-focusing in dark environments possible – even in pitched-black!3 Besides the camera-mounted V6 IIs, off-camera units will also activate the AF-assist light, which helps focusing even when camera is far from the subject. Dedicated For Sony Devices: V6 IIs is specially designed for Sony camera & flashes with the MI (Multi-Interface) hot shoe. Older models with the Minolta/ Sony i ISO shoe are also supported with a hot shoe adapter. So it will be a simple plug-&-play for Sony users & makes the setting up extremely quick & easy that both amateurs & professionals appreciate. Flash Profile Customization: Users may manually choose from popular Sony flash models on the V6 IIs should they wish to. & for those who demands the utmost accurate power outputs they may adjust each power level using the Cactus Profile Editor, a computer-installed software that allows the saving of up to 10 personalized flash profiles. Remote Power & Zoom Control: Besides remote power control, remote zoom control is now available to all compatible TTL flashes, which was only available on Cactus RF60 series Wireless Flash before. This will give photographers much quicker controls by swapping controls of power & zoom settings directly on the V6 IIs. Multi-Master: The V6 IIs allows multiple photographers to trigger off-camera flashes at the same time. Not only is this great for wedding & events, it is also perfect for running photography workshops. ...

Wacom Wireless Keyboard for Cintiq Companion The perfect addition to a Cintiq Companion. • Bluetooth® keyboard for Microsoft® Windows® • Long-lasting Li-Ion rechargeable battery • Lightweight & compact ...

This wireless receiver works with the Genesis GF200 or GF400 Portable Flash System to sync flashes seamlessly. It is possible to program & group up to 16 channels & sync at speeds of up to 1/250 second. The wireless receiver features simplified controls & works up to 164 ft. away from the source. ...

The Genesis Wireless Remote features a large LCD display & enables you to control your Genesis AS250 & AS500 from a distance up to 164'. This unit is powered by 3 AAA Batteries (sold separately). ...

DJI Wireless Thumb Controller for Ronin-M Simple to setup & use, the DJI Ronin Wireless Thumb Controller makes controlling your Ronin-M easier & more intuitive, even with only a single operator. Capture shots that are difficult or impossible now, & start using your gimbal to its full potential.

Features: Complete Control by Thumb A custom-made pressure sensitive stick means that you can quickly change the settings, speed, & direction of your gimbal, all at the flick of your thumb. Control where your camera is facing & access advanced settings including calibration, channel settings, & preset profiles. Making changes is even faster than when using the Ronin remote controller or mobile app, & can be done during any of your shots. Fast Setup & Mounting Simply link the Thumb Controller to your gimbal, & you are ready to go. The Thumb Controller clamps easily to the handle bars or can be placed anywhere you like, no tools required. Clear OLED Screen View your current status & click through menu options by using the bright, clear OLED screen. This compact yet powerful display makes accessing the basic functions of your Ronin-M easy. Long Battery Life & Range The Thumb Controller’s built-in rechargeable battery gives you up to 18 hours of power per charge, enabling you to use it all day without worry. If you prefer to control your Ronin-M from a distance, the nearly 200 foot (60 meter) transmission range makes capturing unique shots easy. Dual Controller Compatibility Use the Thumb Controller in tandem with the Ronin-M’s included remote controller. You can set the priority control source by easily designating the primary device. Future Upgrades A Micro-USB port on the Thumb Controller means that you can download & apply future software updates & recharge the integrated battery.

...

Hahnel Worldwide Duo Charger

Features: Two USB (Universal Serial Bus) ports: USB (Universal Serial Bus)-C &

...

Fujifilm WP-126S Battery Rechargeable battery. ...