The California Sunbounce system consists of a collapsible aluminium frame that can be easily assembled & combined with different reflecting, light-reducing, or light-absorbing screens to take full advantage of any kind of light, hard or soft, natural or artificial. This California Sunbounce Mini Sun-Bounce Translucent 2/3 Screen (3x 4') is a translucent screen that diffuses & softens the light, while decreasing the light transmitted through it by 2/3 f-stop. Frame is not included. ...

The Lastolite Tri Grip reflectors feature a moulded handle complete with securing strap, allowing even more accurate positioning of the reflector with one h&, which means that light can be directed to all those awkward areas e.g. under the chin & eyes, without the need for stands or supports. The securing straps also allow you to support the reflector without actually gripping the handle, reducing the pressure on your wrist & fingers when held for prolonged periods. This is the mini (45cm) Sunlite/ Soft Silver version. It collapses down to just 20cm & is supplied with its own carry bag. The Tri Grip is available in 3 sizes Mini (45cm), Standard (75cm) & Large (120cm) & 4 colour variations plus 2 diffusers. ...

The Minibee-120 PL is a professional, multi-featured, on-board backpack, designed to provide the best carrying, storage & working solutions for a DSLR (without grip & booster) + up to 70-200 f 2.8 lens attached + 6-8 lenses + flash + many other accessories, OR a compact camcorder, chargers & accessories. It will also accommodate most 13'' laptops, an ipad or netbook. The bag can be opened fully or sectioned into top & bottom access, use the included Aeriform Dividers & Cocoon Pouches to custom fit your gear needs & preferred working mode. A variety of external pockets will store items you need rapid access to, such as wallet, phone, water bottle etc.   Manfrotto Bag Chooser: https://www.manfrotto.co.uk/shop-by/collections/bags/csc-bags-chooser   ...

Removeable & reversible screen for the Minibounce Frame.  Why black?  Well for subtractive lighting.  Taking the light away from a situation & then making it your own.  Taking the light away is crucial as the starting point. Sunbounce panels are the perfect travelling walls for getting this done.  Normally photographers would be using foamcore, which as anyone can tell you does not travel well.  Sunbounce panels with a Black screen transport easily, are more rigid & can be used over & over again.  Better for the environment. Black can also be used in any situation where  you are trying to cut the light off from falling where you do not want it.  Be it on talent or the top of your head.  The key light is a window with a 2/3 diffusion panel in front of it.  On the other side of the Black / White screen is a white fabric which is unique & extremely funtional.  This white is Ultrabounce which is something which has come from the movie industry.  It is a white surface which when a light is bounced off, be it a bit of sunlight or a 5K movie light, the reflective quality is such that there is no hot spot.  The fall off is subtle & gradual, which is very pleasing. ...

The California Sunbounce Minibounce Cloth
- Zebra/ White is a removable & reversible screen for the Minibounce Frame.  Our most
...

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three. ...

Got a netbook?  Need a charger? Get youself a minigorilla portable charger for netbooks! Designed specifically to work with the latest netbooks, the minigorilla is also able to charge e-readers, camcorders, mobile phones & many more electronic products that require a 19v DC input or less. Featuring a range of voltage settings (8.4v, 9.5v, 10.5v, 12v & 19v), the minigorilla has a 5v USB (Universal Serial Bus) output, meaning you can also recharge your mobile, iPod, iPhone, PDA, PSP & more.  Incorporating the latest HDLP (High Density Lithium Polymer) battery technology, the minigorilla will have maximum power efficiency to size & weight. The minigorilla will give up to 5-6 hours on a Sony Vaio P-series netbook at 10.5 volt setting.  minigorilla will give up to 2 hours on other netbooks set at 19 volts.  However, the minigorilla may discharge its power in 30 minutes as it's recharging the internal battery of the netbook. The combined recharge of the internal battery & the power used during initial connection gives up to an additional 2 hours of extra power. The minigorilla portable charger has the same finish as our brilliant powermonkey-e Xplorer charger for phones & handheld devices, with a laser-etched rubber coating, meaning it's tough & durable.  Supplied with a universal AC travel charger that works in over 150 countries around the world, a neoprene carry case & a whole host of monkeynuts to allow connectivity to the most popular of electronic products. minigorilla has many safety features including short-circuit & over-charging protection.  If a previously used output voltage saved in the minigorilla's memory is higher than the voltage a new device to be charged requires, the minigorilla will automatically shut off.  If the USB (Universal Serial Bus) & DC output ports are empty, minigorilla will automatically shut off after 2 minutes & if devices attached via USB (Universal Serial Bus) & DC output port are fully charged, minigorilla will also shut off. The minigorilla has a long storage life, if it hasn't been used for a year, the battery capacity lost is less than 10%. minigorilla features an LCD screen which indicates battery capacity status & level of charge left in minigorilla, & the blue backlight will automatically turn off after 5 seconds to save power. The minigorilla can be recharged via the included mains charger or via our fabulous solargorilla!  The solargorilla will fully recharge the minigorilla within 6-9 hours & minigorilla can be recharged via its included mains adaptor in 5.5 hours. minigorilla portable charger specification:  - Input: AC 140~240V, 50~60 Hz  - Output: USB (Universal Serial Bus) (5V)  - Output: 8.4V, 9.5V, 10.5v,   12V, 19V, 9000m Ah maximum capacity  - Average netbook power, 4, 800m Ah
- 4hrs battery  - Compatible with new range of Sony VAIO netbooks  - Dimensions: 150 x 83 x 14 mm  - Weight 265g 11 x laptop tips
- L01D for ASUS/ Compaq/HP
- L51D for ASUS/ Winbook
- L52D for ASUS/ Compaq/HP
- L53D for ASUS/ Compaq/HP/ Gateway/IBM/ Lenovo/ Fujitsu/NEC/ Olivetti/ Toshiba
- L54D for Fujitsu/ Panasonic/ Samsung/ Sony
- L55D for Toshiba
- L61D for Dell (power only)
- L72D for HP/LED monitor/ Scanner
- L73D for Samsung/ Sony
- L74D for HP/ GPS Navigator
- L75D for ASUS/ Lenovo/ Ben Q 9 x mobile & handheld device tips:
-
- Mini USB (Universal Serial Bus)
- Micro USB (Universal Serial Bus)
- Samsung G600
- LGChocolate
- DC 2.0
- DC 4.0
- Sony-Ericsson K750i
- motorola V66
- DC 3.5 (default tip)





















...

Transforms from monopod to tabletop tripod! Made from the same engineered aluminum as Calumet Monopods, the Minipod Tabletop provides you the short clearance to track subjects—whether they're athletes or animals—from the ground without getting your gear in the dirt. Or use the Minipod Tabletop as a mini-triopd to shoot from a table, bench, or other elevated object. Monopod

Height: 7.5" Tabletop Tripod

Height: 2.75" Mount

Sizes: 1/4 & 3/8" Maximum Weight Load: 6kg





...

With its low profile design, you can use the Mini TT1 Transmitter on camera to trigger remote i-TTL / CLS speedlights or studio flashes attached to Flex TT5 Transceivers. Place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight & in bright sunlight. The Mini TT1 is compatible with any Pocket Wizard radio for triggering manual flash or remote cameras. Control TL® Pocket Wizard’s newest firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capability through our proven radio system. Control TL allows remote i-TTL for Nikon CLS / i-TTL systems as well as Manual Power Control. Control TL firmware is configurable & upgradeable for “future-proof” continuous improvement. Dedicated CLS / i-TTL Triggering Locking your Mini TT1 Transmitter into the hot shoe of a Nikon DSLR camera, & mounting CLS / i-TTL flashes onto Flex TT5 Transceivers gives you full flash exposure control with the freedom & reliability of a Pocket Wizard radio. There are no special settings to make or modes to call up. Use the camera’s flash exposure controls for basic control of remote flashes, or add an AC3 Zone Controller or Nikon Master unit for even more flexibility. Manual Power Control Adjust the manual power settings of your remote Nikon Speedlights directly from a AC3 Zone Controller, SB-800 or SB-900 flash mounted on your on-camera Mini TT1 or Flex TT5. You can independently control the power output of up to three remote groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting simply through the user interface on the back of the SB-800 or SB-900 or with the dials of the AC3 Zone Controller. Now you can work with total control with your remote lights, without leaving your shooting position. Nikon SU-800 Wireless Speedlight Commander may also be used. High Speed Sync (Auto FP) The Mini TT1 makes Nikon's FP/HSS mode a lot more functional with the freedom of radio. Now you can use your i-TTL speedlights in FP sync all the way to 1/8000 in the middle of the day in bright sun! Control TL gains faster recycling times & more flashes per set of batteries when shooting in Nikon's FP / HSS Flash mode. Use this feature to shoot wide open in bright sun for amazing results. Auto Trigger Select for Control TL The hot shoe on both the Mini TT1 & Flex TT5 will trigger just about any hot shoe flash placed into it in addition to the Nikon Speedlight's it is designed for. Yes, you can now fire just about any hot shoe flash including Vivitar, Canon, etc., in manual mode only & not TTL mode.  Hyper Sync™: Our patent pending Hyper Sync technology allows photographers to achieve faster X-sync speeds, sometimes up to 1/8000 of a second, with full power flash. Now you can cut the ambient light & use wide-open apertures, outdoors in bright sunlight. Hyper Sync automatically adjusts the timing of your flash trigger so that faster than X-sync speeds can be achieved. With certain Canon camera & flash combinations, you can achieve sync all the way to 1/8000th of a second. Just imagine what you can do using flash in bright sun with wide open apertures & fast shutter speeds. Since Hyper Sync is a trigger function you can use any Pocket Wizard Receiver including the Flex TT5, Plus II or Multi MAX. Hyper Sync works with both TTL speedlites & full size studio flash. Please visit https://wiki.pocketwizard.com/hyper Syncfor configuring Hyper Sync. While performance varies by the camera & flash equipment being used, Hyper Sync will get the maximum possible out of any set-up. Hyper Sync™ Automation With Control TL Firmware Update 3.0 (Nikon) & 6.0 (Canon), configuring Hyper Sync has now been automated. Hyper Sync Automation adjusts Hyper Sync timing in two separate places – on the transmitter & on the receiving Control TL radio. The transmitting or on-camera Mini TT1 or Flex TT5 automatically adjusts Hyper Sync to compensate for changes made to shutter speed. Photographers can further refine Hyper Sync via the Pocket Wizard Utility. For more information on Configuring Hyper Sync Automation, visit the Hyper Sync section of the Pocket Wizard Wiki. High Speed Sync (HSS / FP Sync) Disable Mode Select either HSS Sync or Hyper Sync™ at shutter speeds above x-sync. This means that you can use Hyper Sync & the benefit of full power flash all the way up to 1/2000 with certain flash systems. Rear Curtain Sync Precise rear curtain sync capability is engaged using the camera's sync settings. Capture natural light trails with sharp exposures at the end – no “after trails!” Pre-Flash Boost Nikon flashes use a dual preflash system to calculate i-TTL exposure values. In many TTL situations, including shooting in full sun, over long distance or using diffusers or bounce flash, the normal pre-flash is simply not enough for the camera to see. Pocket Wizard's Pre-Flash Boost increases your remote Nikon flashes first preflash by three stops &, if necessary, the second preflash by one stop. The boost level can also be adjusted at the flash if necessary. Power Tracking When working with certain manual flashes, you can change any of your settings on your camera & the system adjusts for those changes. Change your camera's exposure compensation to adjust the flash output, or make adjustments in aperture or ISO & the system balances your flash for proper exposure. Built-in Hot Shoe Lock your Nikon flash into the Mini TT1’s dedicated hot shoe & combine your remote flash with on-camera flash or use the on-camera flash for additional CLS / i-TTL or Manual Power Control only. The metal & glass reinforced resin hot shoe assembly is a superstructure onto itself & incredibly durable. The best part; no more cords. Basic Trigger Mode Allows the Mini TT1 or Flex TT5 to work as a transmitter on ANY camera it will fit. Anyone looking for the small form factor of the Mini TT1 can use it on other DSLR’s, SLR’s or even medium format cameras with standard hot shoes. Pocket Wizard Compatible The Mini TT1 sends out two trigger signals; one on the new Control TL channels, & another on the same channels as all standard trigger Pocket Wizard radios so they will work with any unit you may already have. Pocket Wizard Utility
- Programmable & Upgradeable Use the supplied Pocket Wizard Utility software with the on-board USB (Universal Serial Bus) port to program the Mini TT1 to any Pocket Wizard channel & zone as well as many other custom settings. The Mini TT1 can be upgraded whenever updates & feature enhancements are available. Channels / Learn Mode The Mini TT1 has two channel configuration settings; C1 & C2. Each can be programmed as needed with up to 20 Control TL channels* for TTL photography or Manual Power Control, or 32 standard channels** for manual flash photography. Channels can be configured with the Pocket Wizard utility or use the Learn function to quickly program channels, or the reset function to configure back to factory settings.*- 20 Control TL channels for FCC/IC 344 MHz radios & three Control TL channels for CE 433 MHz radios.**
- 32 Standard channels for FCC/IC 344 MHz radios & 35 Standard channels for CE 433 MHz radios. Zone Control Add the AC3 Zone Controller on top of your Mini TT1 for Nikon & gain three zones of power control right from the camera’s position. Works in both auto/CLS/i-TTL & manual. Shut down an entire zone with the flick of a switch.AC3 Zone Controller sold separately. Speed Cycler with an AC3 Zone Controller Previously only seen with Pocket Wizard’s Multi MAX radios, this new mode is designed to rapidly cycle through multiple flash units fired individually in sequence. This allows photographers to fire a camera in sync with flashes faster than a single flash unit can recycle. It can also be used for triggering remote cameras sequentially. Speed Cycler is engaged on a transmitting Mini TT1 or Flex TT5 via the Pocket Wizard Utility. Speed Cycler mode requires an AC3 Zone Controller in the top hot-shoe of the on-camera Pocket Wizard radio. Zones A, B, & C will be triggered sequentially & individual zones can be disabled by setting the AC3’s Zone Switch to the off position. Both TTL & manual flash controls are supported. Flash Power Control without a Camer A Photographers can now take their AC3 & transmitting radio off-camera & use it to set power levels for any flash with a Control TL receiver, making it more convenient to use an optically triggered light meter, or control the power levels with just a Mini TT1/ Flex TT5 & AC3 in their hand while another photographer takes the pictures. Previously, an AC3 Zone Controller on a Mini TT1 or Flex TT5 needed to be on camera to send manual power levels to remote flashes. Now, when connected to a Mini TT1 or Flex TT5, manual power levels are transmitted to remote flashes when the TEST button is pressed even when the transmitter is off the camera. This affects both speedlights connected to receiving Flex TT5s & larger flashes like Alien Bees & Elinchrom RX units with Control TL receivers. Continuous Fast FPS Never before have you been able to shoot remote CLS / i-TTL non-stop in continuous high-speed mode. Fill the buffer! Nothing else comes close. Low-Profile Design The lay-flat design with integrated hot shoe & internal antenna keeps a very low profile on your camera. Powered by a CR2450 lithium coin cell battery.

...

With its low profile design, you can use the Mini TT1 Transmitter on camera to trigger remote E-TTL speedlites or studio flashes attached to Flex TT5 Transceivers. Place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight & in bright sunlight. The Mini TT1 is compatible with any Pocket Wizard radio for triggering manual flash or remote cameras. Control TL™ Pocket Wizard’s firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capability through our proven radio system. Control TL allows remote TTL for Canon E-TTL II systems as well as Manual Power Control. Control TL firmware is configurable & upgradeable for “future-proof” continuous improvement. Find more details on Control TL here. Dedicated E-TTL II Triggering Locking your Mini TTI Transmitter into the hot shoe of a Canon DSLR camera & mounting E-TTL II flashes onto Flex TT5 Transceivers gives you full autoflash exposure control with the freedom & reliability of a Pocket Wizard radio. There are no special settings to make or modes to call up. Use the camera, on-camera flash or flash commander controls for flash compensation, zone & ratio control. Manual Power Control Adjust the manual power settings of your remote Canon Speedlites directly from a AC3 Zone Controller, 580EX or 580EX II flash mounted on your on-camera Mini TT1 or Flex TT5. You can independently control the power output of up to three remote groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting simply with the dials of the AC3 Zone Controller or the user interface on the back of the 580 EX or 580 EX II flash. Manual Power Control also works with select studio lights when paired with Power ST4, Power MC2, or AC9/ Flex TT5. Now you can work with total control with your remote lights, without leaving your shooting position. Optimized HSS High Speed Sync takes Speedlite flash photography all the way to 1/8000th of a second sync. Control TL optimizes this amazing Canon feature & provides more light (which equals greater working distance), faster recycling times & more flashes per battery set when shooting in Canon's HSS/FP Flash mode. Use this feature to shoot wide open in bright sun for amazing results. Click here to watch a detailed video on Optimized High Speed Sync as narrated by Photographer Mark Wallace. Hyper Sync™ Our patent pending Hyper Sync technology allows photographers to achieve faster X-sync speeds, sometimes up to 1/8000 of a second, with full power flash. Now you can cut the ambient light & use wide-open apertures, outdoors in bright sunlight. Hyper Sync automatically adjusts the timing of your flash trigger so that faster than X-sync speeds can be achieved. With certain Canon camera & flash combinations, you can achieve sync all the way to 1/8000th of a second. Just imagine what you can do using flash in bright sun with wide open apertures & fast shutter speeds. Since Hyper Sync is a trigger function you can use any Pocket Wizard Receiver including the Flex TT5, Plus II or Multi MAX. Hyper Sync works with both TTL speedlites & full size studio flash. Please visit https://wiki.pocketwizard.com/hyper Sync for configuring Hyper Sync. While performance varies by the camera & flash equipment being used, Hyper Sync will get the maximum possible out of any set-up. Hyper Sync™ Automation With Control TL Firmware Update 3.0 (Nikon) & 6.0 (Canon), configuring Hyper Sync has now been automated. Hyper Sync Automation adjusts Hyper Sync timing in two separate places – on the transmitter & on the receiving Control TL radio. The transmitting or on-camera Mini TT1 or Flex TT5 automatically adjusts Hyper Sync to compensate for changes made to shutter speed. Photographers can further refine Hyper Sync via the Pocket Wizard Utility. For more information on Configuring Hyper Sync Automation, visit the Hyper Sync section of the Pocket Wizard Wiki. High Speed Sync (HSS or FP Sync) Disable Mode Select either HSS Sync or Hyper Sync™ at shutter speeds at or over 1/640. This means that you can use Hyper Sync & the benefit of full power flash all the way up to 1/8000 with certain flash systems. Optimized Rear Curtain Sync Precise rear curtain sync capability is engaged automatically, no buttons to press. Set the shutter speed at which rear curtain sync is engaged with the Pocket Wizard Utility. Capture natural light trails with sharp exposures at the end – no “after trails!” Pre-Flash Boost In some E-TTL situations, including shooting in full sun, over long distance or using diffusers or bounce flash, the normal pre-flash is simply not enough for the camera to see. With Pre-Flash Boost, the pre-flash is two stops brighter. This will Approx. double the working distance of E-TTL II, compensating for the light loss when defusing or bouncing. Power Tracking When working with the Power ST4, Power MC2 & AC9/ Flex TT5 paired with compatible manual flashes, you can change any of your settings on your camera & the system adjusts for those changes. Change your exposure compensation to adjust the exposure or make adjustments in aperture or ISO & the system balances your flash for proper exposure. Zone Control Add the AC3 Zone Controller on top of your Mini TT1 & gain three zones of power control right from the camera’s position. Works in both auto/E-TTL II & manual. Shut down an entire zone with the flick of a switch. Speed Cycler with an AC3 Zone Controller Previously only seen with Pocket Wizard’s Multi MAX radios, this new mode is designed to rapidly cycle through multiple flash units fired individually in sequence. This allows photographers to fire a camera in sync with flashes faster than a single flash unit can recycle. It can also be used for triggering remote cameras sequentially. Speed Cycler is engaged on a transmitting Mini TT1 or Flex TT5 via the Pocket Wizard Utility. Speed Cycler mode requires an AC3 Zone Controller in the top hot-shoe of the on-camera Pocket Wizard radio. Zones A, B, & C will be triggered sequentially & individual zones can be disabled by setting the AC3’s Zone Switch to the off position. Both TTL & manual flash controls are supported. Flash Power Control without a Camera Photographers can now take their AC3 & transmitting radio off-camera & use it to set power levels for any flash with a Control TL receiver, making it more convenient to use an optically triggered light meter, or control the power levels with just a Mini TT1/ Flex TT5 & AC3 in their hand while another photographer takes the pictures. Previously, an AC3 Zone Controller on a Mini TT1 or Flex TT5 needed to be on camera to send manual power levels to remote flashes. Now, when connected to a Mini TT1 or Flex TT5, manual power levels are transmitted to remote flashes when the TEST button is pressed even when the transmitter is off the camera. This affects both speedlights connected to receiving Flex TT5s & larger flashes like Alien Bees & Elinchrom RX units with Control TL receivers. Continuous Fast FPS Radios work a lot fast then infrared communications allowing you to shoot with remote flash in E-TTL as speeds close to your maximum frames per second. Never before have you been able to shoot remote E-TTL non-stop in continuous high-speed mode. Fill the buffer! Nothing else comes close. Built-in Hot Shoe Lock your Canon flash into the Flex TT5’s dedicated hot shoe & combine your remote flash with on-camera flash or use the on-camera flash for additional E-TTL II or Manual Power Control only. The metal & glass reinforced resin hot shoe assembly is a superstructure onto itself & incredibly durable. The best part; no more cords. Basic Trigger Mode Allows the Mini TT1 or Flex TT5 to work as a transmitter on ANY camera it will fit. Anyone looking for the small form factor of the Mini TT1 can use it on other DSLR’s, SLR’s or even medium format cameras with standard hot shoes. The Mini TT1 & Flex TT5 are completely reverse compatible with all previous Pocket Wizards so they will work with whatever Pocket Wizards you already own. Pocket Wizard Compatible The Mini TT1 operates on the same channels as all other Pocket Wizards & will work with any unit you may already have. Pocket Wizard Utility
- Programmable & Upgradeable Use the supplied Pocket Wizard Utility software with the on-board USB (Universal Serial Bus) port to program the Mini TT1 to any Pocket Wizard channel & zone as well as many other custom settings. The Mini TT1 can be upgraded whenever updates & feature enhancements are available (many planned!). Channels / Learn Mode The Mini TT1 has two channel configuration settings; C1 & C2. Each can be programmed as needed with up to 20 Control TL channels* for TTL photography or Manual Power Control, or 32 standard channels** for manual flash photography. Channels can be configured with the Pocket Wizard utility or use the Learn function to quickly program channels, or the reset function to configure back to factory settings.*
- 20 Control TL channels for FCC/IC 344 MHz radios & three Control TL channels for CE 433 MHz radios.**
- 32 Standard channels for FCC/IC 344 MHz radios & 35 Standard channels for CE 433 MHz radios. Automatic HSS Trigger Timing for Manual Flash This means that you can mix a manual flash with an E-TTL II flash in HSS/FP Sync shots at 1/640 & above with certain flash systems. Auto Trigger Select for Control TL The hot shoe on both the Mini TT1 & Flex TT5 will trigger just about any hot shoe flash placed into it in addition to the Canon Speedlite’s it is designed for. Yes, you can now fire just about any hot shoe flash including Vivatar, Nikon, etc., in manual mode only & not TTL mode. (max trigger voltage < 50V, use P2 port for up to 200V) Low-Profile Design The Mini TT1 Transmitter is the smallest Pocket Wizard ever, utilizing an internal antenna & common coin-cell battery. At just 2.3oz (65 grams) you barely realize it’s on the camera. Power Saver The Mini TT1 Transmitter will go to sleep 10 seconds after your camera does to conserve energy. Just touch the shutter button half way to wake both the camera & the Mini TT1. It works on the supplied CR2450 coin cell battery (or optional CR2354 for in the field options) that provide hundreds of hours of battery life.


...