Accommodates a variety of batteries including AA-sized batteries of various types & Nikon’s Rechargeable Li-ion Battery EN-EL15 (see specifications). The MB-D14 has its own dedicated shutter-release button & command dials for more comfortable composition when shooting with the camera in vertical orientation. ...

The Nikon MB-D15 Battery Grip is designed for the Nikon D7100/D7200 DSLR cameras. It enables seamless switching between power sources, & is equipped with a shutter release button, AE/AF lock button, multi selector, & main & sub-command dials for enhanced operation when taking photographs with the camera vertically orientated. The MB-D15 grip is powered by 1 or 2 Nikon EN-EL15 batteries or six Ni-MH/lithium AA-size batteries. To use the MB-D15 with AA batteries, use the MS-D14 AA Battery Holder. When using EN-EL15 batteries to power the MB-D15, use the MS-D14EN Battery Holder. ...

The MB-D16 Multi Battery Power Pack can be powered either by six AA batteries (Alkaline or Ni-MH or Lithium), or EN-EL15 rechargeable Li-ion batteries. To use the MB-D16 with AA batteries, use the MS-D16 AA Battery Holder. When using EN-EL15 batteries to power the MB-D16, use the MS-D16EN Battery Holder. The MB-D16isequipped with a shutter-release button, AE/AF lockbutton, multi selector, & main- & sub-commanddials for enhanced operation when taking photographsin portrait (tall) orientation. ...

Nikon MB-D17 Battery Grip Multi Power Pack The MB-D17 is a Multi-Power Battery Pack for the D500, increasing the number of shots per charge that you can get. It features a Shutter release button & Fn button for ease in vertical shooting. The MB-D17 can be powered by eight AA batteries or by a single EN-EL 15 or EN-EL 18a Lithium Ion battery. When using the MB-D17 with eight AA batteries, use the MS-D12 Battery Holder; when using the EN-EL 15 battery to power the MB-D17 use the MS-D12EN Rechargeable Li-ion Battery Holder. No battery holder is needed when using the EN-EL 18a to power the MB-D17. The MB-D17 can also be powered via the EH-5b AC power adapter using the EP-5B power connector. ...

The Multi-Power Battery Pack MB-D200 is ergonomically designed for extended stability & potential for vertical shooting. It runs either on AA-size batteries or 2x EN-EL3e batteries. When 2 EN-EL3e batteries are used, power is sequentially consumed, so the battery exhausted first can be replaced independently. It has an extra main- & sub command dial & alternative buttons for shutter release & AF start. ...

The Quantum MB5 connection cable will allow a QB1+ or QB1c battery pack to power the following flashes: Canon 580EX Phoenix APZ 99C Promaster 5550DX, 5750DX, FTD5600M, 5700M, 5950, 6500M, 7000M, Vivitar 730AFC ...

New monolight with X-changeable battery. The flashes can be used without cable „on location“ or in the studio. The units feature replaceable battery drawers that allow unlimited flash power without mains supply. The batteries can be charged inside & outside of the housing of the flash unit. All devices offer a bright, easily visible display for flash power setting. The flash power is adjustable in 1/10 f-stops using a turning knob. There is an internal power reduction when the flash power is dumped; in this case, no flash has to be manually released. The Omega shaped flashtube has a long life-span; in case, it can be user-friendly replaced through a 3-point connection system. For flash triggering, the devices have a switchable photocell; a switchable audio signal indicates flash readiness. A temperature-controlled build-in fan prevents from overheating. The devices are already prepared for radio operation with built-in remote control modules. The flash units can be individually controlled by the Priolite radio remote control; they communicate bi-directional over distances up to 300 m. The flash power setting of an individual flash unit appears on the RC display & can be adjusted, modeling light options can be selected & flashes can sent into ‘sleep mode’. Up to 36 wireless flash devices can be remotely power controlled & triggered. The massive reflector mechanics works with no external adapter to hold accessories from Bowens SLine & many Hensel reflectors. Except for the handle, all parts of the units are constructed of solid metal. The support rail profile is made from aluminum casting, the reflector mechanics is made from die-cast aluminum. The especially strong tilting head allows for tilting & rotation of the device & can hold even heavy lighting accessory like big softboxes or octaforms. The MBX1000 is equipped with a 100 W halogen lamp. ...

New monolight with X-changeable battery. The flashes can be used without cable „on location“ or in the studio. The units feature replaceable battery drawers that allow unlimited flash power without mains supply. The batteries can be charged inside & outside of the housing of the flash unit. All devices offer a bright, easily visible display for flash power setting. The flash power is adjustable in 1/10 f-stops using a turning knob. There is an internal power reduction when the flash power is dumped; in this case, no flash has to be manually released. The Omega shaped flashtube has a long life-span; in case, it can be user-friendly replaced through a 3-point connection system. For flash triggering, the devices have a switchable photocell; a switchable audio signal indicates flash readiness. A temperature-controlled build-in fan prevents from overheating. The devices are already prepared for radio operation with built-in remote control modules. The flash units can be individually controlled by the Priolite radio remote control; they communicate bi-directional over distances up to 300 m. The flash power setting of an individual flash unit appears on the RC display & can be adjusted, modeling light options can be selected & flashes can sent into ‘sleep mode’. Up to 36 wireless flash devices can be remotely power controlled & triggered. The massive reflector mechanics works with no external adapter to hold accessories from Bowens SLine & many Hensel reflectors. Except for the handle, all parts of the units are constructed of solid metal. The support rail profile is made from aluminum casting, the reflector mechanics is made from die-cast aluminum. The especially strong tilting head allows for tilting & rotation of the device & can hold even heavy lighting accessory like big softboxes or octaforms. The LED modeling light at the MBX 500 provides a bright light by preserving the battery. ...

These units feature replaceable battery drawers that allow unlimited flash power without mains supply. The batteries can be charged inside & outside of the housing of the flash unit. All devices offer a bright, easily visible display for flash power setting. The flash power is adjustable in 1/10 f-stops using a turning knob. There is an internal power reduction when the flash power is dumped; in this case, no flash has to be manually released. The Omega shaped flashtube has a long life-span; in case, it can be user-friendly replaced through a 3-point connection system. For flash triggering, the devices have a switchable photocell; a switchable audio signal indicates flash readiness. A temperature-controlled build-in fan prevents from overheating. The devices are already prepared for radio operation with built-in remote control modules. The flash units can be individually controlled by the Priolite radio remote control; they communicate bi-directional over distances up to 300 m. The flash power setting of an individual flash unit appears on the RC display & can be adjusted, modeling light options can be selected & flashes can sent into ‘sleep mode’. Up to 36 wireless flash devices can be remotely power controlled & triggered. The massive reflector mechanics works with no external adapter to hold accessories from Bowens SLine & many Hensel reflectors. Except for the handle, all parts of the units are constructed of solid metal. The support rail profile is made from aluminum casting, the reflector mechanics is made from die-cast aluminum. The especially strong tilting head allows for tilting & rotation of the device & can hold even heavy lighting accessory like big softboxes or octaforms. The LED modeling light at the MBX 500 provides a bright light by preserving the battery. ...

Canon MC-08 Maintenance Cartridge For Imageprograf IPF8000 & IPF9000 Printers. ...