Specifically formulated to be used in conjunction with any brush with SCF technology, whether it is the Arctic Butterfly® or any of our Sensor Brushes™. Sensor Brush™ Clean is p H buffered to avoid extreme acidity or alkalinity so as to not affect the existing charges on the brush while safely cleaning any residual debris. ...

Sensor Clean™ has many characteristics that make it an excellent choice for cleaning your sensor. While it is best used on water based stains & light dust contamination, it also provides excellent dust repellent properties & anti-fogging capabilities. Sensor Clean™ works best with Visible Dust Green Series Swabs. All of our solutions are safe on ITO & non ITO coated sensors. Visible Dust liquid cleaners (Sensor Clean, VDust Plus & Smear Away) when used with Visible Dust Sensor Cleaning swabs are safe & effective on ALL DSLRs including: Newer Canon DSLRs, such as the 400D, 40D, 1D MKIII, & 1 Ds MKIII, Newer Nikon D300 & D3 & Alpha Sony 700. Cautionary Note: Visibledust sensor cleaning solutions & swabs are calibrated to work together to produce optimal & safe results. Please DO NOT USE alternative solutions with our swab. A simple grain of quartz which is found in cheaper solutions are enough to produce an expensive scratch on the low pass filter. Visible Dust solutions are manufactured to the highest standard of quality that is practiced in pharmaceutical industries. Visibledust solutions are calibrated for NORMAL evaporative rates: to keep the swab moist at all time to reduce the risk of scratch to increase the cleaning power, less swabbing more economical to reduce friction by being moist all time during swabbing The potential risk of FAST evaporative solutions used as sensor cleaning are the following: an increase in the risk of damage & stress to sensor coating by using premature dry swab a great reduction in cleaning power by shortening the contact time between contaminants & solution due to the increased evaporation rate of the solution increase in friction by using a premature drying swab, resulting in static charge build up leading to an even greater dust accumulation on the sensor Visibledust cleaning liquids are intended to be placed on the swab first, so the concern for liquid seeping through the sensor is not valid or accurate. On the other h&, the disadvantages of a generic brand or FAST evaporative liquid used for sensor cleaning may in fact may casue damage to the sensor by requiring repeat swabbing & is not recommended. ...

Sensor cleaning voucher is valid for one clean at any of our stores. ...

Sensor Swabs are designed for cleaning CCD chips & other delicate or hard to reach optical & imaging surfaces. Clean room manufactured & sealed, these swabs are the ultimate in purity. Although these items are not officially approved by Nikon* or Canon*, several digital imaging site message boards have threads discussing the need for cleaning these cameras, & the success with using these products. Read all instructions first & call us if you have questions
- before proceeding. When used as directed these products are easy to use & safe & yield excellent results! Please see below to find the correct Sensor Swab for your camera. * For details on which type of sensor swabs you need for your camera click here
...

Sensor Swabs™ are designed for cleaning CCD chips & other delicate or hard to reach optical & imaging surfaces. Clean room manufactured & sealed, these swabs are the ultimate in purity. Sensor Swabs must be used with Eclipse or E2 Cleaning Fluid, available separately Size Two for Canon D30/D60/10D/20D/30D/40D /300D/350D/400D/450D, Nikon DX, Pentax, Sony ...

Gitzo's Systematic tripods are modular, with a flat centre disk that can be interchanged for centre columns, levelling bases & other components. Because they have leg angle settings but no column as standard, Systematic tripods are all capable of near-groud level shooting. Leg tubes are in 6X carbon fibre with Gitzo's efficient G-locks. The GT2542S is a lightweight, compact 4-section tripod in Gitzo's smallest Series 2. Designed for strength & torsional rigidity under loads of up to 25kg (55lb) & with DSLRs & lenses up to 300mm, it reaches compact level when fully open. ...

Gitzo's Systematic tripods are modular, with a flat centre disk that can be interchanged for centre columns, levelling bases & other components. Because they have leg angle settings but no column as standard, Systematic tripods are all capable of near-groud level shooting. Leg tubes are in 6X carbon fibre with Gitzo's efficient G-locks. In Gitzo's Series 3
- a particularly flexible & adaptable size ideal to be used with lenses up to 400mm & under loads of up to 25kg
- the GT3542LS is 4-section tripod that reaches eye level when fully open, yet folds to a relatively compact closed size.

...

Gitzo's Systematic tripods are modular, with a flat centre disk that can be interchanged for centre columns, levelling bases & other components. Because they have leg angle settings but no column as standard, Systematic tripods are all capable of near-groud level shooting. Leg tubes are in 6X carbon fibre with Gitzo's efficient G-locks. The GT3542XLS is an extra-long 4-section tripod that reaches overhead level when fully open. It belongs to Gitzo Series 3
- a particularly flexible & adaptable size, ideal to be used with lenses up to 400mm & under loads of up to 25kg.
...

Gitzo's top-of-the-range Systematic tripods are modular, with a flat centre disk that can be interchanged for centre columns, levelling bases & other components. Because they have leg angle settings but no column as standard, Systematic tripods are all capable of near-groud level shooting. Leg tubes are in 6X carbon fibre with Gitzo's efficient G-locks. The GT5542LS is a Gitzo Series 5 tripod designed for strength & torsional rigidity under extreme loads of up to 40kg (88lb) & with lenses up to 800mm. With its 4-section legs fully extended, it reaches eye level even without using a centre column, yet it remains compact when folded. ...

Fujifilm Series Metal Hand Grip For X100/X100T/X100S To increase the camera's grip. Both battery & memory card can be swapped with the grip in place. in addition, a tripod screw hole can be placed in centre of the optical axis & the base parts are equipped with a 38mm width dovetail protrusion plate, allowing use as a quick shoe mount when using a dovetail groove tripod pedestal. ...