More From Contributor

£169.00
Will provide years of service day in & day out, whether you're cutting film, prints, dry mount tissue or digital images. ...
Archived Product
£179.00
The Rollcut range is designed & manufactured to BS (British Standard) 5498 to ensure safe, accurate & speedy trimming & cutting. These trimmers are an invaluable accessory to any Drawing Office, Studio, Factory or Print room.  Will provide years of service day in & day out, whether you're cutting film, prints, dry mount tissue or digital images. Calibrated alignment guide Clear plastic clamping strip Removable cutting tray ...
Archived Product
£225.00
Will provide years of service day in & day out, whether you're cutting film, prints, dry mount tissue or digital images. ...
Archived Product
£300.00

Features: Calibrated Alignment Guide Clear Plastic Clamping Strip Removable Cutting Tray ...
Archived Product
£1237.63
Please note: does not include background paper. The Colorama Rolleasy is an exceptionally robust, hassle free professional studio background support system. Unlike other systems on the market it will fully support a 3.55m (12ft) wide roll without the roll bowing over time. The system uses a detachable crank to smoothly raise & lower each background which is then automatically locked in position. With the Colorama Rolleasy there are no obstructions within the shooting area, no chains or free swinging parts. The system is available as complete kits or as separate components to create a customised system. It is also expandable as supplementary units can be installed at any time to increase the number of rollers. ...
Archived Product
£1054.00
DJI Ronin-M Handheld Gimbal System Ronin-M Handheld Gimbal System. Weighing just 5 pounds (2.3 kg), about half the weight of the original Ronin, the slimmed down Ronin-M is small enough to fit into your backpack & take anywhere, yet strong enough to support camera set ups weighing up to 8 punds (3.6kg). Capture light shots, even when you have almost no space to work, & easily transport your Ronin-M. The top handle bars quickly & easily twist off, allowing you to minimize it's size, achieve different shooting configurations, & pack or unpack it in seconds. Quick facts: • Total weight of 2.3kg (5.07 lb.) • Support cameras up to 3.6kg (8 lb.) • Precision of Control: ±0.02° • Tool-Less Balance Adjustment System • Transmitter for Remote Pan/ Tilt Control • Silent mode for quiet operation •USB & Power Tap Power Outputs • Assistant Software for i OS & Windows • Bluetooth Wireless Interface for Setup ...
Archived Product
£45.00
DJI Ronin-M Mobile Device Holder With the Mobile Device Holder, you can mount your smartphone or tablet on your Ronin-M & watch a live HD view from your camera as you operate the gimbal. Devices up to 170mm in width can be mounted, including the iPad Air. The holder can only be used with the RONIN-M Monitor/ Accessory Mount. ...
Archived Product
£1364.00
DJI Ronin-MX 3-Axis Handheld Gimbal Cinematic film making demands rapid setup & a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, & Smooth Track™ algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top & at the bottom. Silent motors prevent on set mics picking up motor noise. Designed to resist high G-forces using powerful motors & IMUs, the Ronin-MX is engineered to maintain stability & hold horizon when mounted to an aircraft or a vehicle. When mounted to the M600 aerial system, it communicates directly with DJI’s flight controller & when attached to vehicles, it connects to an optional GPS module allowing it to stabilize actively for a smoother shot. A slip ring allows the Ronin-MX to rotate 360° continuously when mounted to aircraft or vehicles, opening up more creative options. This is further enhanced by an increase in tilt axis range from 90° straight down & beyond to 135°. Popular features of the Ronin series such as the three modes of operation & Smooth Track are also present, giving film makers a range of creative angles & movements. The Ronin-MX is compatible with Lightbridge 2, providing long-range HD video transmission from the air to the ground from up to 3.1miles (5km) away. If combined with the optional DJI Focus & Focus Expansion Module, focus or aperture can also be pulled remotely with a twist of the wrist. An optional Remote Start/ Stop add-on provides the ability to control shooting on a range of airborne cameras. Using DJI Assistant & the dedicated Assistant app for i OS & Android allows complete customization of the Ronin-MX & its behavior. If connected to Lightbridge 2, the DJI GO app can be used to control how the M600 flies including Intelligent Flight Modes, remote control modes, move the gimbal & see an HD live feed from the camera. A redesigned structure moves the Ronin-MX battery from the back to the front. This centers the weight of the camera, minimizing instability when flying directly forwards. It also dramatically increases the Ronin’s agility & ability to handle rapid movements or high-G situations. Built extensively of lightweight magnesium, the Ronin-MX weighs just 6.11lb (2.77kg). This lightness allows it to be mounted to the M600 even when equipped with cameras as advanced as the RED EPIC, & to vehicles with a minimum impact on vehicle handling. A combination of stronger motors & ESCs makes the Ronin-MX 50% more powerful than the Ronin-M. This additional stiffness & power allows the system to better withstand wind resistance when mounted to moving vehicles & aircraft, as well as more rapid movements. Cameras such as the RED EPIC need an external battery for power. A dedicated position designed for an optional battery plate provides an easy, cable free mounting point for a 2nd DJI Intelligent Battery. This provides two 12V P-tap power sources for powering cameras & accessories. Intelligent Ronin-MX batteries are compact, light & offer a long battery life of 3 hours. Multiple batteries can be easily brought to set for a full day of filming. Over-charge & over-depletion protection is built in, as is individual cell charge balancing. Remaining power is shown by clear LEDs & in the DJI GO app. ...
Archived Product
£170.00
Syrp rope is a specialised accessory designed to work specifically with the Genie. The rope comes in 3 different sizes to expand the length of your linear move, whether you need to move 10m, 50m, 100m or anywhere in between Syrp rope has you covered. ...
Archived Product
£44.00
Syrp rope is a specialised accessory designed to work specifically with the Genie. The rope comes in 3 different sizes to expand the length of your linear move, whether you need to move 10m, 50m, 100m or anywhere in between Syrp rope has you covered. ...
Archived Product

Rolling Studio Stand With Sliding Support Arm

The Calumet Rolling Studio Stand assembles in minutes. It features a sturdy folding base with locking casters, and an adjustable cam, to plumb the the column when used on uneven floors. The sliding support arm features a hand grip that allows you to easily adjust the height of your mounted accessories from 13” to 98”. This unique grip action assures that your equipment will stay in place. It comes with a 3/8” platform adapter and a mounting stud with 1/4” and 3/8” threads. This system is recommended for indoor use only. Weighs just 13.8 lbs. (6.3kg). Includes: One split-column stand with locking casters Sliding support arm 3/8” platform adapter Mounting stud with 1/4“ and 3/8” threads One year limited warranty Manual: Click here to read the manual for MF6880.
RIP - This product is no longer available on our network. It was last seen on 07.10.2017

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£159.00

Product Description

The Calumet Rolling Studio Stand assembles in minutes. It features a sturdy folding base with locking casters, & an adjustable cam, to plumb the the column when used on uneven floors. The sliding support arm features a hand grip that means that you can easily adjust the height of your mounted accessories from 13” to 98”. This unique grip action assures that your equipment will stay in place. It comes with a 3/8” platform adapter & a mounting stud with 1/4” & 3/8” threads. This system is recommended for indoor use only. Weighs just 13.8 lbs. (6.3kg).
Includes:: One split-column stand with locking casters Sliding support arm 3/8” platform adapter Mounting stud with 1/4“ & 3/8” threads One year limited warranty Manual: Click here to read the manual for MF6880.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Hand - A part of the body at the end of the arm
Hand - A pointer which indicates time on a clock face
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
Equipment - A product or good that is tactile.
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
Adjustable - Something that can be changed or slightly modified to fit.
Manual - A book of instructions to build or operate items, also a form of labour which your hands are used.
Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
Adjustable - Something that can be changed in order to fit better.
Sturdy - something hat is very stable and is solidly built.

Supplier Information

Calumet Photographic
Page Updated: 2017-03-29 12:07:29

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu