This receiver is for use with the Calumet Quad Plus 2.4 G Hz Wireless Trigger system. The Quad Plus enables you to assign your flashes to four groups so that you can either isolate or combine different groups to allow for complex lighting setups. The trigger's four channels can be used so that up to four different photographers can shoot with the Quad Plus in the same location without triggering each other's flashes. The receiver triggers flashes manually & offer flash wake-up functions on compatible flashes. They can also be used as a wireless shutter release for your camera by using an adapter cord (sold separately). This receiver is optimized for use with Nikon Speedlights, but can also be used to trigger studio strobes or with Olympus & Sony Cameras as a wireless shutter release. Manual: Click here to read the manual for CF00874. ...

The RQ Flashhead Cable connects the RQ A / S Heads with the Ranger Quadra Battery power pack. The cable is 3.5 m long. (The standard Flashhead Cable supplied with each RQ Flashhead is 2.5 m) Note :  Always switch the RQ Battery Power Pack off when cables, heads are connected or disconnected.   ...

The QUADX Dolly makes light work of moving the QUADX Generator. Simply sit the Pack on top of the Dolly & effortlessly glide the generator to its new location. ...

This two step Shutter Release (Motor Drive) cord is intended for Canon 1v, 3, D2000, D30, D60, 10D, 20D, 1D, 1 Ds, 1D Mark II. ...

When the QF68 is attached to any model Qflash by removing the standard reflector & locking the softbox into its place, a bigger, softer light source for close-up portraiture is created. With the softbox connected, this combination can be mounted to a camera bracket or fastened to an umbrella bracket for placement on a light st&. The Qflash/softbox combination is suited for either TTL or manual operation. When finished shooting, the QF68 folds up very neatly into its carrying bag for your convenience. ...

Quantum is in the business of data protection
- Quantum knows what it takes to meet today's demands. From the desktop to the data
...

Apple Boxes For propping, leveling, sitting or standing. Precisely made, center supported. 12 x 2 x 20" (30 x 5 x 51cm). Unstained. ...

Visible Dust Quasar Plus Sensor Loupe 7X Quasar Plus Sensor Loupe 7x is an improvement to Quasar Sensor Loupe 7x. Quasar Plus comes with a 52 mm metal ring to attach filters & close-up lenses for higher contrast & magnification. For example, using amber filter effectively blocks blue light increasing the contrast & reducing the glare accompanied with sharper image & less strain to the eyes. Blue light blockers are ideal for low vision users. The attachment of UV filters can enhance image clarityand protecting the ED glass lens. The attachment of polarized filter can be helpful in distinguishing stain from dust. The filter ring in Quasar Plus allows the attachment of various hoods for a glare free image when used outside in the bright daylight. The metal filter rings allows a connection to various camera lens system via connector tube for creative photography. The Bright Vue technology used in Quasar Plus uses 6  (Patented) super bright LED with vari-angled orientation designed specifically to create 3D/ image to identify the smallest spots with the highest resolution. The ED (Extra-Low Dispersion)glass with Fluorine coated (Mg F2) lens allows for reducing chromatic aberration & sharper image. The ED Glass (Extra-Low Dispersion) lens in Quasar Plus has been lowered for a better & enhanced focusing system for sensors placed in deeper cavity. Overall, the new Quasar Plus is a more versatile tool in creative photography with additional functionality: enhanced Focusing System for sensor placed in deeper cavity Identifies Smallest Spots on Sensor Extra-low Dispersion glass lens Six super bright LED Lights / Vari-Angled Orientation Bright Vue technology Creates 3D Image of Dust Particles Fluorine Coated / High Resolution Reduces Chromatic Aberration Can be used for Inspecting Negatives Easy On/ Off Operation

Includes:: Two Lithium Batteries & hard Case

...

The Quattro is a continuous light source that uses four spiral fluorescent lamps & a reflector to create a 5500K directional light. The output is equal to a 500w incandescent lamp yet has a low-temperature operation allowing the light to be placed close to heat-sensitive subjects such as food. The Quattro has the option of using just two fluorescent lamps or all four – giving you even more control over your light.

Features: • Four 35w energy-efficient spiral fluorescent lamps (equivalent to a 500w incandescent lamp) • 5500K daylight colour temperature delivers superior colour rendering
- ideal for digital photography • Long lamp life of 6, 000 hours means less time & money replacing lamps • Pan/tilt adjustment controls • One Quattro Fluorescent Light • Four 35-watt Spiral Fluorescent Lamps • Reflector • AC Cord


...

The 394 is a RC4 low profile rectangular rapid connect adapter. ...