The Audio Technica PRO 70 miniature condenser microphone achieves full-sounding pickup & is known for outstanding consistency & dependable performance. Supplied with both a clothing clip & guitar mount, it provides natural & articulate vocal reproduction when used as a clip-on lavalier & excels in pickup of acoustic guitar. The PRO 70 is designed to make music & speech clearly & comfortably audible, yet never draw attention to itself or its operation. The microphone is equipped with a low-frequency roll-off switch that allows for reduced pickup of room noise. The versatile PRO 70 may be powered by either battery or phantom power. Its cardioid polar pattern reduces pickup of sounds from the sides & rear, improving isolation of the desired sound source. Audio Technica PRO 70

Features: Miniature condenser microphone is ideal for both vocal & acoustic guitar applications Natural & articulate vocal reproduction when used as a clip-on lavalier—clothing clip included Excels in pickup of acoustic guitar with included instrument adapter Cardioid polar pattern reduces pickup of sounds from the sides & rear, improving isolation of desired sound source Switchable low-frequency roll-off Corrosion-resistant contacts from gold-plated XLRM-type connector Operates on battery or phantom power 1.8 m cable permanently attached between microphone & power module Audio Technica PRO 70 Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 100-14, 000 Hz Low Frequency Roll-Off: 80 Hz, 8 d B/octave Open Circuit Sensitivity: Phantom: -45 d B (5.6 m V) re 1V at 1 Pa, Battery: -45 d B (5.6 m V) re 1V at 1 Pa Impedance: Phantom: 200 ohms, Battery: 200 ohms Maximum Input Sound Level: Phantom: 123 d B SPL, 1 k Hz at 1% T.H.D., Battery: 123 d B SPL, 1 k Hz at 1% T.H.D. Dynamic Range (typical): Phantom: 96 d B, 1 k Hz at Max SPL Battery: 96 d B, 1 k Hz at Max SPL Signal-To-Noise Ratio: 67 d B, 1 k Hz at 1 Pa Phantom Power Requirements: 11-52V DC, 2 m A typical Battery Type: 1.5V AA/UM3 Battery Current/ Life: 0.4 m A / 1200 hours typical (alkaline) Switch: Off, on-flat, on-roll-off Weight: (MICROPHONE) 0.3 oz (8 g), (POWER MODULE) 4.7 oz (134 g) Dimensions: (MICROPHONE) 0.98 inches (25.0 mm) long, 0.40 inches (10.2 mm) diameter, (POWER MODULE) 3.27 inches (83.0 mm) H x 2.48 inches (63.0 mm) W x 0.87 inches (22.0 mm) D Output Connector: Integral 3-pin XLRM-type Cable: Integral 6 ft (1.8 m), permanently attached between microphone & power module Accessories Furnished: AT8411 clothing clip; AT8444 instrument adapter; power module; windscreen; battery; soft protective pouch

...

Spare Pro adjustable swivel clamp to fit dogcam Bullet HD2. Requires either curved or flat surface mount to this item. ...

Phottix Pro Beauty Dish MK II with Bowens Speed Ring, White
- 16in/ 42cm Beauty dishes are an extremely popular lighting modifier.
...

The Lexar Pro CFR1 Workflow CF Reader USB (Universal Serial Bus) 3.0 is a Compact Flash card reader with high-speed file transfer & can be connected with the Lexar Pro Workload Hub USB (Universal Serial Bus) 3.0 (not included) for simultaneous data transfer. A USB (Universal Serial Bus) 3.0 cable is included. The Lexar Professional Workflow Reader Solution

Includes:: a four-bay reader hub & your choice of card readers, supporting today’s most popular card formats. Pick & choose the right reader combination for your needs, use the hub system with PC or Mac, & take control of your workflow. Transfers images from up to four memory cards at once. Whether four of the same format or four completely different card types, the solution lets you offload your work, faster. Modular design The solution

Includes:: a four-bay reader hub & your choice of readers, supporting SDHC/SDXC UHS-I, UDMA 7 Compact Flash, & XQD formats. Pick & choose the right reader combination for your needs. Remove readers from the hub for individual use on the go. Fast file transfer Transfer RAW images, high-res photos, & HD, 3D, & 4K video files at USB (Universal Serial Bus) 3.0 speeds when using a USB (Universal Serial Bus) 3.0 port. Simple setup & use Simply plug your readers of choice into the hub & start transferring files. It’s that easy. Eliminate cable clutter while using just one USB (Universal Serial Bus) port with this four-bay solution, & take control of your workflow. Future-proof your workflow setup The modular design of the Professional Workflow Reader Solution makes it adaptable to changing technology. As Lexar introduces new card formats for this system, you’ll be able to swap in new readers to meet your changing needs. Warranty The Lexar Professional Workflow Solution (hub & all four readers) is backed by a two-year limited warranty. Rigorously tested All Lexar product designs undergo extensive testing in the Lexar Quality Labs, facilities with more than 1, 100 digital devices, to ensure performance, quality, compatibility, & reliability.



...

The cradle mount for the dogcam Bullet HD 2 bullet camera wraps around the camera & provides a mounting point for many other available camera mounts. Requires either curved or flat surface mount to this item. ...

Lexar Adds High-Capacity Storage Drives to its Professional Workflow Line New 512GB & 256GB Storage Drives Quickly Back up & Archive Large Media Files Key Messages: Leverage Super Speed USB (Universal Serial Bus) 3.0 technology to offer read & write speeds of up to 450MB per second & 245MB per second, respectively* Can be used individually or with a Professional Workflow hub for back up of RAW images, high-res photos, & HD, 3D, & 4K video Include an LED capacity meter to easily see the amount of available storage space Available in 512GB & 256GB capacities Quick facts about Workflow line of products: Transfers & backs up images & video from multiple memory cards at once. Leverages Thunderbolt™ 2 or USB (Universal Serial Bus) 3.0 technologies for high-speed transfer & backup of RAW images, high-res photos, & HD, 3D, & 4K video. Readers support today’s latest card formats: SDHC™/SDXC™ UHS-I & UHS-II, Compact Flash® UDMA 7, XQD™, CFast™ 2.0 (Thunderbolt 2 or USB (Universal Serial Bus) 3.0), & micro SDHC™/micro SDXC™ UHS-I. USB (Universal Serial Bus) 3.0 storage drives provide 256GB or 512GB of storage. Innovative, modular design. Use the readers & storage drives with a hub or on the go. ...

KODAK EKTACOLOR Chemicals are designed for processing all Kodak color negative papers. KODAK EKTACOLOR Chemicals are superior or competitive. Low replenishment rates not only lower your chemical costs; they mean less chemical mixing & lower labor costs. They also mean less environmental impact, because the volume of effluent is reduced. ...

Phottix Pro Easy Up HD Umbrella Octa Softbox with Grid 80

Features: All fiberglass spokes for high durability

...

Phottix Pro Easy Up HD Umbrella Softbox with Grid 60x 90cm

Features: All fiberglass spokes for high durability

...

Phottix Pro Easy Up HD Umbrella Softbox with Grid 70x 70cm

Features: All fiberglass spokes for high durability

...