Phottix Mitros+ Odin Combo for Nikon Quick facts: • Built-In Odin • Transmitter/ Receiver • Compatible with manufacturer TTL • Guide Number: 190' at ISO 100 & 105mm • Zoom Range: 24-105mm (14mm with Panel) • Tilts from -7° to +90° • Rotates Left & Right 180° • Wireless Master/ Slave TTL Functionality • Recycle Time: 0.1-5 Seconds • High-Speed, 1st & 2nd Curtain Sync • Runs on 4 AA Batteries" The Mitros+ TTL Flash & Odin Flash Trigger Combo for Nikon Cameras from Phottix is a versatile kit that pairs a full-size Nikon compatible on-camera flash with a wireless transmitter able to trigger & control TTL & manual flash exposure on up to 3 groups of flash units from distances up to 328'. The Mitros+ TTL Flash is a powerful unit with Nikon i-TTL functionality. The Mitros+ features a guide number of 190' at ISO 100 & a zoom range of 24 to 105mm. Besides receiving radio signals, the Mitros+ can also transmit them to other units via its built-in transmitter. The Odin TCU TTL Flash Trigger is a wireless transmitter that runs on the 2. 4 GHz frequency, has 4 channels with 3 groups & can fire the Mitros+ or other compatible flash from a distance of 328'. Flashes within each group have +/- 3 EV power compensation in TTL or user-determined power levels in manual mode. The transmitter can also remotely adjust the angle of the flash beam via its zoom button. The Odin is compatible with Phottix Odin Tx, Odin Rx, Strato II Rx, OP Tx (master), OP Rx (slave) & OP (slave) wireless systems. ...

Phottix Mitros+ TTL Transceiver Flash for Canon The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one. A flash with Phottix Odin Transmitter & Receiver, & Strato receiver all built in.

Features: GN: 58 Canon-Compatible TTL Flash Built-in: Phottix Odin Transmitter & Receiver, & Strato II Receiver Optical Slave Canon-compatible Master/ Slave IR Triggering Modes ETTL I/II, Manual & Multi Stroboscopic Modes High Speed Sync & Second Curtain Sync AF Assist Light Flash Zoom: 24-105mm External Battery Port, 3.5mm Sync Port Quick Flash Mode The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one. What’s the + ? + Built-in Odin Transmitter + Built-in Odin Receiver + Built-in Strato Receiver + Memory Functions The Phottix Mitros is a powerful & durable hot shoe flash that has proven popular since it’s release earlier this year. The Phottix Mitros+ adds significant functionality, allowing photographers to not only use the Mitros on or off camera for lighting, but to also control & trigger remote flash by radio signal. The Mitros+ is an industry landmark & was developed with input from wedding & event photographers. Use the Mitros+ on-camera as a key or fill light, as well as control & trigger other Mitros+ flashes or compatible flashes using Phottix Odin Receivers. The Mitros+ also offers a built-in Phottix Odin Receiver & Strato II Receiver. Existing Phottix triggers, like the Phottix Odin or Strato II can be used to trigger the Mitros+ without extra receivers. Odin Functionality With the Phottix Odin’s functionality built-in the Mitros+ can be used to trigger Phottix Odin & Strato Receivers. Likewise: you can also trigger the Mitros+ using a Phottix Odin TCU or Strato II Multi Transmitter. Using the Mitros+ in Odin Transmitter Mode provides the same functions found on the Phottix Odin, including: Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments
- 18 different levels) Remote power control in Manual Mode: Full power to 1/128 in 1/3 stop increments. Mix TTL & Manual flash – fire some groups in TTL, others as manual. Remote power control in A:B ratio modes with +/- EV adjustments. High speed sync – shutter speeds up to 1/8000 sec. Second curtain sync functions. Remote flash head zoom adjustments – auto or manual The Mitros+ will control & trigger other Mitros+ flashes in receiver mode or Phottix Odin Receivers. Like the Phottix Odin, the Mitros+ with a backlit LCD, is intuitive, & easy to use & underst&. Strato Functionality The Mitros+ has a built-in Strato II Multi-compatible receiver. Existing Strato II Multi transmitter can trigger the Mitros+. The Mitros+ can also trigger Strato II Multi & Strato I Receivers when set in Odin Transmit Mode. Memory Functions New with the Mitros+, built-in three location memory save & retrieval functions. Flash set up & custom function information can be saved in the Mitros+’s memory & be quickly recalled when needed. Use the Mitros+ in different modes for different situations? Quickly recall saved set-ups for fast use.


...

Phottix Mitros+ TTL Transceiver Flash for Nikon The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one. A flash with Phottix Odin Transmitter & Receiver, & Strato receiver all built in.

Features: GN: 58 Nikon-Compatible TTL Flash Built-in: Phottix Odin Transmitter & Receiver, & Strato II Receiver Optical Slave Nikon-compatible Master/ Slave IR Triggering Modes TTL, Manual & Multi Stroboscopic Modes High Speed Sync & Second Curtain Sync AF Assist Light Flash Zoom: 24-105mm External Battery Port, 3.5mm Sync Port Quick Flash Mode The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one. What’s the + ? + Built-in Odin Transmitter + Built-in Odin Receiver + Built-in Strato Receiver + Memory Functions The Phottix Mitros is a powerful & durable hot shoe flash that has proven popular since it’s release earlier this year. The Phottix Mitros+ adds significant functionality, allowing photographers to not only use the Mitros on or off camera for lighting, but to also control & trigger remote flash by radio signal. The Mitros+ is an industry landmark & was developed with input from wedding & event photographers. Use the Mitros+ on-camera as a key or fill light, as well as control & trigger other Mitros+ flashes or compatible flashes using Phottix Odin Receivers. The Mitros+ also offers a built-in Phottix Odin Receiver & Strato II Receiver. Existing Phottix triggers, like the Phottix Odin or Strato II can be used to trigger the Mitros+ without extra receivers. Odin Functionality With the Phottix Odin’s functionality built-in the Mitros+ can be used to trigger Phottix Odin & Strato Receivers. Likewise: you can also trigger the Mitros+ using a Phottix Odin TCU or Strato II Multi Transmitter. Using the Mitros+ in Odin Transmitter Mode provides the same functions found on the Phottix Odin, including: Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments
- 18 different levels) Remote power control in Manual Mode: Full power to 1/128 in 1/3 stop increments. Mix TTL & Manual flash – fire some groups in TTL, others as manual. Remote power control in A:B ratio modes with +/- EV adjustments. High speed sync – shutter speeds up to 1/8000 sec. Second curtain sync functions. Remote flash head zoom adjustments – auto or manual The Mitros+ will control & trigger other Mitros+ flashes in receiver mode or Phottix Odin Receivers. Like the Phottix Odin, the Mitros+ with a backlit LCD, is intuitive, & easy to use & underst&. Strato Functionality The Mitros+ has a built-in Strato II Multi-compatible receiver. Existing Strato II Multi transmitter can trigger the Mitros+. The Mitros+ can also trigger Strato II Multi & Strato I Receivers when set in Odin Transmit Mode. Memory Functions New with the Mitros+, built-in three location memory save & retrieval functions. Flash set up & custom function information can be saved in the Mitros+’s memory & be quickly recalled when needed. Use the Mitros+ in different modes for different situations? Quickly recall saved set-ups for fast use.


...

Phottix Mitros+ TTL Transceiver Flash for Nikon Kit The Mitros+ Kit

Includes:: a Phottix Reflective Studio

...

Manfrotto MK055XPRO3 Tripod & XPRO Ball Head With 200PL Plate This 055 kit comprises a 055XPRO3 3-section aluminium tripod & a portable, versatile ball head. Both tripod & head have advanced features & excellent build quality. The key feature of this kit is the tripod's 90° centre column mechanism, which allows the column to be extended vertically as normal or horizontally. This makes it an extremely versatile tripod, suitable for a wide range of photography applications. The horizontal column mechanism is housed within the tripod's top casting for compactness, but it is easily & quickly extended whenever you need it. Switching between vertical & horizontal column orientation requires no disassembly, & can even be done with a camera attached. The legs of the tripod are also fast to extend & adjust, thanks to the Quick Power Lock levers that block & unblock each leg section. The special design of the QPL levers allow a stronger & more comfortable single-handed leg lock grip. The sections of each leg on the tripod can be released from their folded position in a single movement. The QPL lever design also offers more powerful locking of each section, making this tripod more stable & rigid than traditional lever design models. Intuitive, ergonomic leg angle selectors allow each leg to be independently & solidly set to any of the preset angles, afford considerably greater positioning freedom. A bubble level is built in to the top of the centre column for precise framing. The bubble level rotates freely around the centre column, so it can be positioned wherever it's easiest for you to see while you adjust the tripod & without it either being obscured by the mounted head & camera. The tripod’s top casting has an Easy Link connector to support a photo or video accessory (such as an LED light, flash, reflector, or other piece of equipment) on an extending arm or bracket, & transforming it into a practical mobile studio. The new XPRO Ball Head is the perfect union between innovative solutions & design. It has a new triple locking system which guarantees camera position stability, friction control helping the user balance the weight of camera equipment & two levelling bubbles to precisely frame composition. Moreover, its new polymer rings have substituted that unpleasant, messy grease, ensuring smooth, accurate & less jerky camera movement. XPRO Ball Head is portable, lightweight & reliable thanks to its magnesium body & comes with the Manfrotto 200 pl plate. The 055XPRO3 & the MHXPRO-BHQ2 head are made in Italy by Manfrotto. ...

The new 190X Aluminum 3 section tripod is also available as a kit with the new XPRO Fluid head with quick-release camera plate. Key

Features: The key feature of the 190X is the ground level adaptor which allows great shooting creativity. Once placed on the top casting & combined with the 4 leg angles, it enables the tripod to reach ultra-low positions. The legs of the 190X tripod are fast to extend & adjust, thanks to the Quick Power Lock levers that block & unblock each leg section. The special design of the QPL levers allows a more comfortable & stronger single-handed grip of the leg locks. From a folded position, the sections of each leg of the tripod can be released in a single movement. The QPL lever design also offers more powerful locking of each section, meaning the tripod is more stable & rigid than with traditional lever designs. Intuitive & ergonomic leg angle selectors allow each leg to be independently & solidly set to any of the pre-set angles, allowing even greater positioning freedom. The top casting of the 190X has an Easy Link connector to support a photo or video accessory (such as a LED light, flash, reflector, or other piece of equipment) on an extending arm or bracket, turning the tripod into a practical mobile studio. The new XPRO fluid head is the best choice for photographers wanting to start shooting videos to expand their creativity. Thanks to its body in Aluminium & in Adapto polymer, it is compact, portable & lightweight, weighing a mere 0.7 kg. The XPRO Fluid head has 2 levels of fluidity to switch between hard & soft fluidity according to the kind of movement preferred & to the kind of gear in use. The quick release system is used to accommodate the 200PL plate so there is no need to use different plates when switching from photo to video. The 190X & the MHXPRO-2W head are made in Italy by Manfrotto.

...

The new 190 aluminium 3-section tripod is also available as a kit with the MHXPRO-3W X-PRO 3-Way Head with quick release camera plate. Key

Features: The key feature of the 190XPRO3 is its 90° centre column mechanism, which allows the column to be extended vertically as normal, or horizontally to open up a wide range of framing & shooting possibilities; this makes the 190XPRO3 an extremely versatile tripod, suitable for a wide range of photography & video applications. The horizontal column mechanism is housed within the tripod's top casting for compactness, but it is easily & quickly extended whenever you need it. Switching between vertical & horizontal column orientation requires no disassembly, & can even be done with a camera attached. The legs of the 190XPRO3 tripod are also fast to extend & adjust, thanks to the Quick Power Lock levers that block & unblock each leg section. The special design of the QPL levers allows a more single-handed opening of all leg sections in one action. QPL’s lever design also offers more powerful locking of each section, meaning the tripod is more stable & rigid than with traditional lever designs. Intuitive & ergonomic leg angle selectors allow each leg to be independently & solidly set to any of the preset angles, again allowing considerable positioning freedom. A bubble level is built in to the top of the centre column for precise framing. The bubble level rotates freely around the centre column, so it can be positioned wherever it's easiest for you to see it while adjusting the tripod, & without it either being obscured by the mounted head & camera, or getting in the way of head or camera controls. The top casting of the 190XPRO3 has an Easy Link connector for supporting a photo or video accessory (such as an LED light, flash, reflector, or other piece of equipment) on an extending arm or bracket, & making the tripod into a practical mobile studio. The X-PRO 3-Way Head has retractable levers which make it ultra-compact, & also features new friction controls on the portrait & tilt axes, to help balance the weight of camera equipment so that fine framing adjustments can be made with the locking knobs open, only locking everything down once the shot is ready. The 190XPRO3 & the X-PRO 3-Way Head are made in Italy by Manfrotto.

...

Manfrotto MK190XPRO3 Tripod & XPRO Ball Head With 200PL Plate This 190 kit comprises a compact 190XPRO3 3-section aluminium tripod & a portable, versatile ball head. Both tripod & head have advanced features & excellent build quality. The key feature of this kit is the tripod's 90° centre column mechanism, which allows the column to be extended vertically as normal or horizontally. This makes it an extremely versatile tripod, suitable for a wide range of photography applications. The horizontal column mechanism is housed within the tripod's top casting for compactness, but it is easily & quickly extended whenever you need it. Switching between vertical & horizontal column orientation requires no disassembly, & can even be done with a camera attached. The legs of the tripod are also fast to extend & adjust, thanks to the Quick Power Lock levers that block & unblock each leg section. The special design of the QPL levers allow a stronger & more comfortable single-handed leg lock grip. The sections of each leg on the tripod can be released from their folded position in a single movement. The QPL lever design also offers more powerful locking of each section, making this tripod more stable & rigid than traditional lever design models. Intuitive, ergonomic leg angle selectors allow each leg to be independently & solidly set to any of the preset angles, afford considerably greater positioning freedom. A bubble level is built in to the top of the centre column for precise framing. The bubble level rotates freely around the centre column, so it can be positioned wherever it's easiest for you to see while you adjust the tripod & without it either being obscured by the mounted head & camera. The tripod’s top casting has an Easy Link connector to support a photo or video accessory (such as an LED light, flash, reflector, or other piece of equipment) on an extending arm or bracket, & transforming it into a practical mobile studio. The new XPRO Ball Head is the perfect union between innovative solutions & design. It has a new triple locking system which guarantees camera position stability, friction control helping the user balance the weight of camera equipment & two levelling bubbles to precisely frame composition. Moreover, its new polymer rings have substituted that unpleasant, messy grease, ensuring smooth, accurate & less jerky camera movement. XPRO Ball Head is portable, lightweight & reliable thanks to its magnesium body & comes with the Manfrotto 200 pl plate. The 190XPRO3 & the MHXPRO-BHQ2 head are made in Italy by Manfrotto. ...

The new 190 aluminium 4-section tripod is also available as a kit with the X-PRO 3-Way Head MHXPRO-3W
- with quick release camera
...

Manfrotto MK190XPRO4 Tripod & XPRO Ball Head With 200PL Plate This 190 kit comprises a super-compact 190XPRO4 4-section aluminium tripod & a portable, versatile ball head. Both tripod & head possess advanced features & excellent build quality. The key feature of this kit is the tripod's 90° centre column mechanism, which allows the column to be extended vertically as normal or horizontally. This makes it an extremely versatile tripod, suitable for a wide range of photography applications. The horizontal column mechanism is housed within the tripod's top casting for compactness, but it is easily & quickly extended whenever you need it. Switching between vertical & horizontal column orientation requires no disassembly, & can even be done with a camera attached. The legs of the tripod are also fast to extend & adjust, thanks to the Quick Power Lock levers that block & unblock each leg section. The special design of the QPL levers allow a stronger & more comfortable single-handed leg lock grip. The sections of each leg on the tripod can be released from their folded position in a single movement. The QPL lever design also offers more powerful locking of each section, making this tripod more stable & rigid than traditional lever design models. Intuitive, ergonomic leg angle selectors allow each leg to be independently & solidly set to any of the preset angles, afford considerably greater positioning freedom. A bubble level is built in to the top of the centre column for precise framing. The bubble level rotates freely around the centre column, so it can be positioned wherever it's easiest for you to see while you adjust the tripod & without it either being obscured by the mounted head & camera. The tripod’s top casting has an Easy Link connector to support a photo or video accessory (such as an LED light, flash, reflector, or other piece of equipment) on an extending arm or bracket, & transforming it into a practical mobile studio. The new XPRO Ball Head is the perfect union between innovative solutions & design. It has a new triple locking system which guarantees camera position stability, friction control helping the user balance the weight of camera equipment & two levelling bubbles to precisely frame composition. Moreover, its new polymer rings have substituted that unpleasant, messy grease, ensuring smooth, accurate & less jerky camera movement. XPRO Ball Head is portable, lightweight & reliable thanks to its magnesium body & comes with the Manfrotto 200 pl plate. The 190XPRO4 & the MHXPRO-BHQ2 head are made in Italy by Manfrotto. ...