Levelling Tripod With G-Lock And Power Disc

The Leveling tripod is the ideal support for fluid heads. It introduces a new degree of integration between head and tripod: the Leveling tripod sets the camera perfectly horizontal while the fluid head allows pan and tilt movements. Recommended for lenses up to 300mm. Series 2 offers an excellent maximum load capacity and a very good torsional rigidity. Available in 3 and 4-section in standard and eye level heights. Gitzo have introduced a new Anti Leg Rotation system, which means the tripod can be opened in less than 15 seconds. Simply loosen all the twist locks on each leg at the same time, then pull the leg down and tighten the locks individually. The system consists of two pins, one fixed and one manually operated by means of a button, that prevent camera equipment from suddenly
dropping out of the head when the quick release locking knob is released. Extremely useful with heavy equipment, long lenses and spotting scopes. By fine tuning the freedom of movement of the head, friction control makes the head slower and more precise or faster and looser. This feature also helps to make using heavy equipment or long lenses safer. On ball and fluid head models without separate friction controls, slowly adjusting the lock knobs gives similar results. G-Lock is the new Gitzo leg locking system. The locking mechanism has been completely redesigned in order to achieve a 20% increase in rigidity, faster operation and stronger, safer locking. G-Lock’s special design also provides a “gravity lock” effect: the higher the load applied vertically to the leg, the
stronger the lock. GROUND LEVEL SET - This new feature allows you to remove the center column to save weight and get the camera closer to the ground. Uses existing components: the upper disc with reversible 1/4 - 3/8 bolt and the column hook assembly: Remove column and fix the disk directly to the upper casting using the column hook. No tools needed. HOOK - This built-in accessory allows you to hang a stabilizingweight (e.g. a full camera bag or a sand/water bag) fromthe bottom of the tripod center column. Useful with longheavy lenses, on uneven ground or in windy conditions. All tripods and monopods in Series 1 and above are provided with removable rubber feet. This feature allows you to easily change worn out rubber feet or to fit other accessories, such as spiked feet or snow/sand
shoes. (4 sections tripods in Series 1 are excluded because the final leg section is too narrow to fit these ends). The new leveling system made of three independent leveling bubbles on the quick release plate and one in the ball stem, always guarantee perfectly leveled images. The problem that affects many high quality heads in the market regarding drift angle is absolutely minimized with an outstanding value of 0, 03°. The center column locking collar above the tripod shoulder makes it easier to adjust the column quickly. Series 1 and above are built with an anti-rotation grooved center column for improved stability. The rapid column can easily be inverted for an alternative shooting angle or low level macro work. Handles can removed and repositioned or rotated in different positions.
This feature greatly increases a head’s versatility and is particularly appreciated by left handed users. Safe Grip is a material that gives a safer lock between your camera and the head plate, preventing the camera from moving or slipping. It is used on quick release plates and in applications where the camera equipment is screwed to the support to reduce pivoting and twisting. Safe Lock is a special techno polymer that maximises locking torque and equipment stabilisation. It is used on the upper discs of tripods and heads, and in applications where the equipment is rotated and screwed onto the support to eliminate micro movements and vibration. When using a ball head, the ability to lock and unlock the panoramic movement independent of front-back or lateral tilt movements is
convenient for panoramic photography and when a high level of control is required.