Konova Slider Core

Features: Slider Dolly for smooth tracking shots The slider dolly allows quiet & smooth

...

Konova Slider Core

Features: Slider Dolly for smooth tracking shots The slider dolly allows quiet & smooth

...

The K6 powering module is the heart of this Sennheiser professional modular microphone system & can be powered either by its internal 'AA' size 1.5 V battery or by 12
- 48 V phantom power. The K6 can be combined with different condenser microphone heads to provide a wide variety of polar patterns. Matt black, anodised scratch-resistant finish. Contains: 1 K6 powering module, 1x MZQ200 microphone clamp, 1x AA battery, & 1x protective carrying case. Switchable bass roll-off filter protects against rumble, handling, pop & wind noise On/off switch with battery test High output, low noise Transformerless balanced output on 3-pin XLR connector
...

The K6P powering module is at the heart of Sennheiser's professional modular condenser microphone system. It is similar to the K6 powering module but is powered by 12
- 48 V phantom power only, for use where battery power is not required (e.g. permanent installations). The K6P can be combined with various microphone heads to produce microphones with a variety of pick-up patterns. Matt black, anodised, scratch-resistant finish. Features Switchable bass roll-off filter protects against rumble, handling, pop & wind noise On/off switch High output, low noise Transformerless balanced output on 3-pin XLR connector Delivery

Includes:: 1 K6P powering module 1 MZQ 200 microphone clamp 1 protective carrying case


...

The stable & smooth takes are the basic elements of the film art. You will find that the photos taken accurately facilitate perception of content correctly & improve values of ultimate version of the movie. It allows you taking both video & photos on it. This slider has a 3 pair of 1/4" & 3/8" screw in the base & it's a perfect instrument for both personal & pro film art. It comes equipped with 2 oil sil for removing dust & water. ...

KODAK Batteries are state-of-the-art, & have always delivered outstanding performance. Now the latest enhancements take KODAK MAX Batteries to a whole new level. Today's cameras & their sophisticated features place far greater demands on camera batteries. That's why Kodak offers KODAK MAX Alkaline Batteries. The Power behind Great Pictures! ...

The Kenro Kenair Clean Air Duster emits a powerful jet to remove dust & other unwanted particles from virtually anything
- computer
...

The Kenro Kenair Clean Air Duster refill emits a powerful jet to remove dust & other unwanted particles from virtually anything
-
...

KENKO KFM-1100 light meter, an easy-to-use, accurate, full-featured h&-held light meter for reading both ambient & flash light. For most people the minimal, clearly marked buttons will make using the meter second nature in very little time. The side of the meter only has 3 buttons, the largest is for taking measurements, the other two set on a rocker are UP/DOWN input buttons for changing F no., shutter speed or ASA/ISO. This simple, easy-to-use ergonomic design feels comfortable in your hand & its logical control layout will please photographers who want to concentrate on the subject, not their equipment. Large, easy to read LCD_displays measurements in F no. format with large numbers in 1/10 stop increments & in more common 1/2 stop increments in a pointer scale across the top of the LCD display. LCD also has a back-light for easy reading in low light situations. The meter is sensitive enough for ambient (existing) light to be measured for a shutter speed range from 30 minutes to 1/8000 of a second. In Cine mode it can be used to read frame-rates of 8 to 128 frames/sec. For measuring flash, the meter has modes to either trigger the flash using a sync-cord or set to non-sync cord for manual flash triggering. The aperture range that can be displayed is from f/1.0 to f/128. Useful in mixed flash/ambient lighting situations, the “ Analyze” function can determine the ratio of ambient to flash light in a scene. This feature is very handy in scenes where a flash is being used to “open up” a shadowed area left by ambient (natural) light. The meters “ Calculation” function can be used to average measurements that have been stored in memory, very useful in reflected light measurements to capture highlight or shadow detail more accurately. The KFM-1100 has two memory “slots” to store previous measurements that can be recalled for reference or for averaging. Just press the “M” button after each reading to store it in memory. If the memory has two readings stored, it will delete the oldest reading to store the current information. ...

Rift Labs Kick
- Full Color Light The KICK camera & video light from Riftlabs is about the size of a mobile phone & so is extremely
...