Remote Flash TTL Control For setups using TTL control of remote Quantum Qflash T5d-R, X5d-R or any Qflash upgraded to a 3d-R, use transceiver FW10W as receiver only. Each remote flash requires its own receiver. Each group can have an unlimited number of Qflash. Each group can be independently turned on an off from the camera position using transmitter FW9T. Camera / Flash Sequencer Wirelessly trigger many professional & semi-professional cameras remotely. Transceiver FW10W has Flash Sequencer function (not available on other Free Xwire devices): For action or fast fashion shoots, you can sequence up to four remote power packs, cameras or flashes. Transceiver FW10W will activate the power packs in sequence, advancing to the next pack with each shot, as fast as 13 frames per second. At the end of the sequence of four, the first pack is automatically triggered again, & so on. One transceiver FW10W is required at camera position, & one Free Xwire receiver FW8R or transceiver FW10W is required at each flash or camera. Wireless Control of Remote Camera Wirelessly trigger many professional & semi-professional cameras from 250-500 ft. (75-150m). Photographer triggers remote camera using a handheld Free Xwire transmitter FW9T or FW10w, sending signal to transceiver FWT10W located at remote camera. Transceiver may be set to "always awake" for fast shooting, or placed in "sleep mode" to prolong battery life up to 500 hours. Extended Range " Repeater" Free Xwire FW10W transceiver can also act as a repeater to extend wireless range by about 250-500 ft. (75-300m) for each FW10W in the "chain" between transmitter & receiver. (Note: for each transceiver in the chain, maximum allowed shutter speed with flash is reduced by half.) Type: Transceiver Zones: 4 Independent Channels: 8 Total wireless combinations: 256 Sync on-camera flash: Y Confirmation signal on Receiver: Y Confirmation signal on Transmitter: Y TTL, Auto & Auto Fill control w/ Qflash: Y Flash sequencer / speed cycler: Y Hot shoe sync: Optional FW11/12 PC & two-prong Flash terminals: Optional FW11 Camera always awake function for fast shooting: Y Camera protected from high voltage sync: Y ...

Totally cordless, the FW7Q mounts the flash to a Qflash 4d or 5d, & requires no batteries. Mount an FW9T or FW10/10w transmitter & FW12 Hot Shoe Adapter to the camera & be totally wireless. You can also add a D or Dw series QTTL adapter between the FW9T Transmitter & the camera & transmit your camera's f/stop, ISO, & TTL exposure information to the remote Qflash 5d. ...

Receiver FW8R
- Use this receiver with any shoe, handle mount flash or Qflash asa wireless flash sync. When connected to a Qflash
...

The frio™ is the world’s best coldshoe. The frio™ is the only universal hotshoe adaptor with patent-pending Dual Lock™ security in the world. The frio™ is essential to securely connect all your favourite hotshoe gear to anything with a 1/4?-20 tripod stud – tripods, stands, rigs & grip. Whatever you fit to your frio™ stays there, but comes off in an instant when you want it to. Safe & secure so you can get the shot. The frio™ mounts your flash & hotshoe gear safely anywhere, every time™. No fiddling, no squinting, no tumbles. We call it Slip’n’ Click™ technology. Custom developed for you. Don’t trust your expensive flashes, monitors, microphones & more on anything else. Connect, Combine, Create™ with the frio™! Your frio™ connects your hotshoe flash quickly to your tripod, lightst&, rig & grip gear. Once safely on, your gear is secure thanks to patent-pending Dual Lock security, but can be removed in an instant. Your frio’s™ universal cold shoe design means that it gets along with all your favourite equipment like photo flashes including the Nikon SB900, not forgetting video DSLR microphones, light panels, monitors, recorders & more. No risky gaffer tape home mods required to ensure a secure connection ever again. The frio™ is the only coldshoe adaptor in the world that has the added security of a dual lock mechanism, so the gear you love the most (the expensive stuff) is safely secured to any lightst&, tripod, rig or grip that you’ve got. Dual Lock™ security Safe & secure Slip’n’ Click™ technology ...

Mount your flash & hotshoe gear instantly to your tripod & lightstands, thanks to new Dual Lock security. Best. Coldshoe. Ever? Says who? With more than 40, 000 frios sold worldwide, it’s the only coldshoe with Dual Lock™ to keep your gear safe, & Dual Thread™ to mount it to anything! Your frio™ connects your hotshoe flash quickly to your tripod, lightst&, rig & grip gear. Once safely on, your gear is secure thanks to patent-pending Dual Lock™ security, but can be removed in an instant. My frio™ is Sociable Your frio’s™ universal cold shoe design means that it gets along with all your favourite equipment like photo flashes including the Nikon SB900, not forgetting video DSLR microphones, light panels, monitors, recorders & more. No risky gaffer tape home mods required to ensure a secure connection ever again. My frio™ has got my back The frio™ is the only coldshoe adaptor in the world that has the added security of a double locking mechanism, so the gear you love the most (the expensive stuff) is safely secured to any lightst&, tripod, rig or grip that you’ve got. Does my frio™ like being tied up? Your frio™ has a handy lanyard point to hang your radio slaves & any other accessory from. Your frio™ checks out the internet when you’re not looking. I have dreams about my frio™ that I am ashamed to confess. So do we! Your itsy-bitsy frio™ is totally pocketable, light weight & warm to the touch. To fit perfectly in your pocket, designer clutch or wizard’s pouch. Want to wear your profession or hobby out in public ? A frio™ on your key ring & see the red carpet rolled out for you. ...

This unique accessory combines two types of direct light modifiers: a diffuser with a 1/8" (3.2mm) 30° grid. The net result when mounted onto the front of the 15" (38cm) Soft-Lite Reflector (after first removing the diffuser cone) is a central pool of bright light surrounded by a large area of softer light, ideal for enhancing portraits or products. The grid can be removed, for greater contrast, & replaced with other 7" (17.8cm) grids. Bowens light control reflectors feature bayonet-type mounts for quick, positive mounting & removal on  Bowens Series-2 & Traveller Flash Heads. These innovative accessories offer studio & location photographers alike a comprehensive system of tools to handle any lighting situation they are likely to encounter. ...

Mamiya 58mm Front Lens Cap. ...

Mamiya 67mm Front Lens Cap. ...

Mamiya 72mm Front Lens Cap. ...

Mamiya 77mm Front Lens Cap. ...