Expo Imaging Flat Hat Lighting Kit for Collapsible Drone Pads
- Ice Blue Light up your Flat Hat Drone Pad for low-light flying
...

Westcott Flex 10x 10 Daylight LED Kit Featuring a flexible construction, the Westcott Flex LED is the dream technology for filmmakers & photographers. The Flex is constructed with a moldable frame that is a mere ¼” thick. Acting as both a modifier & a light source in one, this compact unit can be bent to shape output in anyway imaginable. Weighing under 7 ounces, this 1’ x 1’ LED mat can be mounted in any space imaginable, concealing its location in the studio & on-set. For even more versatility, each Flex LED mat is rainproof with an IP 64 rating, giving you the ability to shoot on-location in the rain, near pools, or on ultra-humid days without worry. Despite its compact form, the Flex boasts an impressive amount of output with minimal draw. Drawing only 55 watts of power, the 1’ x 1’ Daylight Flex outputs an impressive 1900 lux at 1 meter. This output is not only powerful, but near perfect with a 5600K color temperature & a high 95 CRI. This ensures that skin tones & colors will be true-to-life in your images for less post-production editing. This high-quality output is dimmable from 0% to 100% for precise control with the included dimmer. The Flex dimmer features a smooth control dial & sleek digital displays for adjusting both output & color temperature. The X-Bracket Mount features an easy-to-use mounting clip, light stand adapter, & easily attachable bracket, & adjustable diffusion arms. This mounting system easily mounts the Flex to stands, chairs, tables, or shelves & simultaneously positions the diffusion panel. The included 16’ waterproof extension cable adds even more convenience, allowing filmmakers & photographers to place their light source in hard to reach locations while still maintaining access to the Flex’s sleek digital dimmer. ...

The Chrosziel AC-206-30 Flex Gear Ring is designed to function with their line of camera follow focuses with a pitch of 0.8. The flexible focus gear ring has an adjustable diameter between ø60-120mm for an angle rotation of about 270-320°. The ring can be attached & removed quickly & easily. ...

Flexible arm, diameter: 13mm, 55cm long with hexagon stud to fit Super Clamp 035 with 3/8'' female thread & 16mm stud with 1/4'' male thread type 18.    ...

The KODAK FLEXICOLOR Developer Replenisher LORR has low replenishment rates that help reduce developer effluent discharge by as much as 50 percent. Lower replenishment rates mean less chemical mixing & lower cost per roll of film processed. ...

The Flextight X1 model should serve most photographers’ needs. Quality is unsurpassed, it is fast & it can take care of most kinds of originals. &, as with any other scanner in this family, it is easy to use. 6300 dpi is more than you need in most cases & even though you can find scanners with higher optical resolution you will not find better clarity & detail rendition when scanning photographic film. This is due to the electronic handling of the sensor, the mechanical precision as well as the quality of filters & the resolving power of the Rodenstock lens. The Flextight X1 is an unusually efficient scanner that will carry out most tasks quickly & easily. the easy to mount Flex Holder system produces a very high throughput. As the electronics run at a low frequency, no Peltier cooling device is needed. With the Flex Holder system you either mount several originals in one holder or a film strip of 4 or 6 images. In that way you can utilize the advanced batch scanning capabilities scanning up to 6 images in one go. Alternatively, you can utilize the unique 3F scanning feature. If you mount a film strip & press the 3F auto scan button the scanner will automatically detect & crop each image & save it with different names. The images are scanned in a specific resolution at 16 bit per colour. In this way the full range of the original is extracted from the scan. the 3F file is never altered but will act as a "preview scan" when you open it later & you can re-do all operations & change whatever parameter you like. this is exactly like re-scanning but without the film original present. ...

The Flextight X5 is the top model in the Flextight scanner series providing the best of all worlds. Ease of use, incomparable quality, unique, batch-scanning facilities all packed in a classical & characteristic design. The very high quality Kodak CCD is an 8000+ pix sensor. Even though you can find scanners with larger sensors you will not find better clarity & detail rendition when scanning photographic film. That is due to the electronic handling of the sensor, the mechanical precision as well as the quality of filters & the resolving power of the Rodenstock lens. Running the electronics at this speed demands a great deal from the internal design & is also a challenge in terms of heat generation. Therefore the Flextight X5 scanners are equipped with a Peltier cooling device on the CCD itself. In this way heat is controlled which avoids compromising the quality of the scans. The scanner is equipped with a light condenser eliminating the effect of small dust particles, which are normally invisible unless you zoom 100% into your image. They can be the most annoying & time-consuming part of scanning but the are removed without losing speed or quality. in addition, you can add the flex Touch dust removal feature which will remove dust & small scratches without having any impact on the sharpness at all. by attaching the Batch or slide feeder, it is now possible to set up an automatic scanning workflow. The Batch Feeder allows up to 60 originals to be scanned unattended. the Batch Feeder can take most kinds of transparencies & they are automatically recognised & scanned according to pre-defined specifications. the Feeder holds up to 50 slides, which can be scanned in one batch. The files produced can either be final TIFF files cropped & corrected or saved as raw 3F files, which can be opened & corrected just as if they were initial scans. When selecting the 3F file format as automatic scan mode the images are scanned in a specified resolution at 16 bits per colour. In this way the full range of the original is extracted from the scan, The 3F file is never altered but will act as a "preview scan" when you open it later & you can re-do all operations & change what-ever parameter you like. This is exactly like re-scanning but without the film original present. Furthermore
- every time you save a file from the 3F format the history of your decisions is embedded inside the 3F file, which will enable you to repeat whatever you have been doing whenever you like.
...

Use the Flex TT5 Transceiver with the Mini TT1 Transmitter to control single or multiple off-camera electronic or intelligent i-TTL / CLS Speedlights. You can now place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight & in bright sunlight. The Mini TT1 & Flex TT5 are compatible with any Pocket Wizard radio for triggering manual flash or remote cameras. Control TL™ Pocket Wizard’s newest firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capability through our proven radio system. Control TL allows remote i-TTL for Nikon CLS / i-TTL systems as well as Manual Power Control. Control TL firmware is configurable & upgradeable for “future-proof” continuous improvement. Dedicated CLS / i-TTL Triggering Locking your Flex TT5 Transceiver into the hot shoe of a Nikon DSLR camera, & mounting CLS / i-TTL flashes onto Flex TT5 Transceivers gives you full flash exposure control with the freedom & reliability of a Pocket Wizard radio. There are no special settings to make or modes to call up. Use the camera’s exposure compensation controls for basic control of remote flashes, or add an AC3 Zone Controller or Nikon Master unit for even more flexibility. Manual Power Control Adjust the manual power settings of your remote Nikon Speedlights directly from a SB-800, SB-900 flash or Pocket Wizard AC3 Zone Controller mounted on your on-camera Flex TT5. Working with a Nikon SB-800, SB-900 or AC3 in the shoe of the Flex TT5, you can independently control the power output of up to three remote groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting. Now you can work with total control with your remote lights, without leaving your shooting position. Nikon SU-800 Wireless Speedlight Commander may also be used. Zone Select The Flex TT5 Transceiver has an A-B-C zone select switch to allow use with the remote groups/zones found on on the Pocket Wizard AC3 Zone Controller or Nikon flashes. Zones allow you to control single or groups of lights independently from other lights in different zones. These zones can also be used with a Muilti MAX thus allowing you to pair a single Multi MAX radio on camera with Flex TT5's Transceivers on your remote flashes & utilize many of the Multi MAX's advance trigger functions. Hyper Sync™ Our patent pending Hyper Sync technology allows photographers to achieve faster X-sync speeds, sometimes up to 1/8000 of a second, with full power flash. Now you can cut the ambient light & use wide-open apertures, outdoors in bright sunlight. Hyper Sync automatically adjusts the timing of your flash trigger so that faster than X-sync speeds can be achieved. With certain Canon camera & flash combinations, you can achieve sync all the way to 1/8000th of a second. Just imagine what you can do using flash in bright sun with wide open apertures & fast shutter speeds. Since Hyper Sync is a trigger function you can use any Pocket Wizard Receiver including the Flex TT5, Plus II or Multi MAX. Hyper Sync works with both TTL speedlites & full size studio flash. Please visit https://wiki.pocketwizard.com/hyper Syncfor configuring Hyper Sync. While performance varies by the camera & flash equipment being used, Hyper Sync will get the maximum possible out of any set-up. Hyper Sync™ Automation With Control TL Firmware Update 3.0 (Nikon) & 6.0 (Canon), configuring Hyper Sync has now been automated. Hyper Sync Automation adjusts Hyper Sync timing in two separate places – on the transmitter & on the receiving Control TL radio. The transmitting or on-camera Mini TT1 or Flex TT5 automatically adjusts Hyper Sync to compensate for changes made to shutter speed. Photographers can further refine Hyper Sync via the Pocket Wizard Utility. For more information on Configuring Hyper Sync Automation, visit the Hyper Sync section of the Pocket Wizard Wiki. High Speed Sync / FP When Hyper Sync can’t keep up, FP/ High Speed Sync takes over for Speedlight flash photography all the way to 1/8000. Use this feature to shoot wide open in bright sun for amazing results. Control TL optimizes this amazing feature by shortening the flash burst to the precise amount needed resulting in faster recycling times & more flashes per battery set when shooting in Nikon's HSS/FP Flash mode. High Speed Sync (HSS / FP Sync) Disable Mode Select either HSS Sync or Hyper Sync™ at shutter speeds above x-sync. This means that you can use Hyper Sync & the benefit of full power flash all the way up to 1/8000 with certain flash systems. Rear Curtain Sync Precise rear curtain sync capability is engaged using the camera's sync settings. Capture natural light trails with sharp exposures at the end – no “after trails!” Pre-Flash Boost Nikon flashes use a dual preflash system to calculate i-TTL exposure values. In many TTL situations, including shooting in full sun, over long distance or using diffusers or bounce flash, the normal pre-flash is simply not enough for the camera to see. Pocket Wizard's Pre-Flash Boost increases your remote Nikon flashes first preflash by three stops &, if necessary, the second preflash by one stop. The boost level can also be adjusted at the flash if necessary. Power Tracking When working with the Power ST4, Power MC2 & AC9/ Flex TT5 paired with compatible manual flashes, you can change any of your settings on your camera & the system adjusts for those changes. Change your exposure compensation to adjust the exposure or make adjustments in aperture or ISO & the system balances your flash for proper exposure. Basic Trigger Mode Allows the Flex TT5 to work as a transmitter on ANY camera it will fit. Pocket Wizard Compatible The Mini TT1 sends out two trigger signals; one on the new Control TL channels, & another on the same channels as all standard trigger Pocket Wizard radios, so they will work with any unit you may already have. Pocket Wizard Utility
- Programmable & Upgradeable Use the supplied Pocket Wizard Utility software with the on-board USB (Universal Serial Bus) port to program the Flex TT5 to any Pocket Wizard channel & zone as well as many other custom settings. The Flex TT5 can be upgraded whenever updates & feature enhancements are available (many planned!). Auto-Sensing Transceiver Technology Pocket Wizard's Auto-Sensing Transceiver Technology enables the Flex TT5 Transceiver to switch back & forth between Transmitter & Receiver modes as needed for greater flexibility on the job. All Pocket Wizard Transceivers default to Reciever mode. When a hot shoe or other trigger is detected, it automatically switches to Transmitter mode. Auto-Relay Mode Easily trigger a remote camera in sync with distant remote flashes with Auto-Relay Mode. Put a camera where you can't be & have remote TTL or manual lighting at the same time. Expand your coverage & increase your creativity. Channels / Learn Mode The Flex TT5 has two channel configuration settings; C1 & C2. Each can be programmed as needed with up to 20 Control TL channels* for TTL photography or Manual Power Control, or 32 standard channels** for manual flash photography. Channels can be configured with the Pocket Wizard utility or use the Learn function to quickly program channels, or the reset function to configure back to factory settings.*- 20 Control TL channels for FCC/IC 344 MHz radios & three Control TL channels for CE 433 MHz radios.**
- 32 Standard channels for FCC/IC 344 MHz radios & 35 Standard channels for CE 433 MHz radios. Zone Control Add the AC3 Zone Controller on top of your Flex TT5 & gain three zones of power control right from the camera’s position. Works in both auto/CLS/i-TTL & manual. Shut down an entire zone with the flick of a switch.AC3 Zone Controller sold separately. Speed Cycler with an AC3 Zone Controller Previously only seen with Pocket Wizard’s Multi MAX radios, this new mode is designed to rapidly cycle through multiple flash units fired individually in sequence. This allows photographers to fire a camera in sync with flashes faster than a single flash unit can recycle. It can also be used for triggering remote cameras sequentially. Speed Cycler is engaged on a transmitting Mini TT1 or Flex TT5 via the Pocket Wizard Utility. Speed Cycler mode requires an AC3 Zone Controller in the top hot-shoe of the on-camera Pocket Wizard radio. Zones A, B, & C will be triggered sequentially & individual zones can be disabled by setting the AC3’s Zone Switch to the off position. Both TTL & manual flash controls are supported. Flash Power Control without a Camera Photographers can now take their AC3 & transmitting radio off-camera & use it to set power levels for any flash with a Control TL receiver, making it more convenient to use an optically triggered light meter, or control the power levels with just a Mini TT1/ Flex TT5 & AC3 in their hand while another photographer takes the pictures. Previously, an AC3 Zone Controller on a Mini TT1 or Flex TT5 needed to be on camera to send manual power levels to remote flashes. Now, when connected to a Mini TT1 or Flex TT5, manual power levels are transmitted to remote flashes when the TEST button is pressed even when the transmitter is off the camera. This affects both speedlights connected to receiving Flex TT5s & larger flashes like Alien Bees & Elinchrom RX units with Control TL receivers. Camera/ Flash Ports The Flex TT5 Transceiver has two plug-in ports for use with remote CLS / i-TTL cameras & other flash units, including studio strobes. With its auto-relay function, the Flex TT5 can trigger a remote camera & transmit to a remote strobe. Continuous Fast FPS Never before have you been able to shoot remote CLS / i-TTL non-stop in continuous high-speed mode. Fill the buffer! Nothing else comes close. Low-Profile Design The Flex TT5 lies flat, stays out of the way & features a flip-up antenna for additional range when needed. Auto Trigger Select for Control TL The hot shoe on both the Mini TT1 & Flex TT5 will trigger just about any hot shoe flash placed into it in addition to the Nikon Speedlight's it is designed for. Yes, you can now fire just about any hot shoe flash including Vivatar, Canon, etc., in manual mode only & not TTL mode. (max trigger voltage < 50V, use P2 port for up to 200V) Built-in Hot Shoe Lock your Canon flash into the Flex TT5’s dedicated hot shoe & combine your remote flash with on-camera flash or use the on-camera flash for additional CLS / i-TTL or Manual Power Control only. The metal & glass reinforced resin hot shoe assembly is a superstructure onto itself & incredibly durable. The best part; no more cords. Continuous Remote Camera Triggering This allows for triggering a continuous motor drive burst of a camera connected to the P1 port on a remote Flex TT5. Transmit Only Mode This prevents an incoming trigger signal firing your on-camera Flex TT5 & flash, in situations where multiple photographers are using the same set of remote Pocket Wizard radios.

...

Pocket Wizard Flex TT5 Transceiver for Canon The dedicated Flex TT5 Transceiver, with its built in hot-shoe & Control TL firmware, is the perfect addition to Canon E-TTL II flash systems.  The Flex TT5 takes the existing benefits of Canon wireless systems beyond the boundaries of infrared technology.  When paired with the Mini TT1 Transmitter or another Flex TT5 Transceiver, a whole new world of wireless flash freedom opens up.  The Flex TT5 is also the perfect Transceiver for your manual triggering needs & works with all Multi MAX channels & many of the Multi MAX advanced functions. The Flex TT5’s simple design comes to life through its hot-shoe connection with a camera or flash.  Mount a flash or command unit on the Flex TT5 to use the same zone controls & ratio commands as you would normally.  The system tracks your changes in ISO, shutter speed & aperture & reacts accordingly to make sure exposures stay right on target.   Use the flash compensation dial on your camera or flash just as you would normally & the changes pass seamlessly through the system. The Flex TT5 has two channel configuration settings; C1 & C2.  Each can be programmed as needed with up to 20 Control TL channels for TTL photography, or 32 standard channels for manual flash photography.  The Flex TT5 Transceiver also has a three-zone selector switch for ease of use with Canon zones & ratios. With Pocket Wizard Hyper Sync Technology, the Flex TT5 can precisely advance the timing of your flash trigger so that increased flash sync speeds, up to 1/500th of a second is achievable with many strobes. Need more speed?  Push your Control TL system beyond 1/500th & go into FP/ High-Speed sync mode automatically.  Simply change your shutter speed to get flash sync all the way to 1/8000th.   No buttons to press or settings to change! A Pocket Wizard Utility program is provided to support the Flex TT5 Transceiver via a USB (Universal Serial Bus) port.  The Utility means that you can configure your channel settings, dial in your Hyper Sync timing, adjust your sleep-mode timers as well as update your product to the latest firmware. The Flex TT5 also has our Auto-Sensing Transceiver Technology that enables it to switch back & forth between Transmitter & Receiver modes as needed for greater flexibility on the job. When a hot-shoe or other trigger is detected, it automatically switches to Transmitter mode.   With Auto Relay Mode you can easily trigger a remote camera in sync with remote flash.  Put a camera where you can’t be & use remote TTL or non-TTL lighting at the same time.  Expand your coverage & increase your creativity.

Features: Control TL:  Pocket Wizard’s new firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capabilities through our proven radio system, beginning with remote TTL for Canon E-TTL II systems.   Control TL firmware is configurable & upgradeable for “future-proof” continuous improvement. Dedicated E-TTL II Flash Triggering:  As soon as you lock the Flex TT5 into E-TTL II flashes & pair with a Canon digital camera with another Flex TT5 or Mini TT1 mounted in the hot-shoe, you have full E-TTL II autoflash exposure control with the freedom & reliability of a Pocket Wizard radio.  There are no special settings to make or modes to call up.  Use the camera, on-camera flash or flash commander controls for flash compensation, zone & ratio control. Auto-Sensing Transceiver Technology: Pocket Wizard’s Auto-Sensing Transceiver Technology enables the Flex TT5 Transceiver to switch back & forth between Transmitter & Receiver modes as needed for greater flexibility on the job. All Pocket Wizard Transceivers default to Receiver mode. When a hot-shoe or other trigger is detected, it automatically switches to Transmitter mode. Auto-Relay Mode: Easily trigger a remote camera in sync with a distant remote flashes with Auto-Relay Mode.  Put a camera where you can’t be & have remote TTL or non-TTL lighting at the same time.  Expand your coverage & increase your creativity. Power Tracking:  When working in E-TTL II you can change any of your control settings on your flash or camera & the system adjusts for those changes.  Change your flash compensation to adjust the exposure or make adjustments in shutter speed, aperture or ISO & the system balances your flash for proper exposure. Eight Frames per Second:  Never before have you been able to shoot remote E-TTL II at this speed.  Nothing else comes close. Hyper Sync:  Digital cameras compute & communicate prior to the shutter opening.  By utilizing this time the Mini TT1 can precisely fire flashes early to increase your X-sync speed up to 1/500th of a second. FP/ High Speed Sync:  Need more speed?  Push beyond 1/500th & go into FP/ High-Speed sync mode automatically with E-TTL II flashes.  No buttons to press or settings to change other then your shutter speed will give you flash sync all the way to 1/8000th.  Built-in Hot Shoe:  Lock your Canon flash into the Flex TT5’s dedicated hot shoe & combine your remote flash with on-camera flash or use the on-camera flash for additional E-TTL II control only.  The metal & glass reinforced resin hot shoe assembly is a superstructure onto itself & incredibly durable.  The best part; no more cords.
Includes:: Flex TT5 Transceiver for Canon USB (Universal Serial Bus) cable Two (2) AA batteries Quick Guide


...

As the name already suggests, the FLEXX Touring Set is primarily adapted to the needs of those photographers & videographers who mainly work outdoors. Consisting of six individual products, which can be combined with each other in the most different configurations, the FLEXX Touring Set guarantees a multitude of possible applications both outdoors & in the studio. The greatest advantage of the FLEXX Touring Set is the high number of different applications. Secure fastening on smooth surfaces like glass or polished surfaces is guaranteed by the suction pod CS33. The rigid aluminium multi clamp CC60 with four different 1/4 inch connection threads offers perfect hold for perfect photos both outdoors & in the studio. The anodised aluminium earth spike, combined with the camera plate & the ball head CROSS CB5.1, is the ideal tool for the nature photographer. The compact tripod NANOMAX 200T is especially designed for photographers who like to travel with a backpack. Its small packing dimension of only 28cm cm allows to stow this tripod easily & quickly in the backpack. The products can be safely stored in a high-quality transport bag which is specifically designed for the contents of the FLEXX Touring Set. The FLEXX Touring Set as well as all other FLEXX products come with a 10 year warranty after you have registered your product. The advantages: 6-piece FLEXX Touring Set with practical products especially for outdoor use, but also for use in the studio Sturdy storage bag for safe & comfortable transport Rigid, practical & small
- the ideal photo & video accessories for outdoor use Unlimited number of setup variants through compatibility of all FLEXX products Stable multi clamp CC60 made from aluminium die-cast with 60 mm clamping distance & four 1/4 inch connection threads Anodised aluminium earth spike for outdoor macro photography close to the ground In combination with or without the ball head CROSS CB5.1 the suction pod CS33 guarantees a secure hold for unusual perspectives NANOMAX 200T – the perfect tripod for your backpack. Small packing dimension, stable design, low weight & maximum flexibility Compatible with products of external manufacturers with standard 1/4 inch connection thread 10 year warranty
...