Manfrotto 16mm 3/8 Female to 5/8 Male Adapter. ...

Softie Windshield A robust & proctical windhsield (70mm in diametre) performing as well as a standard windshield (without windjammer) The softie alone provides a fast, flexible & cost effective solution for ENG on camera microphones. Constructed of an acoustic foam base covered by a specially designed synthetic fur fabri together with a seperate shockmount with it's own bracket & either pistol grip handle or boom adapter. 30mm long fur, giving protection up to 25db wind noise reduction. Available in a large range of sizes to fit most popular microphones. The main component of the Softie mount is a one piece rubber (actual

Material: EPDM) diaphragm shockmount. This unit is extremely robust, & has been tested in all environment conditions to ensure it performs. The Softie Mount comes in three sizes, depending on which microphone being used. Small Hole 19-20mm diameter Medium Hole 21-22mm diameter Large Hole 24-25mm diameter The mounts are 58mm diameter x 56mm long, & support short to medium length shotgun microphones. Please use the " Quick Product Finder" to see what size you need for your mic. The Softie mount will only fit shotgun microphones, which are cylindrical in shape (the same diameter though their whole length). We can not mount microphones that taper, with the Softie mount. The longest Softie Windshields we make have an internal bore of 32cm (12-1/2")
- Example:AKG CK68 or Audio Technica AT815b. These are the longest microphones we would recomend using a Softie Mount for, simply because the mount is flexible & can not support longer mics. For longer mics, we would only recomend a Full Windshield System, & a Modular suspension. The Softie Mount, used with the Softie Windshield provides a fast, flexible & cost effective solution for ENG on camera microphones This system will allow the user to either hold the mount with the pistol grip handle. Or attach it to a boom pole using the 3/8" Whitworth threaded insert in the base of the handle. This gives a very robust mounting system, which will be suitable for most situations.


...

Softie Windshield A robust & proctical windhsield (70mm in diametre) performing as well as a standard windshield (without windjammer) The softie alone provides a fast, flexible & cost effective solution for ENG on camera microphones. Constructed of an acoustic foam base covered by a specially designed synthetic fur fabri together with a seperate shockmount with it's own bracket & either pistol grip handle or boom adapter. 30mm long fur, giving protection up to 25db wind noise reduction. Available in a large range of sizes to fit most popular microphones. The main component of the Softie mount is a one piece rubber (actual

Material: EPDM) diaphragm shockmount. This unit is extremely robust, & has been tested in all environment conditions to ensure it performs. The Softie Mount comes in three sizes, depending on which microphone being used. Small Hole 19-20mm diameter Medium Hole 21-22mm diameter Large Hole 24-25mm diameter The mounts are 58mm diameter x 56mm long, & support short to medium length shotgun microphones. Please use the " Quick Product Finder" to see what size you need for your mic. The Softie mount will only fit shotgun microphones, which are cylindrical in shape (the same diameter though their whole length). We can not mount microphones that taper, with the Softie mount. The longest Softie Windshields we make have an internal bore of 32cm (12-1/2")
- Example:AKG CK68 or Audio Technica AT815b. These are the longest microphones we would recomend using a Softie Mount for, simply because the mount is flexible & can not support longer mics. For longer mics, we would only recomend a Full Windshield System, & a Modular suspension. The Softie Mount, used with the Softie Windshield provides a fast, flexible & cost effective solution for ENG on camera microphones This system will allow the user to either hold the mount with the pistol grip handle. Or attach it to a boom pole using the 3/8" Whitworth threaded insert in the base of the handle. This gives a very robust mounting system, which will be suitable for most situations.


...

Zeiss 18mm f 2.8 Batis Lens
- Sony E Mount The ZEISS Batis autofocus lenses were specially developed for mirrorless full-frame
...

Fujifilm 18mm Lens Hood Cap For use with the XF18mm f/2 R Lens. Push on design. ...

The 18x 50IS AW is unique among high-magnification binoculars because they incorporate Canon's remarkable Optical Image Stabilizer technology. Proven highly effective in Canon video camcorders & professional lenses, this revolutionary system employs a novel Vari-Angle Prism that instantly & continuously makes adjustments to maintain a steady image. With Canon's Optical Image Stabilizer, you can enjoy the resolving power of these binoculars without a tripod. You can even use them from within moving vehicles. Their shake-free performance not only enhances your ability to view fine detail but also reduces eye strain & fatigue. The IS series feature eyepiece lenses with a unique Doublet Field Flattener, which dramatically reduces curvature of field. As a result, there is none of the image distortion & blurring at the periphery typical of high-magnification binoculars. This advanced design also results in long eye relief, which enables eyeglass wearers to view the entire field without vignetting. Canon's superior optical engineering also provides unusually wide apparent field-of view. This is particularly important in high-magnification binoculars as it makes it easier to locate your desired subject. ...

Manfrotto 190 GO! Aluminium 4 Section Kit With 3 Way Head Quick facts: 90° column system lets to shoot from new perspectives Twist Lock allows effortless fast set up & increases lightness New Leg Angle Selector allows to have smooth operations The Easy Link allows to add accessories to the tripod as LED New 804 Adapto 3 Way head ideal for precise framing on all 3 axes The 190 go! completes the advanced hobbyist & professional offering with a more compact & easy to transport version of the successful 190 XPRO. Combined with the new 804 Mark II 3 way head, it delivers compactness & reliability together with great precision & tilt motion assistance. br> The new twist locks allow the easy opening & closure of all sections at once with a single h&, making it ultra-fast to operate the tripod. Twist locks occupy less space compared to a lever, making the tripod light & compact. The 90°column mechanism is hidden inside the tripod’s top casting until it’s needed; the mechanism can then be raised with a single finger, allowing the centre column to swing to the horizontal position. Together, the 90°column & the 4 leg angles enable you to get low down to the ground like no other tripod. Taking its lead from our professional equipment lines, an Easy Link attachment in the top casting turns the tripod into a mobile studio & allows it to hold a LED light, reflector or other accessory. This kit comprises the Manfrotto’s most compact, precise & reliable 804 Mark II 3-way photographic head. Constructed of ultra durable & lightweight technical polymer, the new 804 is now even compact thanks to the new retractable levers, with ergonomics handle provided with rubber. The new patented 804 has a unique spring feature to assist in the tilt motion of the head to compensate for heavier, off-centre loads. Moreover the standard quick release plate fits snugly in the low-profile receiver. The 190 go! is made in Italy by Manfrotto.   ...

Manfrotto 190 GO! Aluminium 4 Section Kit With Ball Head Quick facts: 90° column system lets to shoot from new perspectives Twist Lock allows effortless fast set up & increases lightness New Leg Angle Selector allows to have smooth operations The Easy Link allows to add accessories to the tripod as LED Center Ball head ideal for fast action & quick framing The 190 go! completes the advanced hobbyist & professional offering with a more compact & easy to transport version of the successful 190 XPRO. Combined with the successful 496RC2 ball head it delivers compactness & reliability together with high shooting versatility & quick framing. The new twist locks allow the easy opening & closure of all sections at once with a single h&, making it ultra-fast to operate the tripod. Twist locks occupy less space compared to a lever, making the tripod light & compact. The 90°column mechanism is hidden inside the tripod’s top casting until it’s needed; the mechanism can then be raised with a single finger, allowing the centre column to swing to the horizontal position. Together, the 90°column & the 4 leg angles enable you to get low down to the ground like no other tripod. Taking its lead from our professional equipment lines, an Easy Link attachment in the top casting turns the tripod into a mobile studio & allows it to hold a LED light, reflector or other accessory. This kit comprises the extremely portable, lightweight & reliable 496RC2 Ball head. It gives the kit high shooting versatility & very quick framing ensuring excellent images quality thanks to the aluminium body. The 190 go! is made in Italy by Manfrotto. ...

Manfrotto 190 GO! Carbon 4 Section Kit With 3 Way Head Quick facts: 90° column system lets to shoot from new perspectives Twist Lock allows effortless fast set up & increases lightness New Leg Angle Selector allows to have smooth operations The Easy Link allows to add accessories to the tripod as LED New 804 Adapto 3 Way head ideal for precise framing on all 3 axes The 190 go! completes the advanced hobbyist & professional offering with a more compact & easy to transport version of the successful 190 XPRO. In its carbon fiber version, & with the new 804 Mark II 3 way head, it delivers maximum rigidity & lightness combined with great precision & tilt motion assistance. The new twist locks allow the easy opening & closure of all sections at once with a single h&, making it ultra-fast to operate the tripod. Twist locks occupy less space compared to a lever, making the tripod light & compact. The 90°column mechanism is hidden inside the tripod’s top casting until it’s needed; the mechanism can then be raised with a single finger, allowing the centre column to swing to the horizontal position. Together, the 90°column & the 4 leg angles enable you to get low down to the ground like no other tripod. Taking its lead from our professional equipment lines, an Easy Link attachment in the top casting turns the tripod into a mobile studio & allows it to hold a LED light, reflector or other accessory. This kit comprises the Manfrotto’s most compact, precise & reliable 804 Mark II 3-way photographic head. Constructed of ultra durable & lightweight technical polymer, the new 804 is now even compact thanks to the new retractable levers, with ergonomics handle provided with rubber. The new patented 804 has a unique spring feature to assist in the tilt motion of the head to compensate for heavier, off-centre loads. Moreover the standard quick release plate fits snugly in the low-profile receiver. The 190 go! is made in Italy by Manfrotto.   ...

Manfrotto 190 GO! Carbon Fibre 4 Section Tripod Legs Only Quick facts: 90° column system lets to shoot from new perspectives Twist Lock allows effortless fast set up & increases lightness The carbon fiber legs guarantee lightness ensuring rigidity The Easy Link allows to add accessories to the tripod as LED New Leg Angle Selector allows to have smooth operations The 190 go! completes the advanced hobbyist & professional offering with a more compact & easy to transport version of the successful 190 tripod. In its carbon fiber version, delivers maximum rigidity combined with the lightest components. The new twist locks allow the easy opening & closure of all sections at once with a single hand movement, making it ultra-fast to operate the tripod. Twist locks occupy less space compared to a lever, making the tripod light & compact. The 90°column mechanism is hidden inside the tripod’s top casting until it is needed; the mechanism can then be raised with a single finger, allowing the centre column to swing to the horizontal position. Together, the 90°column & the 4 leg angles enable you to get low down to the ground like no other tripod. Taking its lead from our professional equipment lines, an Easy Link attachment in the top casting turns the tripod into a mobile studio & allows it to hold a LED light, reflector or other accessory. The 190 go! is made in Italy by Manfrotto. ...