The DR-60D MKII is a compact 4-track audio recorder for dedicated use with a digital single-lens reflex (DSLR) or digital single-lens mirrorless (DSLM) camera as a video system. It can be mounted directly to the camera & offers various audio inputs & outputs to allow the recording of high-resolution audio material in parallel to, but separated from the camera & its video data. The recorder features Tascam original HDDA microphone preamps which are known for high S/N ratio, low input-referred noise & low distortion. Recordings can be made at 44.1/48/96 k Hz, 16/24-bit in WAV or BWF format. In addition to ordinary stereo recording, it is possible to record up to four channels simultaneously which can then be mixed down to a stereo signal. Recording levels can be adjusted independently for inputs 1, 2 & 3–4 & the Dual Recording function allows two files to be recorded in parallel at different levels. The DR-60D MKII can output high-quality audio to a DSLR/DSLM camera to be recorded there as a reference track, & a camera input enables convenient monitoring of audio sent from a DSLR camera. Mid-side decoding, slate tone functions (automatic/manual), selectable time delay & other functions for convenient recording are also available. Main

Features: Compact, high-quality audio recorder designed to be used in combination with a DSLR camera Uses an SD/SDHC card as recording medium High-quality recording inputs through Tascam original High Definition Discrete Architecture (HDDA) microphone preamps In addition to ordinary stereo recording, simultaneous recording of up to four channels is possible Four channels can be mixed down to a stereo signal Recording levels can be adjusted independently for inputs 1, 2 & 3–4 Dual recording function allows two files to be recorded simultaneously at different levels Recording at 44.1/48/96 k Hz, 16/24-bit, linear PCM (WAV format) Broadcast Wave Format (BWF) supported as WAV recording format New, smooth XLR/TRS combo jacks XLR mic/line inputs can provide phantom power (+24V/+48V) TRS mic/line inputs support +24 d Bu input when used as line inputs "HI+PLUS" setting allows a maximum input gain of 64 d B Stereo mini jack input supports mics that require plug-in power, allowing the input of video mics & other high-output mics (+10 d BV maximum input level) Low-cut filter conveniently reduces low-frequency noise (40 Hz, 80 Hz, 120 Hz) High-quality audio can be output to a DSLR camera for recording Two camera outputs with different levels allow audio signal to be sent to a line or mic input of the camera Camera input enables convenient monitoring of audio from a DSLR camera Selectable mid-side decoding for use with MS microphone setups Slate tone functions (automatic/manual) to simplify synchronization with video files when editing Pre-recording function allows the unit to record the two seconds of sound before recording is activated Auto recording function to start start & stop recording by input level A new file can be created during recording (manually or by file size) Self-timer function to start recording after a set period of time Jump-back function allows the last several seconds of the currently played file to be replayed again by simply pressing a button Selectable delay to eliminate time lags caused by differences in the distances of two input sources QUICK button allows easy access to various functions Divide function allows files to be split where desired Mark function convenient for moving to specific locations Equalizers for playback, & level alignment function to enhance the perceived overall sound pressure File name format can be set to use a user-defined word or the date Resume function to memorize the playback position before the unit is turned off Line output & headphones output with individual level controls (3.5-mm jack) 128 x 64 pixel LC display with backlight USB (Universal Serial Bus) 2.0 port Stand adapter (¼ inch) on bottom side to attach the unit to a tripod DSLR bracket for easy camera attachment & removal with a coin Dedicated remote control jack (for use with RC-10 & RC-3F (sold separately)) Hold switch to prevent accidental operation Handles on the front left & right sides protect the screen & can be used to attach a shoulder belt Operates on four AA batteries, an AC adaptor (sold separately: TASCAM PS-P515U), external battery pack (sold separately: TASCAM BP-6AA) or USB (Universal Serial Bus) bus power Power source switches automatically from external to internal when necessary (with pop-up message on display)

...

Canon DR-E18 DC Coupler The Canon DR-18 DC Coupler means that you can run continuous power to your Canon EOS 750D or EOS 760D DSLR. ...

Canon DR-E19 DC Coupler The DR-E19 DC Coupler for use with the Canon EOS 1D X Mark II SLR Digital Camera. Combine wuth the AC Adapter AC-E19 to power your camera using mains electricity, instead of battery power. ...

The Canon DR-E6 DC Coupler is used in conjunction with the AC Adapter AC-E6 (sold separately) to connect your Canon 5D Mark II camera to a standard household power outlet.   ...

No model likes to change their clothes on 5th Avenue or on a busy beach full of onlookers. In the city or on a busy beach, the mobile Dress Tube change room protects models from curious glances. The Dress Tube is barely larger than a Frisbee when collapsed & expands into a spacious change room in a fraction of a second. Even for large & powerful models. ...

Drobo: The Most Advanced 4-Bay Drobo Ever This third generation of the Drobo is more affordable than ever & features a completely new architecture making it more than 3x faster than the previous generation. More impressive, rebuild times are 4x faster delivering maximum data availability in the event of a drive failure. With the inclusion of battery backup technology, Drobo provides even more data protection in the face of an unplanned power outage. The latest generation of the Drobo 4-bay holds true to the unique design & simplicity that has made Drobo the best desktop storage solution for storing & protection all your data. No storage expertise is required to ensure your data is always safe & protected. Best of all your Drobo will be ultra quiet & look great on your desk. Enhanced Backup for Time Machine Time Machine & Drobo: A Perfect Pairing Apple’s Time Machine was designed to make backing up your files simple & painless. Pairing Time Machine with Drobo improves your data protection by ensuring your data is safe in the event of hard drive failure. Control How Much Storage Time Machine Uses: Apple’s guidelines are to set the storage space for Time Machine at twice the size of the Mac’s hard drive that is to be protected. Time Machine users know that it will gradually use all available disk space without an easy way to stop this from happening. With Drobo you can easily control the maximum storage space available for Time Machine backups through Drobo Dashboard. When you install a Drobo, Drobo Dashboard prompts to see if you want to create a dedicated storage volume for Time Machine’s use, allowing you to set the size of this volume. Upgrading With the Remarkable Drobo Once you experience how easy it is to use a Drobo you’ll know there is nothing that compares – but that isn’t the only remarkable thing about it. Drobo takes upgradability to the next level. Not only can you upgrade capacity with no downtime by adding new drives or replacing smaller drives with larger ones, you can seamlessly upgrade to a new Drobo by simply removing the disk pack from your current system, & moving it to a new Drobo. Upgrading not only gives you an instant performance boost, but also delivers all the other benefits of the new Drobo. Power Protecting Your Critical Data Drobo doesn’t just protect you from a drive failure, but also from potential data loss after a power outage. In every Drobo we include battery backup technology that protects all data in memory or cache. When power spontaneously goes away, Drobo moves any in flight data to onboard flash in your Drobo so it will be protected & moved to your disk drives once power is restored. This ensures your important information is safe & sound. Even better, your battery recharges itself & is designed to last for the life of you Drobo. ...

Lowepro Drone Guard CS 300 Case Get flexible organization for your quadcopter & drone gear -- including all accessories. The Drone Guard 300 case fits the depth & form factor of the Parrot Bebop, FPV 250 racing drones & similar sized quadcopters & flying cameras. The perfect, out-of-the-box solutions for carrying, organising, storing & protecting your drone gear & all essentials. Further

Details: Designed by serious quadcopter pilots at Lowepro for serious quadcopter pilots. Form Shell™ technology with lightweight, yet sturdy composite-shell construction offers superior protection for gear without adding weight or bulk. A lightly padded backpad

Includes:: attachable backpad straps. Use for treks out to your flying location, or detach & pack away for less bulk or for long-distance travel. Patent-pending Drone Guard system of organisation features flexible dividers & compartments for all large & small accessories. Drone Guard system is easy to customise. Change your flight plan; change your set-up!

Includes:: dedicated storage for blades, props, Go Pro or other action video camera, batteries, cables, chargers, mounts, manuals, etc. Handled & removable storage panel with accessory straps helps to keep small & fragile parts secure & neatly organised. Easy to grab, go & fly. Exclusive, tactical "fractal camo" print on top of case for a rugged & unique aesthetic. Sturdy grab handle. Ideal for storing in the boot of a car for transporting or in a garage, closet or workshop for an organized storage option.





...

Lowepro Drone Guard CS 400 Case Get flexible organisation for your quadcopter & drone gear -- including all accessories. The Drone Guard 400 case fits the depth & form factor of the DJI Phantom, 3DR Solo & similar sized drones, quadcopters & flying cameras. The perfect, out-of-the-box solutions for carrying, organising, storing & protecting your drone gear & all essentials. Further

Details: Designed by serious quadcopter pilots at Lowepro for serious quadcopter pilots. Form Shell™ technology with lightweight, yet sturdy composite-shell construction offers superior protection for gear without adding weight or bulk. A lightly padded backpad

Includes:: attachable backpad straps. Use for treks out to your flying location, or detach & pack away for less bulk or for long-distance travel. Patent-pending Drone Guard system of organisation features flexible dividers & compartments for all large & small accessories. Drone Guard system is easy to customise. Change your flight plan; change your set-up!

Includes:: dedicated storage for blades, props, Go Pro or other action video camera, batteries, cables, chargers, mounts, manuals, etc. Handled & removable storage panel with accessory straps helps to keep small & fragile parts secure & neatly organised. Easy to grab, go & fly. Exclusive, tactical "fractal camo" print on top of case for a rugged & unique aesthetic. Sturdy grab handle. Ideal for storing in the boot of car for transporting or in a garage, closet or workshop for an organised storage option.





...

The most aggressive film in the Hot Press line, Dry Mount Film Clear is coated with an acrylic-based tacky adhesive. Especially recommended for wood, plastics & canvas, this adhesive will bond well to any highly textured or very smooth surface. ...

Outdoor photographers & watersport enthusiasts who document their adventures will appreciate this lightweight, technical & durable design that keep camera & personal gear high & dry. Lightweight, technical, waterproof fabric with an IPX-6 rating offers splashproof protection from heavy seas; tested against high-pressure water stream from any angle. Roll-top, wide-mouth opening provides full & easy access to gear. Removable, fully padded, adjustable camera case with taped seams enables the easy transfer of photo gear for other carrying options & provides redundant weather protection when placed in backpack/duffle. Ease-of-use design details, such as side-release buckles & ergonomic grab handles & zipper pulls, enhance active use. Perforated, EVA backpad & shoulder straps provide lightweight, durable & breathable comfort; adjust strap position for ideal fit at torso Laser-cut tool loops & lash points offer convenient attachments for trekking poles and/or tripod.   ...