Kenko Colour Meter KCM-3100 Knowing the colour temperature of a light source is extremely important for consistently accurate colour reproduction in photography. Reproducing accurate colour is critical in many areas of photography such as fashion & commercial photography. Useful for both still & cine photography, the KCM-3100‘s uncluttered control button layout & large easy-to-read LCD makes it very user friendly. Three display modes display colour temperatures, designed for different types of photography & filtering systems. LB (Light Balancing) LB index is used to select the necessary amber or blue LB filter. The Mired difference between the specific photographic colour temperature for the selected film type & the light source. CC (Colour-Correction) displays the Kodak filter number (s) of the necessary light-balancing filter (s) to make for easy selection of the required light balancing filter. Where as the LB system uses Amber or blue filters, the CC system uses Magenta or Green colour compensating filters. Photographic colour temperature in degrees Kelvin. This is a useful setting to determine filtration based on the light source & the spectral sensitivity of the film used. The ability to take ambient & flash light readings using either a sync cord or non-cord. Using a sync cord, the flash is fired when the reading button is pushed. In the non sync cord mode, pushing the reading button puts the meter in a st&-by mode & when the flash is fired the meter displays those readings. “ Analyser Mode” for measurement of flash lighting only. Setting the shutter speed to “F”, the meter will only read light from flash. 9 memory channels for customizing the meter to your equipment & materials- All film & equipment manufacturers claim that their products are calibrated or balanced to “daylight” (5500K) or tungsten (3400K or 3200K), but in the real world these number are often not 100% accurate. Film can vary from batch to batch & light bulbs & flash tubes can have slight shifts in colour over time. Once these differences are determined, The KCM-3100’s 9 memory channels allow the photographer to enter custom setting based on the situations or individual film characteristics they are working with. Once the data is entered & stored, the meter will adjust future readings accordingly. ...

Versatile clamp designed to work in conjunction with removable tripod columns of between 25 to 28mm diameter such as the 055 & 190 series tripods. The Column Clamp can be securely fixed to solid surfaces or bars up to 55 mm width. The column with head clamp range
- max. (round tube): 55.00 mm

Colour: Black

Material: Aluminum weight: 0.44kg




...

Black aluminium post: diameter: 35mm. Height of light fixture: from ground level to 250cm. Complete with braked wheels. 1 levelling leg. attachment number: type 1 + spigot art.013 female attachment type closed length: 121.00 cm

Colour: Black column cross section: round column tube diameter: 35mm footprint max diameter: 100.00 cm leg cross section: rectangular levelling leg: 1 number load capacity: 8kg load capacity at maximum extension at 6" inclination: 2.00kg

Material: aluminum maximum

Height: 250.00 cm minimum

Height: 35.00 cm section centre column: 1 number weight: 6.40kg







...

To take one 8 x 6 landscape rectangle for a group photograph with name slip aperture & one 7 x 5 oval aperture for individual photo. 50 Mounts per box ...

A light stand & a boom, all in one! The Boom Stand is a 3 riser compact stand that can be rapidly converted into a stand with boom arm. The pivoting collar on the stand allows the top two extensions to be tilted for use as a telescopic boom arm. Supplied with a refillable counterweight for maximum stability. Attachment: 5/8" receiver & 5/8" stud with 1/4-20" & 3/8" threaded tips. ...

Additional receivers enable you to trigger multiple flash units & studio lights simultaneously. A short, 150mm, studio Light Cable attaches the Combi TF receiver to the studio light. Canon Receiver Part No. 1000 768.0 ...

Additional receivers enable you to trigger multiple flash units & studio lights simultaneously. A short, 150mm, studio Light Cable attaches the Combi TF receiver to the studio light. Nikon Receiver Part No. 1000 768.1 ...

Aluminium st&. Supplied with sandbag counterweight (empty) for maximum stability & smoothness. Legs & column in steel, last two sections in aluminium. attachment number: type 25 + spigot art. 013 attachment type closed length: 113.00 cm

Colour: Silver column cross section: round column tube diameter: 35.30.25.20mm counterweight: 35.00kg footprint max diameter: 109.00 cm leg cross section: round load capacity: 12kg load capacity at maximum extension: 5.00kg load capacity at maximum extension at 6" inclination: 1.50kg

Material: steel base + silver anodised aluminium sections maximum extension: 191 maximum

Height: 392.00 cm minimum extension: 19 minimum

Height: 131.00 cm risers stand number: 3 number section centre column: 4 number stand leg

Size: Ø22mm suggested wheels: 018 weight: 5.60kg









...

Soft padded album with Wedding Blocked Vertically down right hand side Available in Black & Ivory Available in 10x 10 & 8x 8 format ...

The essential accessory for Landscape, Sports & Nature Photographers! Finding yourself on location for long periods of time knowing the shot you want maybe hours away can result in back-ache, sore knees & joint problems, thankfully the Walkstool offers a comfortable solution. The Walkstool's telescopic legs offer 2 sitting positions
- low with the legs retracted & normal sitting height with the legs extended.  It folds away into its own carry case & will fit in with the rest of your kit when you are on the move.  Choose from 3 different height sizes.
...