Calumet's Background Paper has a high-quality, fine-tooth nonreflecting surface that enhances your photography. Just add a background stand & these rolls instantly become sweeps. We make an extra effort to make sure your background paper arrives safely. Each roll is wound on a tough, rigid core for extra support & wrapped in a plastic sleeve to trap out moisture & dirt. It ships in a sturdy tube for maximum protection during transport. Note: While every effort was made to ensure accurate colour reproduction of the products shown here, some variances may occur on screen. ...

Calumet's Background Paper has a high-quality, fine-tooth nonreflecting surface that enhances your photography. Just add a background stand & these rolls instantly become sweeps. We make an extra effort to make sure your background paper arrives safely. Calumet Background Paper is wrapped in a plastic sleeve to trap out moisture & dirt, then packed in a sturdy tube or carton for maximum protection during shipping. Note: While every effort was made to ensure accurate colour reproduction of the products shown here, some variances may occur on screen. ...

Peak Design Clutch Camera Hand Strap The world’s first camera hand strap that is quick-connecting & quick-adjusting. Clutch gives you access to your camera’s controls but quickly cinches down when you need security. Hypalon exterior, microfiber pad & aluminum adjuster hardware is ultra-durable & inspired by high-end climbing gear.

Features: Works with any DSLR Compatible with any DSLR (or SLR) camera, including large full-frame bodies & cameras with battery grips. Quick-adjusting Cinch down on your hand for total security, or pull to loosen when accessing camera controls. Quick-connecting Attaches quickly with our Anchor Link connection system. Use with Capture Works st&-alone or with the Capture Camera Clip. Tripod compatible Compatible with most ARCA-type tripod heads. Small & sleek Low-profile & unobtrusive compared to other camera hand straps on the market. Thoughtful aesthetics Made from premium materials & custom hardware inspired by high-end climbing gear. Super strong Strong enough to hold any pro camera/lens/accessory combo. Hypalon Construction Clutch's exterior shell is made from the same material that whitewater rafts are made from. Microfiber Pad Never gets sweaty or sticky against your h&. Nobody likes a sweaty h&. Dyneema Anchors Newly upgraded Dynemma-corded Anchors can each hold well over 90kg (200lbs.) & feature best-in-class abrasion resistance.  

...

Pocket Wizard CM-E3-ACC Pre-Trigger Remote Cable This is a special remote shutter release cable called a Pre-Trigger Cable. A Pre-Trigger cable controls both the half-press & full-press function of your remote camera’s shutter release. When a camera is “pre-triggered”, it is like holding your camera’s shutter release button in the half-pressed or metering/focusing position. This –ACC cable allows a compatible Pocket Wizard radio to independently control both half-press & full-press functions. Added bonus: All CM-E3-ACC cables shipped into the market starting July/ August 2013 include a MSMM Adapter (stereo to mono miniphone) which converts a CM-E3-ACC cable to a standard CM-E3 miniphone cable. This change coincides with the introduction of our new retail packaging. All cables are now packaged in a environmental friendly cardboard box with rececyled white labels showing both ends of the cable as well as compatibility list. This replaces our old packaging of a zipped bag packaging.A Standard Cable (CM-E3) works with most Pocket Wizard radios but has no half-press control, & is for basic remote triggering only. (Using a CM-E3-ACC cable with a MSMM Adapter will provide the same function as a CM-E3 cable.) A Pre-Release or Pre-Trigger (–P) Cable (CM-E3-P) works with most Pocket Wizard radios. This pre-trigger cable has a switch that means that you can toggle half-press on or off at the camera position, but not remotely. (Using a CM-E3-ACC cable with a PTMM Adapter will provide the same function as a CM-E3-P cable.) ...

Pocket Wizard CM-E3-ACC-1 Pre-Trigger Remote Cable This is a special remote shutter release cable called a Pre-Trigger Cable. A Pre-Trigger cable controls both the half-press & full-press function of your remote camera’s shutter release. When a camera is “pre-triggered”, it is like holding your camera’s shutter release button in the half-pressed or metering/focusing position. This –ACC cable allows a compatible Pocket Wizard radio to independently control both half-press & full-press functions. Added bonus: All CM-E3-ACC cables shipped into the market starting July/ August 2013 include a MSMM Adapter (stereo to mono miniphone) which converts a CM-E3-ACC cable to a standard CM-E3 miniphone cable. This change coincides with the introduction of our new retail packaging. All cables are now packaged in a environmental friendly cardboard box with rececyled white labels showing both ends of the cable as well as compatibility list. This replaces our old packaging of a zipped bag packaging.A Standard Cable (CM-E3) works with most Pocket Wizard radios but has no half-press control, & is for basic remote triggering only. (Using a CM-E3-ACC cable with a MSMM Adapter will provide the same function as a CM-E3 cable.) A Pre-Release or Pre-Trigger (–P) Cable (CM-E3-P) works with most Pocket Wizard radios. This pre-trigger cable has a switch that means that you can toggle half-press on or off at the camera position, but not remotely. (Using a CM-E3-ACC cable with a PTMM Adapter will provide the same function as a CM-E3-P cable.) ...

Canon CN E18-80mm T4.4 L IS KAS S Cinema Lens The CN-E 18-80mm T4.4 L IS KAS S is a new compact Cinema EOS lens with cine-servo functionality. This sits below cine-servo lenses & above EF lenses. The ergonomic design supports handheld shooting & is ideal for shooting documentaries, interviews, weddings, indie movies & corporate videos. The lens strengthens Canon’s line of cine-servo lenses, following in the footsteps of the CN7x 17 & CN20x 50. This is a more affordable option compared to our existing cine-servo lenses which tend to be rented out rather than brought whilst maintaining superb IQ & easy operation. The lens

Includes:: a servo engine which is powered via EF mount connectors. For increased versatility, users can use the optional ZSG-C10, a dedicated zoom grip, ideal to be used with hand held rigs. Key

Features: Zoom lens covering 18-80mm focal length Optical zoom of 4.4x Constant Brightness & consistent performance across range T4.4 (equivalent of f/4) Servo & manual operation to suit shooting movies or professional applications Colour balance consistent with EOS Cinema lens series 3 types of image stabilisation Compact size & lightweight 4K superior level of optical performance 9 blade iris for attractive bokeh Minimal focus breathing Detachable servo for shoulder style operation (optional)



...

Canon CN- E135mm T2.2 L F Digital Cinema Prime Lens
- EF Mount The Cinema prime CN-E 135mm T2.2 L F (EF mount) lens offers a compact,
...

Canon CN-E 14mm T3.1 L F Digital Cinema Prime Lens
- EF Mount Part of Canon’s range of EF Cinema prime lenses, the CN-E14mm T3.1
...

Canon CN-E 15.5-47mm T2.8 L S Lens -EF Mount The CN-E15.5-47mm T2.8 L S/SP is a light weight Super 35mm cinematography lens for 2K, & 4K production formats. Available in EF mount (S model) & PL mount (SP model). The compact & lightweight CN-E15.5-47mm T2.8 L S (EF mount) Cinema Zoom Lens rivals best-in-class zoom magnification & wide-angle focal length range for the Super 35mm format, & is engineered to offer superb optical 4K performance for demanding high-end productions, meeting & exceeding industry standards. Intended for the working professional, the CN-E15.5-47mm T2.8 L S lens has markings on angled surfaces & on both sides of the barrel, making it easy to read settings from behind, or from either side of the camera. Focus markings can even be switched from standard labeling to metric, depending on production need. This lens is equipped with control rings designed to maintain the proper amount of resistance with consistent operating torque, & a covered flange-back adjustment mechanism to meet numerous of production application needs. Designed to fulfill contemporary 4K production standards, this phenomenal lens surpasses the performance requirements of any HD imaging system. It features advanced optical design with fluorite & large aspherical lens elements to achieve sharp, consistent images throughout their zoom range. Canon engineers also incorporated geared inner focusing to minimize focus-induced changes in the angle of view, reducing focus breathing virtually to zero. The 11-blade aperture diaphragm ensures smooth out-of-focus areas, while innovative glass construction counteracts barrel expansion & contraction to avoid temperature-induced marking discrepancies. ...

Canon CN-E 15.5-47mm T2.8 L SP Lens
- PL Mount The CN-E15.5-47mm T2.8 L S/SP is a light weight Super 35mm cinematography lens for
...