Product Description The Facings Kingspan Kooltherm K12 Framing Board is faced on bothsides with a low emissivity composite foil facing which is highlyresistant to the transmission of water vapour. This reflective, low emissivity surface can effectively double the thermalresistance of the cavity in which the board is placed. The Core The core of Kingspan Kooltherm K12 Framing Board is apremium performance CFC/HCFC–free rigid phenolic insulantof typical density 35 kg/m 3.CFC/HCFC–free Kingspan Kooltherm K12 Framing Board ismanufactured without the use of CFCs/HCFCs andhas zero Ozone Depletion Potential (ODP). Product Data Standards & Approvals Kingspan Kooltherm K12 Framing Board is manufactured tothe highest standards under a quality control system approvedto BS EN ISO 9001: 2000 (Quality management systems. Requirements). Standard Dimensions Kingspan Kooltherm K12 Framing Board is available in thefollowing standard
Size: Nominal Dimension Availability Length (m) 2.4 Width* (m) 1.2 Insulant Thickness (mm) Refer to local distributoror Kingspan Insulationprice list for current stock andnon–stock sizes.* Kingspan Kooltherm K12 Framing Board is available in other widths subject to quantity. Extended lead times & price premiums will apply. Compressive Strength Typically exceeds 125 k Pa at 10% compression when testedto BS EN 826: 1996 (Thermal insulating products for buildingapplications. Determination of compression behaviour). Water Vapour Resistance Modified to include board facings, the boards achieve aresistance far greater than 100 MN.s/g, when tested inaccordance with BS 4370–2: 1993 (Methods of test for rigidcellular materials. Methods 7 to 9). Where additional vapourcontrol is required an appropriate surface treatment should beapplied over the completed insulated wall area (refer to ‘ Water Vapour Control’). Durability If correctly applied, Kingspan Kooltherm K12 Framing Boardhas an indefinite life. Its durability depends on the supportingstructure & the conditions of its use.