Manthorpe Roll Out Dry Vent Ridge System
- Brown (6m Pack) The Manthorpe Roll-Out Dry Ridge is a mechanically fitted system which securely fixes the ridge tiles onto a roof, protecting them from wind up-lift & rain penetration. The system provides 5, 000mm²/m ventilation to the roof void through the vent roll, the equivalent to a continuous 5mm gap. There is no need for mortar, making the job of fixing the ridge quick, easy & clean, as well as making it possible during frosts & other adverse weather conditions. The system is compatible with most makes of concrete round & angled ridge tiles & most slate, flat concrete & profiled tiles. It can be fitted to the ridge of any duo pitch roof which has a pitch between 15 & 45 degrees. A single box of Manthorpe Dry Ridge provides all of the components required for a ridge run Approx. 6 metres in length (excluding the ridge tiles). The system is available in 2 different colours (Black & Dark Brown) & can be used in conjunction with Manthorpe's Ridge End Caps & both their Linear & Standard Smart Verge systems. The Manthorpe Roll-Out Dry Ridge System has been independently wind tunnel tested by the BRE. Testing complies with the requirements of BS 6399-2: 1997 Code of practice for wind loads. Features One box supplies enough components for a 6m ridge length Compatible with most makes of concrete half-round & angled ridge tiles Can be used on roofs with a pitch of between 15 & 45 degrees The system is compatible with most slate, concrete flat & profiled tiles Provides a 5, 000mm²/m ventilation into the roof space Quick & easy to fix with no special tool requirements No need for mortar, the system can be installed in all weathers & is UV stabilised
Specification Size - 6m Long Materials - (Roll) Vented membrane with an aluminium flashing (Brackets) Galvanized steel (Unions) UV stable polypropylene Colours - Black Brown (Roll) 1 Per Pack (Unions) 13 Per Pack (Brackets) 10 Per Pack