Manthorpe Non-Profile In-line Roof Tile Vent This simple & discreet Manthorpe Non-Profile in-line tile vent
- Antique Red is designed
...

Manthorpe Non-Profile In-line Roof Tile Vent This modestly designed Manthorpe Non-Profile in-line tile vent
- Black is specifically
...

Manthorpe Non-Profile In-line Roof Tile Vent This humble Manthorpe Non-Profile in-line tile vent
- Dark Brown is designed by Manthorpe
...

Manthorpe Non-Profile In-line Roof Tile Vent This subtle Manthorpe Non-Profile In-Line Tile Vent
- Grey is the best answer to rooftop
...

Manthorpe Non-Profile In-line Roof Tile Vent Manthorpe Non-Profile in-line tile vent Terracotta is a convenient & sophisticated answer to rooftop ventilation that was created by the trusted Manthorpe Building products so you can be assured of its quality. This versatile product can be applied in both mechanical extraction & soil stack termination & is very easy to install, after bracing it into position, you can nail it in place & take advantage of the sidelock clips to ensure it's securely fixed. It can even be used alongside tiles from other manufacturers. With 10, 000mm² of free airflow, you can also rest easy that you're getting sufficient ventilation, it even works to remove un-needed water from the vent & onto your rooftop at exactly the same time. Along with a whole range of colours, this Manthorpe Non-Profile in-line tile vent
- Terracotta comes in a bright & summery terracotta shade that simultaneously keeps your vent hidden & makes your roof stand out. The Manthorpe Non-Profile in-line tile ventilator is designed to provide a simple solution to the problems of roof space ventilation & mechanical extraction through a flat tiled roof. The vent is designed to replace a single tile & maintain an unbroken appearance to the roofline whether used at a high or low level.  The tortured path through the 4mm louvred grille & internal weathering geometry are designed to maintain a 10, 000mm² of airflow whilst channelling any water ingress out of the vent & on to the roof covering. Features In-line & discreet low profile design 4mm louvred flyscreen grille Integral sidelock clip to ensure secure fit Range of colours available Profiles suit top all top tile manufacturers Fully independently wind tunnel tested Base outlet feeds directly into roof space Adaptor available for mechanical extraction Suitable for use down to a 20 roof pitch  

Specification Size - 334x 418mm Minimum Pitch - 20° Free Airflow: 10000mm 2 Materials -  (Top) u PVC (Base)  Polypropylene Colours -  Terracotta Slate Grey Dark Brown Antique Red Anthracite Black  4


...

Manthorpe Plain Tile Vent (7000mm² Airflow) Antique Red The Manthorpe in-line plain tile ventilator is designed to provide a quick & simple solution to the problems of roofspace ventilation & mechanical extraction / soil stack termination through a plain tiled roof. The vent is quick & easy to install, taking the place of a 3 plain tiles with no need to cut the battens. The in-line profile helps to maintain an unbroken appearance to the roofline whether used at high or low level. The tortured path through the internal weathering geometry is designed to maintain a constant airflow gap of 7, 000 mm² whilst channelling any water ingress out of the vent & on to the roof covering below, with the 4mm louvred grille & placed to prevent the entry of debris & large nesting insects. Features In-line & discreet low profile design 4mm louvred flyscreen grille No need to cut battens Range of colours available Profile suit all top tile manufacturers Fully independently wind tunnel tested Base outlet feeds directly into roof space Adaptor available for mechanical extraction Suitable for use down to a 35° roof pitch

Specification Size - 331mm x 330mm Minimum Pitch - 35º Maximum Gauge - 88mm Material -  (Top) UPVC (Base)  Polypropylene Colour -  Terracotta Slate Grey Dark Brown Antique Red  6 (Per Pack)

...

Manthorpe Plain Tile Vent (7000mm² Airflow) The Manthorpe in-line plain tile ventilator is designed to provide a quick & simple solution to the problems of roofspace ventilation & mechanical extraction / soil stack termination through a plain tiled roof. The vent is quick & easy to install, taking the place of a 3 plain tiles with no need to cut the battens. The in-line profile helps to maintain an unbroken appearance to the roofline whether used at high or low level. The tortured path through the internal weathering geometry is designed to maintain a constant airflow gap of 7, 000 mm² whilst channelling any water ingress out of the vent & on to the roof covering below, with the 4mm louvred grille & placed to prevent the entry of debris & large nesting insects. Features In-line & discreet low profile design 4mm louvred flyscreen grille No need to cut battens Range of colours available Profile suit all top tile manufacturers Fully independently wind tunnel tested Base outlet feeds directly into roof space Adaptor available for mechanical extraction Suitable for use down to a 35° roof pitch

Specification Size - 331mm x 330mm Minimum Pitch - 35º Maximum Gauge - 88mm Material -  (Top) UPVC (Base)  Polypropylene Colour -  Terracotta Slate Grey Dark Brown Antique Red  6 (Per Pack)

...

Manthorpe Plain Tile Vent (7000mm² Airflow) - Granulated Antique Brown The simplicity of the Manthorpe Plain Tile Vent (7000mm Airflow)
-
...

Manthorpe Plain Tile Vent (7000mm² Airflow)   The Manthorpe Plain Tile Vent (7000mm Airflow)
- Granulated Old Red is the perfect
...

Manthorpe Plain Tile Vent (7000mm² Airflow) - Granulated Sand Red   The Manthorpe Plain Tile Vent (7000mm Airflow)
- Granulated
...