The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit & receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on transferring data & at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data & at 1310nm on receiving data. Another TP-LINK's media converter MC111CS is just one of the examples to cooperate with MC112CS. Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...

The TP-LINK Redundant Power Supply Module TL-MCRP100 is an AC-input & DC-output power supply module. It can convert 100-240V 50/60 Hz input voltage into 9.5VDC output with rated wattage of 102W. The power supply module supports output over-voltage/short circuit/over-current protection. TL-MCRP100 is applicable to 14-Slot Rackmount Chassis TL-MC1400. ...

TP-Link's TL-SM321A adopts the latest standard 1000 Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10 Km with TP-Link's routers, switches, media converters to provide high speed & stability. ...

TP-Link's TL-SM321B adopts the latest standard 1000 Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10 Km with TP-Link's routers, switches, media converters to provide high speed & stability. ...

TP-Links TL-SM321B adopts the latest standard 1000 Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10 Km with TP-Links routers, switches, media converters to provide high speed & stability. ...

TP-Link's TL-SM321B adopts the latest standard 1000 Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10 Km with TP-Link's routers, switches, media converters to provide high speed & stability. ...

TP-Links TL-SM321A adopts the latest standard 1000 Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10 Km with TP-Links routers, switches, media converters to provide high speed & stability. ...

TP-Link's TL-SM321A adopts the latest standard 1000 Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10 Km with TP-Link's routers, switches, media converters to provide high speed & stability. ...

TP-Link's TL-SM321A adopts the latest standard 1000 Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10 Km with TP-Link's routers, switches, media converters to provide high speed & stability. ...

The MC220L is a media converter designed to convert 1000 Base-SX/LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC/LC-Type connector. It works at 850nm on both transmitting & receiving data when adopting multi-mode fiber & 1310nm on both transmitting & receiving data when adopting single-mode. Other features of this module include the ability to be used as a standalone device (no chassis required) or with TP-Links 19"system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers & 10 kilometers when utilizing single-mode fiber. ...