TL-FC111B-20 is a media converter, providing RJ-45 port & SC fiber port, which can convert between electrical & optical signals. & long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring & wireless networking. TL-FC111B-20 adopts WDM (wavelength division multiplexing) technology, helping send & receive data at a distance of up to 20 km (12.4 miles) over only one fiber, which saves half of the cable deployment cost for customers. TL-FC111B-20 transmits data at 1310 nm wavelength & receives data at 1550 nm wavelength on optical fiber. The TL-FC111A-20 works in the other end as a pair by receiving data at a wavelength 1310 nm & sending data at wavelength 1550 nm. ...

The TF-3200 10/100M PCI Network Adapter is a highly integrated & cost-effective Fast Ethernet adapter that provides 32-bit performance, PCI bus controller, & full compliance with IEEE 802.3 10 Base-T, IEEE 802.3u 100 Base-TX specifications & IEEE 802.3x full duplex flow control. The TF-3200 keeps low cost & eliminates usage barriers. It is easy to upgrade a network from 10 Mbps to 100 Mbps. It supports both 10 Mbps & 100 Mbps network speed both in half-duplex & full-duplex transfer modes, using auto-negotiation technology to detect the network speed. It also can be widely used in most modern operating systems. ...

The TP-LINK TF-3239DL Fast Ethernet Adapter is a highly integrated & cost-effective Fast Ethernet Adapter that provides 32-bit performance, PCI bus controller, & full compliance with IEEE 802.3 10 Base-T, IEEE 802.3u 100 Base-TX specifications & IEEE 802.3x Full Duplex Flow. TF-3239DL keeps low cost & eliminates usage barriers. It is the easiest way to upgrade a network from 10 to 100 Mbps. Supports both 10 Mbps & 100 Mbps network speed both in Half-Duplex & Full-Duplex transfer modes, using Auto-Negotiation technology to detect the network speed. It also can be widely used in most modern Operating System. For Windows Me/2000/2003/XP integrates the right driver, TF-3239DL is really a plug-&-play device. ...

The TP-LINK TF-3239DL Fast Ethernet Adapter is a highly integrated & cost-effective Fast Ethernet Adapter that provides 32-bit performance, PCI bus controller, & full compliance with IEEE 802.3 10 Base-T, IEEE 802.3u 100 Base-TX specifications & IEEE 802.3x Full Duplex Flow. TF-3239DL keeps low cost & eliminates usage barriers. It is the easiest way to upgrade a network from 10 to 100 Mbps. Supports both 10 Mbps & 100 Mbps network speed both in Half-Duplex & Full-Duplex transfer modes, using Auto-Negotiation technology to detect the network speed. It also can be widely used in most modern Operating System. For Windows Me/2000/2003/XP integrates the right driver, TF-3239DL is really a plug-&-play device. ...

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINKs 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit & receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1550nm on transferring data & at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data & at 1550nm on receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINKs 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...

The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit & receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on transferring data & at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data & at 1310nm on receiving data. Another TP-LINKs media converter MC111CS is just one of the examples to cooperate with MC112CS. Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...

The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit & receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on transferring data & at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data & at 1310nm on receiving data. Another TP-LINK's media converter MC111CS is just one of the examples to cooperate with MC112CS. Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit & receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1550nm on transferring data & at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data & at 1550nm on receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...