Extend HDMI up to 100ft (30m) over Cat 5e/6 Cabling with Power over Cable to Receiver. The ST121SHD30 HDMI over CAT5e/CAT6 Video Extender kit lets you extend HDMI audio/video & an IR remote control signal by up to 100 feet (30 Meters) over dual Cat 5e or Cat 6 cable. For added versatility this HDMI extender kit is powered via the HDMI bus, & does not require any additional power adapter. With support for High-Definition resolutions of up to 1920x 1080 / 1080p & the accompanying digital audio, this cost-effective HD extender can easily be installed using new or existing Ethernet infrastructure wiring. Plus, because the extender kit does not require a power adapter, you can easily extend an HDMI signal in areas where access to power outlets is limited. The HDMI over Cat 5e/ Cat 6 video extender kit

Includes:: both the local transmitter & remote receiver units, perfect for point-to-point digital signage applications that require high quality HDMI video. The Extender also works to extend Infrared IR signals from remote controls, perfect for controlling your video source from your video destination. For additional distance, HDMI cables up to 32-feet (10-meters) in length can be used on the local & remote ends.

...

Extend an HDMI video & audio over standard CAT5 cabling, with support for RS232 Serial & Infrared control. The ST121UTPHD2 HDMI over Cat 5 Extender Kit can extend the audio & video signal output from an HDMI-equipped device by up to 330 feet (100 Meters), over a single CAT5 cable, or up to 165 Feet (50 Meters) over a single CAT6 cable. The extender supports full High-Definition video (1080p) & HD 3D, & also extends the accompanying digital audio signal. For convenient, time-saving control of the media source, the CAT5 HDMI extender offers bi-directional RS232 serial & Infrared (IR) interfaces, which enable you to control the HDMI audio-video source from either end of the connection. The HDMI over CAT5 Extender Kit

Includes:: both the HDMI to CAT5 transmitter & the Cat 5 to HDMI receiver needed for a cost-effective, ready-to-use digital signage solution. To help ensure seamless performance without any unexpected or unnecessary interruptions, the HDMI Ethernet transmitter & receiver units are fully compliant with High Speed HDMI & HDCP standards, & each unit features lockable power connectors to prevent accidental disconnections.

...

Extend an HDMI video & audio over standard CAT5 cabling, with support for RS232 Serial & Infrared control. The Star Tech.com HDBase T extender kit, extends HDMI up to 330 feet (100 Meters) over a single CAT5e or CAT6 cable. The extender supports Ultra HD & Full HD resolutions (4K / 1080p) with support for 3D & the accompanying 7.1 digital audio. For added versatility the transmitter & receiver can be used to transmit IR & RS232 serial communication over the same cable. The versatility of this video extender makes it an ideal solution for digital signage applications. HDBase T is a standardized, zero latency, video distribution technology that's revolutionizing HDMI distribution. HDBase T uses an advanced method of modulation that enables you to distribute uncompressed HDMI audio & video along with additional signals such as 100 Base T Ethernet, IR, RS-232 serial & power over cable. The extender offers HDBase T technology with HDMI, IR, & RS232 control in a single CAT 5 extender kit, for complete end-to-end control. Offering greater versatility than traditional HDMI extenders or HDMI cabling alone HDBase T is the clear choice for every integrator & system designer. The IR extension enables you operate your display & an IR-enabled source device, such as a Blu-ray player or TV Set top box, from either end of your extension. While RS232 control let you to connect a serial I/O device at your display
- an ideal solution for adding a serial touch screen interface to your remote display. With the A/V industry quickly adopting 4K as the new high-resolution video standard, long range video distribution can be a challenge with standard HDMI cables beginning signal degradation at 30 feet. With support for 4K you'll be amazed at how HDBase T maintains your Ultra HD picture quality, four times the resolution of high-definition 1080p, even at 330 feet away from your video source. Plus, because the extender is still backward compatible with High-Definition
...

Extend HDMI up to 165ft (50m) over Cat 5e/6 cabling with Power over Cable to Receiver. The ST121SHD50 HDMI over Cat 5e/ Cat 6 Video Extender kit lets you extend HDMI video & audio by up to 165 feet (50 Meters) over dual Cat 5e cables, or 130 feet (40 Meters) over dual Cat 6 cables. For added versatility the kit features Power Over Cable & only requires a single power adapter that can be connected to either the Transmitter or Receiver. With support for High-Definition resolutions of up to 1920x 1080 / 1080p & the accompanying digital audio, this cost-effective HD extender can easily be installed using new or existing Ethernet infrastructure wiring. For a convenient plug-&-play installation, the HDMI extender features built-in EDID monitor emulation, which ensures native resolution & maximum compatibility with your display or projector. For added flexibility & convenience, HDMI cables up to 32ft (10m) can be connected to both the local & remote units, which lets you extend your HDMI signal to even further distances. The HDMI extender kit offers a point-to-point digital signage solution right out of the box, including both local transmitter & remote receiver units, along with optional hardware that lets you mount the units as needed. Plus, with Power Over Cable, you can easily extend an HDMI signal in areas where access to power outlets is limited. ...

Extend HDMI up to 165ft (50m) over Cat 5e/6 cabling with Power over Cable to Receiver. The ST121SHD50 HDMI over Cat 5e/ Cat 6 Video Extender kit lets you extend HDMI video & audio by up to 165 feet (50 Meters) over dual Cat 5e cables, or 130 feet (40 Meters) over dual Cat 6 cables. For added versatility the kit features Power Over Cable & only requires a single power adapter that can be connected to either the Transmitter or Receiver. With support for High-Definition resolutions of up to 1920x 1080 / 1080p & the accompanying digital audio, this cost-effective HD extender can easily be installed using new or existing Ethernet infrastructure wiring. For a convenient plug-&-play installation, the HDMI extender features built-in EDID monitor emulation, which ensures native resolution & maximum compatibility with your display or projector. For added flexibility & convenience, HDMI cables up to 32ft (10m) can be connected to both the local & remote units, which lets you extend your HDMI signal to even further distances. The HDMI extender kit offers a point-to-point digital signage solution right out of the box, including both local transmitter & remote receiver units, along with optional hardware that lets you mount the units as needed. Plus, with Power Over Cable, you can easily extend an HDMI signal in areas where access to power outlets is limited. ...

Extend an HDMI signal by up to 330ft (100m) over CAT5/CAT6 cable, with 10/100 network, infrared, serial control, & Power over Cable. The Star Tech.com HDBase T Extender Kit, extends HDMI up to 330 feet (100 Meters) over a single CAT5e or CAT6 cable. The extender supports Ultra HD & Full HD resolutions (4K / 1080p) with support for 3D & the accompanying 7.1 digital audio. For added versatility, both the transmitter & receiver can be powered from one power source using Power Over Cable (POC). The versatility of this video extender makes it an ideal solution for digital signage applications in large buildings such as commercial shopping centers, stadiums, schools, & hospitals. HDBase T is a standardized, zero latency, video distribution technology that's revolutionizing HDMI distribution. HDBase T uses an advanced method of modulation that enables you to distribute uncompressed HDMI audio & video along with additional signals such as 100 Base T Ethernet, IR, RS-232 serial & power over cable. The extender offers HDBase T technology with HDMI, IR, RS232, Ethernet, & power in a single extender kit, for complete end-to-end control. Offering greater versatility than traditional HDMI extenders or HDMI cabling alone HDBase T is the clear choice for every integrator & system designer. The IR extension enables you to operate your display & an IR-enabled source device, such as a Blu-ray player or TV Set top box, from either end of your extension. RS232 control let you to connect a serial I/O device at your display
- an ideal solution for adding a serial touch screen interface to your remote display for interactive digital signage presentations. While the built-in 6-Port Ethernet hub lets you connect 5 IP devices to your network (3 remote, 2 local). With the A/V industry quickly adopting 4K as the new high-resolution video standard, long range video distribution can be a challenge with standard HDMI cables beginning signal degradation at 30 feet. With HDBa
...

Extend HDMI up to 330ft (100m) over CAT5/CAT6 cable with Power over Cable to Receiver. The ST121HDBTPW video extender kit enables you to extend HDMI audio/video up to 330 feet (100 meters) over a single CAT5e/6 cable. For added versatility, the extender kit supports Power over Cable (POC), which allows power to be sent over the CAT5e/CAT6 cable, powering both the transmitter & receiver with just one adapter. To help you save installation costs, the extender kit can be installed using new or non-existing non-proprietary Ethernet infrastructure wiring with the included mounting brackets. Plus, with support for High-Definition resolutions of up to 1080p & 4K plus the accompanying digital audio, the HDMI extender lets you get the most of your high-end A/V equipment. The HDMI extender kit

Includes:: both the local transmitter & remote receiver units
- perfect for point-to-point digital signage applications. To add to the maximum extension distance, the HDMI extender supports HDMI cables up to 32ft on both the local & remote ends.


...

Extend HDMI up to 330ft (100m) over CAT5/CAT6 cable with Power over Cable to Receiver. This HDBase T extender Kit, extends HDMI up to 330 feet (100 Meters) over a single CAT5e or CAT6 cable. The extender supports Ultra HD & Full HD resolutions (4K / 1080p) with support for 3D & the accompanying 7.1 digital audio. For added versatility, both the transmitter & receiver can be powered by the same single power source using Power Over Cable (POC). The versatility of this video extender makes it an ideal solution for digital signage applications in large buildings such as commercial shopping centers, stadiums, schools, & hospitals. HDBase T is a standardized, zero latency, video distribution technology that's revolutionizing HDMI distribution. HDBase T uses an advanced method of modulation that enables you to distribute uncompressed HDMI audio & video, along with additional signals such as 100 Base T Ethernet, IR, RS-232 serial & power over cable. For greater versatility than a traditional HDMI extender or HDMI cabling alone, this HDBase T extender offers HDMI + Power Over Cable in a single kit. The added benefit of power over cable means you'll only need one power source at either side of your extension, great for extending to areas where power outlets may be limited. With the A/V industry quickly adopting 4K as the new high-resolution video standard, long range video distribution can be a challenge with standard HDMI cables beginning signal degradation at 30 feet. With HDBase T you'll be amazed at how Ultra HD picture quality, four times the resolution of high-definition 1080p can be maintained even at 330 feet away from your video source. Plus, because the extender supports High-Definition 1080p & lower resolutions at 330, you can comfortably use this extender to make any video source look great, while future proofing your setup for 4K implementation. This extender has been specially crafted for a smooth, tidy setup. HDBase T technology allows for ...

Extend a single HDMI video signal up to 25m (80ft) over Cat 6 cabling. The ST121HD25 HDMI over Cat 6 Video Extender kit lets you extend an HDMI video signal over Category 6 Ethernet cable (UTP) at distances of up to 80-feet (25-meters). With support for resolutions of up to 1920x 1080, this cost-effective HDMI extender is a plug-&-play solution that can easily be installed using new or existing Ethernet infrastructure wiring. The HDMI over Cat 6 Video Extender kit

Includes:: both the local transmitter & remote receiver units
- perfect for small scale point-to-point digital signage applications that require high quality HDMI video. For additional distance, HDMI cables up to 32-feet (10-meters) in length can be used on the local & remote end.


...

This HDMI over CAT6 extender lets you transmit your 4K 60 Hz signal up to 165 ft. (50 m) over a single CAT6 cable. The extender supports High Dynamic Range (HDR), providing high contrast images with enhanced video. This HDMI Ethernet extender supports a 4K 60 Hz (3840 x 2160) resolution, providing four times the picture quality of high-definition (1080p). The extender supports HDMI 2.0 capabilities, offering 4:4:4 chroma subsampling. This ensures a crystal-clear picture that's ideal for delivering video content. With HDR support, you can enjoy increased contrast, color brightness & greater luminosity in your images. Extend an HDMI signal to up to 165 ft. (50 m) with the HDMI to CAT6 converter. Use your existing CAT6 cable infrastructure with a direct connection to the converter for an easy run through walls & ceilings, saving you on installation costs. Connect your HDMI 2.0 devices & displays with complete confidence, knowing this extender is HDCP 2.2 compliant. This lets you harness the capabilities of HDMI-enabled devices such as Blu-ray players or online streaming devices in higher resolutions. It is also backward compatible with previous generations of HDMI & HDCP. ...