Add two flushmount USB (Universal Serial Bus) 3.0 ports to your Express Card-enabled laptop. The ECUSB3S254F 2-Port Flush Mount USB (Universal Serial Bus) 3.0 Express Card Adapter lets you add two USB (Universal Serial Bus) 3.0 ports to your Express Card-enabled laptop. The USB (Universal Serial Bus) 3.0 card uses a unique design that allows it to sit flush in a standard 54mm laptop Express Card slot, creating a seamless add-on that can be left installed even while on the move, without having to worry about impact damage to either the card or the Express Card slot. Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. The Super Speed USB (Universal Serial Bus) 3.0 Card supports data transfer rates of up to 5 Gbps, & is backward compatible with USB (Universal Serial Bus) 2.0 (at up to 480 Mbps), or USB (Universal Serial Bus) 1.1/1.0 at up to 12/1.5 Mbps respectively
- the perfect laptop accessory for users to connect USB (Universal Serial Bus) devices, both new & old. UASP is supported in Windows 8, Server 2012 & Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive.
...

Free up space by mounting your flat-panel TV on a wall, with full-motion adjustment capability. Maximize space while creating an impressive display. This heavy-duty steel TV wall mount securely supports flat-screen TVs from 22" to 55". The arm extends easily to provide smooth, full-motion positioning for ideal viewing. Mount your flat-screen TV in a location that's convenient for visitors, clients & employees. This TV wall mount is ideal for the lobby, boardroom or other venues, providing an impressive & secure way to display a flat-panel TV or mount digital signage. It also frees up valuable space. The TV wall mount supports most 22" to 55" (558.8 to 1397 mm) LED or LCD flat panel TVs weighing up to 77 lb. (35 kg). The TV wall mount provides full-motion adjustment capability. The arm extends up to 19.8" (503 mm) from the wall to provide a wide range of movement & accommodate different screen positions & angles. The arm can also fold to tuck-in closely to the wall, providing a minimized profile, which enables you to position your display just 1.9" (49 mm) from the wall. The TV wall mount swivels +90° / -90° to provide maximum viewing flexibility. The mount also tilts +2° / -12°, letting you angle your TV display toward your audience. With the tilt feature, you can mount your TV lower or higher than eye level & still view it comfortably. The robust steel design safely & securely supports your flat-screen TV, to protect your investment. The TV wall mount also

Includes:: plastic brackets for cable management to keep cables neatly out of sight.

...

Strong & sleek, this full-motion TV wall mount lets you free up space by wall-mounting your 32" to 75" TV, & adjust it to the right viewing position with ease. Once it's installed, the flat-screen TV wall mount is simple to adjust without using tools. You can extend the arms with ease to position your TV anywhere from 4.1" to 21.6" (105 to 550 mm) away from the wall. The TV mount swivels +/-60 degrees & tilts +/-15 degrees for optimum viewing. This premium television wall mount beautifully combines form & function. Designed to provide an impressive appearance in every position, the premium black & silver design makes it absolutely ideal in a company lobby or hallway, information kiosk, or living space. With the arms extended, the protective covers provide a tidy, professional look. The cable-management channel inside the arms keeps cables neatly tucked away. Engineered with steel & aluminum, the robust TV mount securely supports a TV with a maximum weight capacity of 187.4 lb. (85 kg). ...

Display Wall Mount Steel For up to 80" Displays. With its contemporary design,  featuring a long extension arm with a large swivel range, this full motion TV wall mount for large-screen displays is the perfect choice for versatile viewing.  You can extend the swiveling arm out to adjust your screen position, making it easy to view your display from numerous angles within the room. Save Space This adjustable wall mount TV bracket is ideal for a meeting space, lobby, boardroom,  classroom or other venues. The monitor mount provides an impressive & secure way to display a flat-panel TV or mount a digital signage display, while freeing up valuable space. Robust Steel Construction Engineered from high-grade steel, the flat-screen TV wall mount securely supports VESA mount displays, including curved TVs, 37" to 100" with a weight capacity of 110 lb. (50 kg). Full-Motion Adjustment With a smooth & effortless motion, you can extend the articulating arm out from the wall up to 25.5" (65 cm) to adjust the position of your display. Swivel the arm with ease, up to 90 degrees to the left or right, to position your TV for comfortable viewing. You can also retract the arm back, to nest against the wall. With its low-profile design, the articulating TV wall mount enables your display to sit just 2.8" (70 mm) from the wall. Find the Right Viewing Angle Swivel your screen +/- 90 degrees and tilt your screen -2 to +15 degrees for ideal viewing and to reduce glare. The tilting TV wall mount also has a screen level adjustment, so you can adjust your display up to 3 degrees clockwise or counterclockwise after you've installed it,  to ensure your display is level. Easy to Install The universal swivel TV wall mount is easy to install. The television mounting brackets for flat screen displays feature a post-installation lateral shift, to help adjust & center the mount on the wall, even with off-center studs. Cable management keeps cables neatly organize ...

Count on reliable & cost-effective Gigabit Ethernet connections with this RJ45 Mini-GBIC module. This HP compatible Gigabit Copper SFP is engineered by Star Tech.com to deliver what you need most in your network connections: reliable performance. Built to exacting specifications & fully tested to ensure maximum performance, this high-quality SFP transceiver module can be installed into HP Blade System c-Class equipment that supports the HP 453154-B21 module, as well as other major brands of networking equipment. This RJ45 1000 Base-T SFP delivers Gigabit connectivity over a distance of up to 100 m (328 ft.). It provides a dependable & cost-effective way to add, replace or upgrade a copper Ethernet port on your networking equipment. This Gigabit RJ45 SFP is manufactured by Star Tech.com to meet or exceed OEM specifications & comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, Star Tech.com provides an extensive range of networking products including copper & fiber network cards, fiber media converters, Ethernet switches & wireless products. This Gigabit Copper SFP is engineered to the highest quality standards & is 100% HP compatible, equivalent to the HP 453154-B21 SFP transceiver. The Star Tech.com transceiver is configured & fully tested to ensure it works seamlessly with HP or other major brands of networking equipment. You can be assured that the use of Star Tech.com SFP products should not affect the warranty protection of your networking equipment. Delivering both convenience & scalability, this SFP is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile & convenient solution that's compatible with a multitude of multi- & single-port Gigabit Ethernet networking devices. ideal to be used in HP Blade System c-Class & other compatible equipment, the SFP provides reliable perfo ...

Convert & extend a Gigabit Ethernet connection over fiber, using the Gigabit SFP of your choice. The ET91000SFP2C Open SFP Fiber Media Converter card module converts & extends a Gigabit Ethernet connection over fiber, using the Gigabit SFP of your choice. A versatile solution for connecting an Ethernet (1000 Base-T) network to remote network segments over a fiber backbone, the media converter features an open SFP slot that lets you choose the MSA-Compliant Gigabit SFP that best suits your fiber connection mode (single / multi-mode) & distance requirements. Designed for applications where multiple chassis-powered media converters are required, this Gigabit media converter ships as a card module that can easily be installed into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). For standalone operation this Gigabit media converter can also be purchased as a standard Open SFP Media Converter (ET91000SFP2). The fiber to Ethernet converter offers simple plug-&-play installation, while support for full-duplex operation & Jumbo Frame support provides efficient network operation. ...

Add reliable, cost-efficient Gigabit Ethernet connections over single-mode/multi-mode fiber with this Mini-GBIC module. This Star Tech.com Gigabit fiber SFP is engineered to deliver reliable network connections. Built to exacting specifications & fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco switches & routers that support the GLC-LH-SMD transceiver module, as well as other major brands of networking equipment. It provides a dependable & cost-effective way to add, replace or upgrade the ports on your 1000 Base-LX/LH networking equipment, & it's backed by a lifetime warranty. This single-mode/multimode SFP transceiver is manufactured by Star Tech.com to meet or exceed OEM specifications & comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, Star Tech.com provides an extensive range of networking products including copper & fiber network cards, fiber media converters, Ethernet switches & wireless products. The SM/MM Gigabit SFP is engineered to the highest quality standards & is 100% Cisco compatible, equivalent to the Cisco GLC-LH-SMD SFP transceiver. The Star Tech.com SFP transceiver is configured & fully tested to ensure it works seamlessly with Cisco or other major brands of networking equipment. You can be assured that the use of Star Tech.com SFP products should not affect the warranty protection of your networking equipment. Delivering both convenience & scalability, this fiber transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile & cost-effective solution that's compatible with a multitude of Gigabit networking devices. ideal to be used in switches, routers & other networking equipment, the SFP provides reliable performance, allowing you to expand your network to remote segments cost-effecti ...

Add, replace or upgrade SFP modules on Gigabit fiber equipment. The SFPGESST Cisco Compatible Gigabit Fiber SFP Transceiver Module MM LC
- 550m (1804 ft) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a Multimode LC port on your Gigabit fiber networking equipment or fiber media converter. Supporting data rates up to 1.25 Gbps as well as Digital Diagnostics Monitoring (DDM), this LC SFP/ Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. Delivering both convenience & scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot. This 850nm multi-mode SFP module is compatible with the Cisco SFP-GE-S transceiver.
...

Add, replace or upgrade SFP modules on Gigabit fiber equipment. The SFPGLCSXMMST Cisco Compatible Gigabit Fiber SFP Transceiver Module MM LC
- 550m (1804 ft) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a Multimode LC port on your Gigabit fiber networking equipment or fiber media converter. Supporting data rates up to 1.25 Gbps, this LC Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. Delivering both convenience & scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot. This 850nm multi-mode SFP module is compatible with the Cisco GLC-SX-MM transceiver. Also a perfect accessory for the Star Tech.com PCI Express Open SFP NIC (PEX1000SFP), or Gigabit POE Open SFP Media Converter (ET1110PSE) products.
...

Add, replace or upgrade SFP modules on Gigabit fiber equipment. The SFPGLCLHSMST Cisco Compatible Gigabit Fiber SFP Transceiver Module SM LC
- 10 km (6.2 miles) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a Single-Mode LC port on your Gigabit fiber networking equipment or fiber media converter. Supporting data rates up to 1.25 Gbps, this LC SFP/ Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. Delivering both convenience & scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot. This 1310nm single-mode SFP module is compatible with the Cisco GLC-LH-SM transceiver. Also a perfect accessory for the Star Tech.com PCI Express Open SFP NIC (PEX1000SFP), or Gigabit POE Open SFP Media Converter (ET1110PSE) products.
...