Build a RAID array with two m SATA SSDs that can be installed into a single 2.5in SATA bay. Vastly increase system performance by adding a dual m SATA SSD RAID array into any 2.5" SATA HDD application with the 25SAT22MSAT m SATA to SATA adapter. Utilize the full potential of your SATA III controller, with m SATA SSDs reducing your Data transfer bottleneck with file transfer speeds up to 6 Gbps. m SATA SSDs also save you money by reducing your power consumption over regular platter drives. You can achieve greater SSD capacity, or data redundancy with the Dual SSD controller supporting multiple RAID modes (RAID 0, 1, BIG). The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independent of one another. Help protect the health of your drive with an open-frame design ensuring maximum heat dissipation. ...

Build a RAID array with two m SATA SSDs that can be installed into a single 2.5in SATA bay. Vastly increase system performance by adding a dual m SATA SSD RAID array into any 2.5" SATA HDD application with the 25SAT22MSAT m SATA to SATA adapter. Utilize the full potential of your SATA III controller, with m SATA SSDs reducing your Data transfer bottleneck with file transfer speeds up to 6 Gbps. m SATA SSDs also save you money by reducing your power consumption over regular platter drives. You can achieve greater SSD capacity, or data redundancy with the Dual SSD controller supporting multiple RAID modes (RAID 0, 1, BIG). The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independent of one another. Help protect the health of your drive with an open-frame design ensuring maximum heat dissipation. ...

Build a RAID array with two m SATA SSDs that can be installed into a single 2.5in SATA bay. Vastly increase system performance by adding a dual m SATA SSD RAID array into any 2.5" SATA HDD application with the 25SAT22MSAT m SATA to SATA adapter. Utilize the full potential of your SATA III controller, with m SATA SSDs reducing your Data transfer bottleneck with file transfer speeds up to 6 Gbps. m SATA SSDs also save you money by reducing your power consumption over regular platter drives. You can achieve greater SSD capacity, or data redundancy with the Dual SSD controller supporting multiple RAID modes (RAID 0, 1, BIG). The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independent of one another. Help protect the health of your drive with an open-frame design ensuring maximum heat dissipation. ...

Charge two iPad tablets simultaneously, in your car. The USBLT2PCARW Lightning Car Charger features one 2.1A Lightning port & one 2.1A USB (Universal Serial Bus) charge port & works with any standard car AUX power outlet, enabling you to charge two mobile devices simultaneously while you're on the road. The attached Lightning cable means that you can charge any Lightning-equipped Apple mobile digital device. The USB (Universal Serial Bus) 2.0 port gives you the option of charging an additional Apple device through either a second Lightning Cable or a 30-pin Dock Cable. Or, you can charge a Micro USB (Universal Serial Bus) or Mini USB (Universal Serial Bus)-enabled mobile device, such as a smartphone, tablet, GPS, using a Mini/ Micro USB (Universal Serial Bus) Cable. No matter what you choose to charge, you can always be sure you have the correct charge available for all your mobile devices. Having the ability to charge two devices simultaneously means you & your passenger are always fully charged & ready go. Plus, your passenger can charge & text, work or game while their device is charging. ...

Charge two iPad tablets simultaneously, in your car. Do you carpool to work & need to flip a coin to see who will get to charge their tablet on the way to the office? Do you need to charge your tablet & phone at the same time, so that they're both ready to use by the time you reach your destination? Whatever your situation, this dual-port car charger offers a high-powered solution for charging two mobile devices simultaneously, while you're on the road. You can charge any Lightning mobile device, including your iPad or iPhone, using this convenient 2-in-1 adapter. Plus, since the cable is attached directly to the charger, it won't ever get lost in your vehicle, or be just out of reach while you're driving. The integrated USB (Universal Serial Bus) port gives you the option to charge an additional Apple device, including a second iPad, at the same time. Don't have a second Apple device? You can also charge Micro USB (Universal Serial Bus) or Mini USB (Universal Serial Bus)-enabled mobile devices with this adapter, such as a smartphone, tablet, or GPS using a USBHAUBMB1MW Mini/ Micro USB (Universal Serial Bus) cable. No matter what you choose to charge, you can always be sure you have the correct charge available for all your mobile devices. Each charge port provides 2.1A of power to assure that you have enough power to charge everything from a phone to a tablet. Whether you're charging two tablets at the same time or charging a phone & a tablet, you can be sure all of your mobile devices are ready when you need them. ...

The EC2000S 2-port Gigabit Express Card Ethernet Adapter adds 2 10/100/1000 Mbps Ethernet ports to an Express Card-enabled laptop, or small form factor system, enabling you to connect to two separate physical networks simultaneously with dedicated bandwidth, or providing full dedicated bandwidth to virtual machines. Supporting features such as NDIS5 checksum & large send offload for lower CPU utilization, Wake-on-LAN (WOL) & Remote Wake-up power management, jumbo frames & VLAN tagging, this Express Card Ethernet Adapter is ready to handle a wide variety of scenarios. With a 34mm Express Card form factor, this compact & portable Gigabit Ethernet Adapter will fit in any Express Card-enabled system. ...

Add dual Gigabit Ethernet ports to a client, server or workstation through a PCI Express slot. The ST1000SPEXD2 Dual Port PCIe Gigabit Ethernet Network Server Adapter Card (Low Profile) provides two 10/100/1000 Mbps capable Ethernet ports & is fully compatible with IEEE 802.3/u/ab standards. Suitable for any PCI Express-enabled client, server or workstation, the Network Adapter Card supports high performance dual channel networking & maximum data transfer speeds of 1000 Mbps in each direction (2000 Mbps total)
- up to 10 times faster than 10/100 Ethernet. This low profile-compatible server network card supports features such as Jumbo Frames, VLAN tagging & Wake on LAN (WOL), &

Includes:: an optional full profile bracket that makes it easy to install the card in either a small form factor/low profile or full/standard computer case/server.


...

Add two Power-over-Ethernet Gigabit Ports to a PCI Express-enabled Computer. The ST2000PEXPSE Dual Port Po E NIC provides two 10/100/1000 Mbps Po E RJ45 ports that can provide up to 25.5W of power each, combining a network data connection & power on a single cable, for less clutter & convenient installations in remote locations. This full/low profile Gigabit server adapter supports the IEEE 802.3at (Type 1 & 2) standard for a Power Sourcing Equipment (PSE) device, & can deliver 48V DC power to compliant Powered Devices (PD). This eliminates the need for a separate power source & cable for remote networked devices such as IP cameras, IP phones & wireless access points. Suitable for any PCI Express-enabled client, server or workstation, this versatile Po E network adapter supports features such as Jumbo Frames, VLAN tagging & Wake on LAN (WOL). ...

Add dual Gigabit Ethernet ports to a client, server or workstation through a PCI Express slot. The ST1000SPEXD3 PCI Express Dual Port Gigabit Server Network Adapter Card (PCIe NIC) lets you add two gigabit Ethernet ports to a client, server or workstation through a single PCI Express slot. Each port provides 10/100/1000 Mbps capable Ethernet & is fully compatible with IEEE 802.3/u/ab standards. Suitable for any standard PCI Express-enabled system, the 2-port Ethernet card supports full-duplex flow control for maximum data transfer speeds of up to 2000 Mbps
- an ideal single card, dual NIC solution for setting up dual-homed, or multi-homed host configurations providing added security to corporate networks. The dual port server adapter is compliant with the PCIe 2.0 standard & features support for Jumbo Frames & 802.1q VLAN tagging as well as Wake on LAN (WOL). The adapter

Includes:: an optional low profile bracket that can be used for installation into a standard or low profile computer chassis.


...

Add dual Gigabit Ethernet ports to a client, server or workstation through a PCI Express slot. The ST1000SPEXD4 PCI Express Dual-Port Gigabit Network Card lets you add two gigabit Ethernet ports to a client, server or workstation through a single PCIe slot. Each port provides 10/100/1000 Mbps capable Ethernet & is fully compatible with IEEE 802.3/u/ab standards. Suitable for any standard PCI Express-enabled system, the 2-port Ethernet card supports full-duplex flow control for maximum data transfer speeds of up to 2000 Mbps
- an ideal 2-port NIC for setting up dual-homed, or multi-homed host configurations providing added security to corporate networks. The dual-port server adapter is compliant with the PCIe 2.0 standard & features support for Jumbo Frames & 802.1q VLAN tagging as well as Wake on LAN (Wo L). The adapter

Includes:: an optional low-profile/half-height bracket that can be used for installation into a standard or small form-factor computer chassis.


...