The AX743 module is built to insert into any one of the high-speed module bays found on Pro Safe GSM73xx S (4 optional bays) & GSM73xx Sv 2 (2 optional bays). Once inserted, the AX743 adapter module can then be utilized with standard 10 Gigabit SFP+ GBICs for fiber connectivity at 10 Gbps speeds. Specifically, this adapter module accommodates the Pro Safe AXM761 SFP+ GBIC 10GBASE-SR LC " Short Reach" or Pro Safe AXM762 SFP+ GBIC 10GBASE-LR LC " Long Reach". The AX743 is hot-swappable at any time into the switch & provides hot-swappable installation or removal of standard 10 GE SFP+ GBICs. ...

The NETGEAR GS510TP Smart Switch offers support for eight 10/100/1000 Mbps autosensing & two 1000M SFP Gigabit Ethernet switching ports. Using Gigabit ports, high-speed connections can be made to a server or network backbone. The GS510TP Smart Switch also provides the benefit of administrative management with a complete package of features for the observation, configuration, & control of the network. With a web-based Graphical User Interface (GUI), the switchs many capabilities can be viewed & used in a simple & intuitive manner. The switchs management features include configuration for port & switch information, VLAN for traffic control, port trunking for increased bandwidth, & Class of Service (Co S) for traffic prioritization. These features provide better understanding & control of the network. The GS510TP Smart Switch is a free-standing switch. It is IEEE-compliant & offers low latency for high-speed networking. All ports can automatically negotiate to the high speed. This capability makes the switch ideal for environments that have a mix of Ethernet, Fast Ethernet, or Gigabit Ethernet devices. In addition, all RJ-45 ports operate in half-duplex or full-duplex mode. ...

The GS110T Smart Switch provides the benefit of administrative management with a complete package of features for the observation, configuration, & control of the network. With a web-based Graphical User Interface (GUI), the switchs many capabilities can be viewed & used in a simple & intuitive manner. The switchs management features include configuration for port & switch information, VLAN for traffic control, port trunking for increased bandwidth, & Class of Service (Co S) for traffic prioritization. These features provide better understanding & control of the network. The GS110T Smart Switch is a free-standing switch. It is IEEE-compliant & offers low latency for high-speed networking. All ports can automatically negotiate to the highest speed. This capability makes the switch ideal for environments that have a mix of Ethernet, Fast Ethernet, or Gigabit Ethernet devices. In addition, all RJ-45 ports operate in half-duplex or full-duplex mode. ...

The GS110TPP comes with A superbly comprehensive set of features, such as enhanced VLAN & Qo S, access control lists (ACL), 802.1x port authentication (MD5), rate limiting & IGMP snooping & many more, to provide businesses with networks that are geared for growth while ensuring performance & reliability. Both an intuitive web-browser GUI interface & smart control center, offer simple management, making it a snap to monitor switch performance, configure ports, even set up port trunks, VLANs, & traffic prioritization. With the fanless design & compact form factor, the GS110TPP offers quiet operation & is suitable for deployments in any type of environment, especially the ones which are sensitive to noise. ...

The Pro SAFE GBIC Module fits into standard SFP slots & drives Gigabit Ethernet up to 100m distances with CAT5E/CAT6. ...

Adds 10 Gigabit Ethernet "long-reach" LC fiber connectivity to the standard SFP+ interfaces Fits into the two built-in 10GE SFP+ interfaces of GSM72xx PS / GSM73xx S Fits into the 10GE SFP+ interface of the SFP+ Adapter module AX743 Fits into standard 10 Gigabit SFP+ interfaces LC connector Drives 10 Gigabit Ethernet up to 10 km distances with 9/125 µm SMF single mode fiber cables Drives 10 Gigabit Ethernet up to 300 m distances with 50/125 µm laser-optimized OM3 multimode fiber cables Drives 10 Gigabit Ethernet up to 33m distances with 62.5/125 µm OM1 multimode fiber cables Provides hot-swappable installation or removal 10 G Base LR fiber technology is the same for XFP & SFP+: one Switch equipped with XFP 10 G Base-LR LC connectivity can uplink to another Switch equipped with SFP+ 10 G Base-LR LC connectivity using the same fiber ...

This GBIC is built to insert into any one of the two built-in 10 GE SFP+ interfaces of GSM7328 Sv 2 & GSM7352 Sv 2, & into the 10GE SFP+ interface of AX743 adapter module for GSM73xx S/GSM73xx Sv 2. Once inserted (hot-swappable), the AXM761 10GBASE-LR SFP+ (LC connector) drives 10 Gigabit Ethernet up to 10 km distances with 9/125µm SMF single mode fiber cables, or up to 33 m distances with 62.5/125µm OM1 multimode fiber cables. ...

- 10 Gigabit Ethernet LRM “long reach multimode” fiber connectivity (802.3aq standard)
- LC duplex connector
- Fits into the

...

The Pro Safe FS116P provides power & data from a single point, using Power over Ethernet (Po E) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link & eight of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary Po E or non-Po E equipment. In addition, it discontinues the power when Po E devices are disconnected. Easy & reliable, the Pro Safe FS116P automatically determines Po E requirements, speed, duplex, & cable type using Auto Uplink. The affordably priced Pro Safe FS116P delivers Po E to any small business network that wants to simplify the installation of wireless access points & IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. Po E eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access & lowers installation costs. Compact & flexible, the Pro Safe FS116P is ideal for small business network that want to inexpensively use Po E to deploy wireless access points & IP-based network surveillance cameras. Choose to plug in up to eight Ethernet or Fast Ethernet devices & mix in up to four 802.3af IP-based devices like wireless access points or IP-based network surveillance cameras. Place these 802.3af-compliant devices where they belong
- high up on walls & ceiling for maximum coverage
- or anywhere else you need them. Power & data are carried over standard Cat-5 cabling. The standards-based Pro Safe FS116P senses & adjusts for network speed & cabling type automatically, for easy integration into your existing 10/100 Ethernet network. For Po E, the switch automatically detects 802.3af-compliant devices, & supplies power as needed. Front panel LEDs keep you informed of switch and

...

The Pro Safe FS116P provides power & data from a single point, using Power over Ethernet (Po E) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link & eight of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary Po E or non-Po E equipment. In addition, it discontinues the power when Po E devices are disconnected. Easy & reliable, the Pro Safe FS116P automatically determines Po E requirements, speed, duplex, & cable type using Auto Uplink. The affordably priced Pro Safe FS116P delivers Po E to any small business network that wants to simplify the installation of wireless access points & IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. Po E eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access & lowers installation costs. Compact & flexible, the Pro Safe FS116P is ideal for small business network that want to inexpensively use Po E to deploy wireless access points & IP-based network surveillance cameras. Choose to plug in up to eight Ethernet or Fast Ethernet devices & mix in up to four 802.3af IP-based devices like wireless access points or IP-based network surveillance cameras. Place these 802.3af-compliant devices where they belong
- high up on walls & ceiling for maximum coverage
- or anywhere else you need them. Power & data are carried over standard Cat-5 cabling. The standards-based Pro Safe FS116P senses & adjusts for network speed & cabling type automatically, for easy integration into your existing 10/100 Ethernet network. For Po E, the switch automatically detects 802.3af-compliant devices, & supplies power as needed. Front panel LEDs keep you informed of switch and

...