HP E4210G Switch Series are entry-level Gigabit Ethernet LAN switches with enterprise-class quality of service (Qo S), security, & management features, delivering high value for network administrators looking for an economical edge device. Available Power over Ethernet (Po E) models are ideal for voice over IP & wireless networking installations, while non-Po E models are also available for simple port expansion. Dual-personality ports allow flexibility, including the ability to add 10 Gigabit Ethernet capability. Setting them apart from lower-end devices, the series switches support an industry-standard comm&-line interface, Web-based administration, & SNMP management. In addition, they support Intelligent Resilient Framework (IRF) stacking of up to four units. ...

The HP 5400 zl Switch Series is a HP Networking ASIC based modular switch designed for enterprise-edge, SMB, & branch office core deployments. This Layer 3 switch has 760 Gbps backplane & license free software with an advanced Layer 2 & 3 feature set including IPv 6, IPv 4 BGP, policy based routing, OSPF & robust Qo S. Virtualization with HP Alliance One solutions & flexible connectivity including 1 & 10 Gigabit Ethernet & Po E+, the 5400 zl Switch Series is Software-defined Network (SDN) ready with support for Open Flow. ...

HP Care Pack Services offer upgraded service levels to enhance your warranty cover for your total peace of mind & help you to stay up & running. ...

The HP 530SFP+ is a dual-port 10 Gb Ethernet adapter featuring the next generation BCM57810S single-chip solution from Broadcom in a PCIe 2.0 compliant form factor designed for select HP Pro Liant Gen 8 & Gen 7 ML/DL/SL servers. Leveraging Broadcom's market-proven architecture & software, the HP 530SFP+ delivers full line-rate performance across all ports with low power consumption. The HP 530SFP supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, PXE boot & virtualization features such as VMware Net Queue & Microsoft VMQ. Support for HP Sea of Sensors 3D Technology enhances server performance while reducing energy use & expense. ...

Are you looking to reduce network congestion & improve cable management at the servers in your HPE Pro Liant Gen 8 & Gen 9 environment? The HPE Ethernet 10 Gb 2-port 530T Adapter is a dual-port 10GBASE-T adapter, featuring the QLogic 57810S 10 Gb Ethernet solution from QLogic, in a PCIe 2.0 compliant form factor designed for HPE Pro Liant Gen 8 & Gen 9 rack & tower servers. HPE 530T Adapter delivers full line-rate performance across all ports with low power consumption, utilizing CAT 6A UTP cabling with distances up to 100 meters. Providing high performance Ethernet connectivity, it is ideal for virtual server & cloud computing environments. It supports enterprise class features (VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, PXE boot) & virtualization features (VMware Net Queue & Microsoft VMQ). The adapter's support for HPE Sea of Sensors 3D Technology enhances server performance by reducing energy consumption & expense. ...

The HP 332T is a dual-port, low-cost, low profile 1 Gb adapter featuring the BCM5720 Broadcom single-chip solution in a PCIe 2.0 compliant form factor designed for select HP Pro Liant Gen 8 & Gen 7 ML/DL/SL servers. It delivers full line-rate performance across all ports with low power consumption, providing Ethernet connectivity ideal for virtualization, security, server consolidation, & network segmentation. Supported advanced features include Large Send & Receive offload capability, TCP checksum & segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588 (Precision Time Protocol Â- PTP), & virtualization features such as VMware Net Queue & Microsoft Virtual Machine Queue (VMQ). Support for HP Sea of Sensors 3D Technology enhances server performance while reducing energy use & expense. ...

The HP 361T offers two high-performing 1 Gb E PCIe Gen 2.1 connections in a low cost, low power, halogen-free design. Based on the new fully integrated (bridgeless) Intel Ethernet I350 Controller, it introduces new levels of performance & power management technologies for HP Pro Liant Gen 8 DL/ML/SL servers & select G7 servers. It can be used with a full height or low profile bracket, & can operate at three different data rates (10/100/1000 Mbps). The HP 361T is positioned as the follow-on to the HP NC360T. ...

The HP Ethernet 1 Gb 4-Port 331T Adapter features the next generation of Ethernet integration, offering a single chip solution that reduces power requirements & optimizes I/O slot utilization. It delivers full line-rate performance across all ports with low power consumption. The HP 331T is ideal for virtualization, security, server consolidation, network segmentation, & other applications requiring maximum throughput & port density. The total aggregate throughput of 8 Gb meets the needs of customers desiring high bandwidth. The HP 331T supports advanced features such as Large Send & Receive offload capability, TCP checksum & segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588, & virtualization features such as VMware Net Queue & Microsoft VMQ. Support for HP Sea of Sensors 3D Technology enhances server performance while reducing energy use & expense. ...

The HP Ethernet 1 Gb 4-port 366FLR features the next generation of Ethernet integration offering in a single chip solution on a Flexible LOM form factor, further reducing power requirements for 4 ports of 1 Gb Ethernet. The HP 366FLR is the PCI Express 2.1 x 4 based on the latest Intel Ethernet Controller I350 designed for use with select HP Pro Liant Gen 8 rack & scalable servers. Its Flexible LOM form factor means customer now have choice to meet growing infrastructure needs. The HP 366FLR adapter supports advanced features such as Large Send offload capability, TCP checksum & segmentation, VLAN tagging, MSI-X, Jumbo frames, IEEE 1588, & virtualization features such as Intel Virtualization Technology for Connectivity, VMware Net Queue, Microsoft VMQ & WOL, & power management technologies like Energy Efficient Ethernet. ...

The HP Ethernet 1 Gb 4-port 331FLR Adapter for select HP Pro Liant Gen 8 & Gen 9 rack servers features the next generation of Ethernet integration, offering a single-chip solution in a Flexible LOM form factor, which offers the option for future upgrades to 10 Gb E networking speeds. It delivers full line-rate performance across all ports with low power consumption. The HP 331FLR is ideal for virtualization, security, server consolidation, network segmentation, & other applications requiring maximum throughput & port density. The total aggregate throughput of 4 Gb meets the needs of customers desiring high bandwidth. The HP 331FLR supports advanced features such as Large Send & Receive offload capability, TCP checksum & segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588, HP Sea of Sensors 3D & virtualization features such as VMware Net Queue & Microsoft VMQ. Support for HP Sea of Sensors 3D Technology enhances server performance while reducing energy use & expense. ...