D-Links Wireless N Open Source Access Point means that you can create your own personal wireless home network to share wireless Internet connection, documents, music, & photos. Using Wireless N technology, it offers a higher speed, extended coverage & virtually no dead spots while still compatible with previous network standards. This Access Point can be configured to operate in any of the following 7 modes: 1. Wireless Access Point (AP); 2. AP Client to connect to another Access Point; 3. Bridge, with one or more peer APs, to easily create dedicated building-to-building links; 4. Bridge with AP, to allow wireless clients on the bridging link; 5. Wireless repeater, to extend the wireless coverage & cover any "dead spot"; 6. WISP Client Router, to share an Internet connection based on Wi-Fi between wired computers without an additional router; 7. WISP Repeater, to share an Internet connection based on Wi-Fi between wired/wireless computers without an additional router. Robust security is included, with support for WPA/WPA2 encryption, MAC address filtering & the SSID broadcast disable function, which makes your network invisible for outsiders. A schedule function means that you can turn the wireless network off when not needed, saving energy. D-Link Clickn Connect (DCC), is an intuitive software wizard that runs directly from the product CD-ROM, helping you to install & configure the device without prior knowledge required. Advanced users will enjoy adding their own features, as the DAP-1360 is based on an open-source Linux platform. ...

D-Link's Wireless N Open Source Access Point means that you can create your own personal wireless home network to share wireless Internet connection, documents, music, & photos. Using Wireless N technology, it offers a higher speed, extended coverage & virtually no dead spots while still compatible with previous network standards. This Access Point can be configured to operate in any of the following 7 modes: 1. Wireless Access Point (AP); 2. AP Client to connect to another Access Point; 3. Bridge, with one or more peer APs, to easily create dedicated building-to-building links; 4. Bridge with AP, to allow wireless clients on the bridging link; 5. Wireless repeater, to extend the wireless coverage & cover any "dead spot"; 6. WISP Client Router, to share an Internet connection based on Wi-Fi between wired computers without an additional router; 7. WISP Repeater, to share an Internet connection based on Wi-Fi between wired/wireless computers without an additional router. Robust security is included, with support for WPA/WPA2 encryption, MAC address filtering & the SSID broadcast disable function, which makes your network invisible for outsiders. A schedule function means that you can turn the wireless network off when not needed, saving energy. D-Link Click'n Connect (DCC), is an intuitive software wizard that runs directly from the product CD-ROM, helping you to install & configure the device without prior knowledge required. Advanced users will enjoy adding their own features, as the DAP-1360 is based on an open-source Linux platform. ...

Use the Wireless N Access Point (DAP-1360) to create a new wireless network or simply extend your existing wireless network coverage to reach greater distances throughout a home or office. ** Seven Operation Modes** Can be flexibly configured to operate as an Access Point, Wireless Client, Bridge, Bridge with AP, Repeater, WISP Client Router or WISP Repeater. ** Total Security** Complete set of security features including WEP/ WPA/WPA2/WPS to safeguard your network against outside intruders. ** Better Wireless Coverage** Wireless N draft standard offers an increased range that is six times further than 802.11g ** Connect Home & SOHO To a Wireless Network** Connect this Access Point to a broadband modem & wirelessly share your Internet connection. The D-Link DAP-1360 access point is a draft 802.11n compliant device that delivers up to 14x faster speeds 1 & 6x farther range 1 than 802.11g while staying backward compatible with 802.11g & 802.11b devices. Enjoy surfing the web, checking e-mail, & chatting with family & friends online. ** Protect Your Wireless Network & Data Easily** The DAP-1360 provides 64/128-bit WEP encryption & WPA/WPA2 security to protect your network & wireless data. This device also supports Wi Fi Protected Setup (WPS) to quickly & securely setup a wireless network. In addition, it also provides MAC address filtering a nd the disable SSID Broadcast function to limit outsiders’ access to your home & office network. ** Flexibly Configure Your AP for Different Applications** The DAP-1360 can be configured to operate as (1) an Access Point to act as a central hub for wireless users, (2) a Wireless Client to connect to another Access Point, (3) a Bridge to joint two wireless workgroups together, (4) a Bridge with AP to act as wireless hub & a bridge at the same time, (5) a Repeater to extend the wireless coverage to cover all “dead” spots, (6) a WISP Client Router to let wireless Internet service sub ...

The D-Link Wireless N Dualband USB (Universal Serial Bus) Mini Adapter is an 802.11n (draft 2.0) client device designed for users looking to get a reliable wireless connection that can also handle High-Definition (HD) video streaming throughout the house. This is best achieved by using the DWA-160 together with a draft 802.11n quadband router such as the D-Link DIR-855. The DWA-160 supports Wireless N signals in either the 2.4 or 5 GHz frequency range. This means that you can check e-mail & browse the Internet using the 2.4 G Hz band while reserving the 5 G Hz band for streaming HD movies & other media. The DWA-160 is also backward compatible, which means it can be used in existing 802.11g or 802.11a networks to enable significantly enhanced reception. ...

The D-Link DAP-2590 Air Premier N Dual Band Po E Access Point provides businesses with a solution for deploying next generation draft 802.11n local area networks (LANs). Designed specifically for business-class environments, such as large or enterprise corporations, this access point provides secure & manageable dual band wireless LAN options for network administrators. The DAP-2590 Air Premier N Dual Band Po E Access Point allows network administrators to arrange a highly manageable & extremely robust dual band wireless network. All three detachable dual band antennas supply optimal wireless coverage in either 2.4 G Hz (802.11g & draft 2.0 802.11n) or 5 G Hz (802.11a & draft 2.0 802.11n) frequency bands. Enclosed in a plenum-rated metal chassis, the Air Premier N Dual Band Po E Access Point adheres to strict fire codes for placement in air passageways. For advanced installations, this high-speed access point has integrated 802.3af Power over Ethernet (Po E) support, allowing installation of this device in areas where power outlets are not readily available. The DAP-2590 delivers reliable wireless performance with maximum wireless signal rates of up to 300 Mbps in either the 2.4 G Hz or 5 G Hz wireless b&. Support for the Wi-Fi Multimedia (WMM) Quality of Service feature, makes it an ideal access point for audio, video, & voice applications. in addition, this access point supports load balance features to ensure maximum performance. ...

D-Links DSR-1000N Unified Services Router is a secure, high performance networking solution to address the growing needs of small & medium businesses. Integrating high-speed Wireless N & mobile 3G support, the DSR-1000N offers comparable performance to traditional wired networks but with fewer limitations. Optimal network security is provided via features such as virtual private network (VPN) tunnels, IP Security (IPSec), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP), & Secure Sockets Layer (SSL), making it ideal for SMB & branch offices that need a secure, reliable connection to remote resources. The DSR-1000N

Includes:: dual-WAN Gigabit Ethernet which provides policy-based service management, ensuring maximum productivity for your business operations. The failover feature maintains data traffic without disconnecting when a landline connection is lost. The Outbound Load Balancing feature adjusts outgoing traffic across two WAN interfaces & optimizes the system performance resulting in high availability. The second WAN port can be configured as a DMZ port allowing you to run isolated servers on your LAN. Designed to deliver superior wireless performance, the DSR-1000N

Includes:: Wireless N on either the 2.4 GHz or 5 GHz radio bands. Multiple In Multiple Out (MIMO) technology allows DSR-1000N to provide high data rates with minimal "dead spots" throughout the wireless coverage area. The DSR-1000N supports 3G mobile connectivity via its USB (Universal Serial Bus) ports. This capability offers an additional secure data connection for networks that provide critical services. The DSR-1000N can be configured to automatically switch to a 3G network whenever a physical link is lost. A fully featured virtual private network (VPN) provides your mobile workers & branch offices with a secure link to your resources. Site-to-site VPN tunnels use IP Security (IPSec) Protocol, Point-to-Point Tunneling Protocol (PPTP), or Layer 2 Tunneling Protocol (L2TP)



...

D-Link's DSR-1000N Unified Services Router is a secure, high performance networking solution to address the growing needs of small & medium businesses. Integrating high-speed Wireless N & mobile 3G support, the DSR-1000N offers comparable performance to traditional wired networks but with fewer limitations. Optimal network security is provided via features such as virtual private network (VPN) tunnels, IP Security (IPSec), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP), & Secure Sockets Layer (SSL), making it ideal for SMB & branch offices that need a secure, reliable connection to remote resources. The DSR-1000N

Includes:: dual-WAN Gigabit Ethernet which provides policy-based service management, ensuring maximum productivity for your business operations. The failover feature maintains data traffic without disconnecting when a landline connection is lost. The Outbound Load Balancing feature adjusts outgoing traffic across two WAN interfaces & optimizes the system performance resulting in high availability. The second WAN port can be configured as a DMZ port allowing you to run isolated servers on your LAN. Designed to deliver superior wireless performance, the DSR-1000N

Includes:: Wireless N on either the 2.4 GHz or 5 GHz radio bands. Multiple In Multiple Out (MIMO) technology allows DSR-1000N to provide high data rates with minimal "dead spots" throughout the wireless coverage area. The DSR-1000N supports 3G mobile connectivity via its USB (Universal Serial Bus) ports. This capability offers an additional secure data connection for networks that provide critical services. The DSR-1000N can be configured to automatically switch to a 3G network whenever a physical link is lost. A fully featured virtual private network (VPN) provides your mobile workers & branch offices with a secure link to your resources. Site-to-site VPN tunnels use IP Security (IPSec) Protocol, Point-to-Point Tunneling Protocol (PPTP), or Layer 2 Tunneling Protocol (L2TP)



...

The DES-3200 series is a member of D-Link's Layer 2 x Stack Managed Switch family designed for the Metro ETTX & FTTX market. The DES-3200 series provides 16 100 Mbps Fast Ethernet connections plus 2 combo Gigabit/SFP ports. The DES-3200-18 comes with a 9-inch desktop size & fanless feature which is suitable for ETTH deployment. ...

The DES-3200 Series is a member of D-Link's Layer 2 managed switch family designed for the ETTX, FTTX, & enterprise markets. The DES-3200 Series provides 8/16/24, or 48 10/100 Mbps Fast Ethernet connections & various SFP or combo Gigabit/SFP ports uplink, as well as Po E options. ...

The x Stack DES-3528 Ethernet switch is part of D-Links DES-3528/3552 series switches that inherit most of the features from the current DES-3526/50 switches with additional functions such as, notably enhanced switching capacity, physical stacking, Layer 2+ functions including static routing, multicast support & enhanced security, making it an ideal access layer solution for enterprise & campus networks. This switch can seamlessly integrate with L3 core switches to form a part of multi-level network structure of high-speed backbone & centralized servers. ...