The DGS-1510 series is the next generation of Smart Pro switch. It contains 16, 24 or 48 10/100/1000 Mbps ports plus 2 Gigabit SFP ports & 2 10G SFP+ ports, as well as one 24 10/100/1000 Mbps Po E plus 2 Gigabit SFP ports & 2 10G ports Smart Pro switch. With its 10G SFP+ ports, the DGS-1510 series is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch & edge switch. The DGS-1510 Series Gigabit Stackable Smart Pro Switches with 10G Uplinks

Includes:: a Po E-enable switch for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port Po E Switch that provides 24 Po E-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1510 Series provide functionality, security, & manageability for a fraction of the standard cost of ownership. Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models

...

The DGS-1510 series is the next generation of Smart Pro switch. It contains 16, 24 or 48 10/100/1000 Mbps ports plus 2 Gigabit SFP ports & 2 10G SFP+ ports, as well as one 24 10/100/1000 Mbps Po E plus 2 Gigabit SFP ports & 2 10G ports Smart Pro switch. With its 10G SFP+ ports, the DGS-1510 series is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch & edge switch. The DGS-1510 Series Gigabit Stackable Smart Pro Switches with 10G Uplinks

Includes:: a Po E-enable switch for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port Po E Switch that provides 24 Po E-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1510 Series provide functionality, security, & manageability for a fraction of the standard cost of ownership. Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models

...

The DGS-1510 series is the next generation of smart managed switch. It contains 16, 24 or 48 10/100/1000 Mbps ports plus 2 Gigabit SFP ports & 2 10G SFP+ ports, 24/48 10/100/1000 Mbps ports plus 4 10G SFP+ ports, as well as one 24 10/100/1000 Mbps Po E plus 2 Gigabit SFP ports & 2 10G ports smart managed switch. With it's 10G SFP+ ports, the DGS-1510 series is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch & edge switch. ...

The DPS-700 redundant power supply (RPS) is designed to conform to the wattage requirements of D-Link's Ethernet & Gigabit switches. It is external RPS units enclosed in solid metal cases with sockets to AC or DC power sources on one end, & connect to a switch's internal power supply on the other end. It provides a low-cost, simple solution to the problem of an inadvertent failure of the internal power-supply of an Ethernet switch, which can result in the shutdown of that switch, the devices attached to its ports, or an entire network. Supporting full output power for the switch, these redundant power supplies can maximize the power availability of the switching device. ...

The DPS-700 redundant power supply (RPS) is designed to conform to the wattage requirements of D-Link's Ethernet & Gigabit switches. It is external RPS units enclosed in solid metal cases with sockets to AC or DC power sources on one end, & connect to a switch's internal power supply on the other end. It provides a low-cost, simple solution to the problem of an inadvertent failure of the internal power-supply of an Ethernet switch, which can result in the shutdown of that switch, the devices attached to its ports, or an entire network. Supporting full output power for the switch, these redundant power supplies can maximize the power availability of the switching device. ...

The ANT24-0501 is a D-Link Indoor 5d Bi Gain Omni-Directional Antenna. PRODUCT

Features: 360° Horizontal Spread

...

The ANT24-0501C 5d Bi indoor omni-directional antenna can increase the effective wireless operation range of 802.11b & 802.11g wireless devices. Providing 5d Bi peak gain, it can be connected to a wireless access point or router to improve signal transmission & reception in the omni 360 degrees direction & provide point to multi-point wireless signal coverage. Wireless devices with lower Gain detachable antennas can use this antenna to get signal transmission/reception. The ANT24-0501C antenna is equipped with an RP-SMA plug & can be attached to a wireless device equipped with an RP SMA receptacle. To attach the ANT24-0501C simply remove the default detachable antenna from the wireless access point or router, & connect the ANT24-0501C antenna to the RP-SMA receptacle of the wireless device. For wireless devices equipped with RP TNC receptacles, an RP-SMA to RPTNC adapter is provided to facilitate connection. ...

The ANT24-0501C 5d Bi indoor omni-directional antenna can increase the effective wireless operation range of 802.11b & 802.11g wireless devices. Providing 5d Bi peak gain, it can be connected to a wireless access point or router to improve signal transmission & reception in the omni 360 degrees direction & provide point to multi-point wireless signal coverage. Wireless devices with lower Gain detachable antennas can use this antenna to get signal transmission/reception. The ANT24-0501C antenna is equipped with an RP-SMA plug & can be attached to a wireless device equipped with an RP SMA receptacle. To attach the ANT24-0501C simply remove the default detachable antenna from the wireless access point or router, & connect the ANT24-0501C antenna to the RP-SMA receptacle of the wireless device. For wireless devices equipped with RP TNC receptacles, an RP-SMA to RPTNC adapter is provided to facilitate connection. ...

The Just Connect DNR-2060-08P 6-Bay Network Video Recorder is a comprehensive standalone network video display, storage, & management solution providing reliable high-quality remote monitoring for IP-based security systems. The Just Connect DNR-2060-08P enables simultaneous recording & remote access to recorded video as well as live viewing. Controlling the DNR-2060-08P is easy using the conventional front panel controls, or remote control handset or an optional keypad & mouse. The latest multi-megapixel resolution cameras demand a new generation of network recording solutions. The DNR-2060-08P exceeds these demands & adds reliability, scalability, flexibility, ease of use & competitive pricing. You can monitor & store video from your network of cameras & easily find, review & export recorded videos. The DNR-2060-08P

Includes:: a complete surveillance software package that enables you to view, manage & record from up to 8 cameras on a single computer from a central location. Recordings & e-mail alerts can be triggered through motion detection or events triggered by digital input devices, keeping administrators informed of any unusual activity. The DNR-2060-08P has eight built-in IEEE 802.3at compliant Po E ports that enable you to ease camera installation by providing power (up to 90 watts) & networking connectivity with a single cable, reducing the need to drill holes or lay additional cabling. In addition, the included digital input & output connector enables connections to external devices such as IR sensors, switches & alarm relays.

...

The Just Connect DNR-2060-08P 6-Bay Network Video Recorder is a comprehensive standalone network video display, storage, & management solution providing reliable high-quality remote monitoring for IP-based security systems. The Just Connect DNR-2060-08P enables simultaneous recording & remote access to recorded video as well as live viewing. Controlling the DNR-2060-08P is easy using the conventional front panel controls, or remote control handset or an optional keypad & mouse. The latest multi-megapixel resolution cameras demand a new generation of network recording solutions. The DNR-2060-08P exceeds these demands & adds reliability, scalability, flexibility, ease of use & competitive pricing. You can monitor & store video from your network of cameras & easily find, review & export recorded videos. The DNR-2060-08P

Includes:: a complete surveillance software package that enables you to view, manage & record from up to 8 cameras on a single computer from a central location. Recordings & e-mail alerts can be triggered through motion detection or events triggered by digital input devices, keeping administrators informed of any unusual activity. The DNR-2060-08P has eight built-in IEEE 802.3at compliant Po E ports that enable you to ease camera installation by providing power (up to 90 watts) & networking connectivity with a single cable, reducing the need to drill holes or lay additional cabling. In addition, the included digital input & output connector enables connections to external devices such as IR sensors, switches & alarm relays.

...