The MC220L is a media converter designed to convert 1000 Base-SX/LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC/LC-Type connector. It works at 850nm on both transmitting & receiving data when adopting multi-mode fiber & 1310nm on both transmitting & receiving data when adopting single-mode. Other features of this module include the ability to be used as a standalone device (no chassis required) or with TP-Link's 19"system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers & 10 kilometers when utilizing single-mode fiber. ...

The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINKs 19system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers.

...

The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19''system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers.

...

The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19''system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers.

...

The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required)or with TP-LINK's 19''system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.

...

The TL-SM5110-LR is designed to extend transfer distances based on 10 Gbps Ethernet connectivity. It is a 10GBASE-LR high performance 1310 nm single-mode SFP+ transceiver. It supports full duplex, 10G Ethernet connections up to 10 km with 9/125µm fiber cables respectively. ...

The TL-SM5110-SR is designed to extend transfer distances based on 10 Gbps Ethernet connectivity. It is a 10GBASE-SR high performance 850 nm multi-mode SFP+ transceiver. It supports full duplex, 10G Ethernet connections up to 300 m or 33 m with 50/125 µm or 62.5/125 µm fiber cables respectively. ...

The TXM431-SR is designed to extend transfer distances based on 10 Gbps Ethernet connectivity. It is a 10GBASE-SR high performance 850 nm multi-mode SFP+ transceiver. It supports full duplex, 10G Ethernet connections up to 300 m or 33 m with 50/125 µm or 62.5/125 µm fiber cables respectively. ...

Designed for workgroups & departments, TL-SG5412F from TP-LINK provides full set of layer 2 management features. It delivers maximum throughput where you need it
- to high-performance workgroups at the edge of the network, or as an aggregation layer device in business networks. Moreover, TL-SG5412F switch also comes equipped with 4 1000BASE-T ports, giving you greater network flexibility. This TP-LINK L2 managed switch has robust security & management features. An advanced Access Control List (ACL, L2 to L4) & the TP-LINK strong safeguard provide security coverage from core to edge & protect against broadcast storm, ARP & Denial-of-Service (Dos) attacks, etc. Quality of Service (Qo S, L2 to L4) provides enhanced traffic management capabilities to move your data smoother & faster. Anymore, the easy-to-use web management interfaces, along with CLI, SNMP & RMON, mean faster setup & configuration with less downtime. For workgroup & departments requiring cost-sensitive layer 2 switch, & additional Gigabit capability, TP-LINK L2 fully managed Switch TL-SG5412F can provide you the ideal access-edge solution.
...

Designed for workgroups & departments, TL-SG5412F from TP-LINK provides full set of layer 2 management features. It delivers maximum throughput where you need it
- to high-performance workgroups at the edge of the network, or as an aggregation layer device in business networks. Moreover, TL-SG5412F switch also comes equipped with 4 1000BASE-T ports, giving you greater network flexibility. This TP-LINK L2 managed switch has robust security & management features. An advanced Access Control List (ACL, L2 to L4) & the TP-LINK strong safeguard provide security coverage from core to edge & protect against broadcast storm, ARP & Denial-of-Service (Dos) attacks, etc. Quality of Service (Qo S, L2 to L4) provides enhanced traffic management capabilities to move your data smoother & faster. Anymore, the easy-to-use web management interfaces, along with CLI, SNMP & RMON, mean faster setup & configuration with less downtime. For workgroup & departments requiring cost-sensitive layer 2 switch, & additional Gigabit capability, TP-LINK L2 fully managed Switch TL-SG5412F can provide you the ideal access-edge solution.
...