Dock your 2.5" or 3.5" SATA SSDs/HDDs & add USB (Universal Serial Bus) Fast Charge Capacity in a stylish white docking station. The SDOCKU33HW USB (Universal Serial Bus) 3.0 Dock with Fast Charge USB (Universal Serial Bus) hub lets you easily connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 3-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 3 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) host connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, the dock features configurable power management, which reduces energy consumption & helps extend the life of your drives by avoiding unnecessary access. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. With uniform white design & sleek silver trim, the SDOCKU33HW will look great with your Apple Mac. ...

Dock your 2.5" or 3.5" SATA SSDs/HDDs & add USB (Universal Serial Bus) Fast Charge Capacity in a stylish black docking station. The SDOCKU33HB USB (Universal Serial Bus) 3.0 hard drive dock with Fast Charge USB (Universal Serial Bus) hub lets you easily connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 3-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 3 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. Enhanced with UASP, the dock supports up to 70% faster performance than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. ...

Enable fast, swappable access to your 2.5in or 3.5in SATA hard drives, through USB (Universal Serial Bus) 3.0. The SATDOCKU3S USB (Universal Serial Bus) 3.0 Hard Drive Docking Station delivers full, instant access to any 2.5in or 3.5in SATA (SATA, SATA II, SATA III) hard drive (HDD) or solid state drive (SSD), without having to mount the drive in a computer or install it in an external enclosure. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computers storage/backup capabilities. Connected to the host computer through a single USB (Universal Serial Bus) 3.0 Super Speed or USB (Universal Serial Bus) 2.0 connection, the hard drive docking station provides a convenient, plug-&-play storage solution that delivers instant access to the hard drive without requiring a reboot. Relying on the outstanding data throughput support of USB (Universal Serial Bus) 3.0, the HDD docking station is capable of transfer speed up 5 Gbps, making it the quickest way to access data from an external drive. Double the value of this hard drive docking station, using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot. ...

Experience the super speed of USB (Universal Serial Bus) 3.0 to access SATA Hard Drive. The SATDOCKU3SP USB (Universal Serial Bus) 3.0 Hard Drive Docking Station desktop bundle delivers full external access to any bare 2.5in or 3.5in SATA hard drive, without having to mount the drive in an enclosure or install the hard drive within a computer case. A versatile external storage solution, the USB (Universal Serial Bus) 3.0 HDD docking station

Includes:: a 2-port USB (Universal Serial Bus) 3.0 PCIe (PCI Express x 1) adapter card, which adds two USB (Universal Serial Bus) 3.0 connections from the host computer to deliver an all-in-one plug & play storage solution that provides access to the hard drive inserted in the dock without having to reboot the computer. This card is compatible with full & low profile systems with LP4 power connectors. Relying on the outstanding data throughput support of USB (Universal Serial Bus) 3.0, the docking station is capable of data transfer speeds of up to 5 Gbps & is backward compatible with USB (Universal Serial Bus) 2.0/1.1 interface connections (limited to USB (Universal Serial Bus) 2.0/1.1 speeds unless connected through USB (Universal Serial Bus) 3.0). Double the value of this hard drive docking station, using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.

...

Easily connect & hot swap 3.5in SATA III hard drives, through either e SATA or UASP-supported USB (Universal Serial Bus) 3.0. The S3510BMU33ET Removable Hard Drive Enclosure lets you connect a 3.5" SATA hard drive through an available USB (Universal Serial Bus) 3.0 or e SATA port, with a tray-less design that makes hot-swapping easy. For fast performance & efficient data transfers, when connected through e SATA, the enclosure supports full SATA III transfer speeds
- up to 6 Gbps. For universal compatibility, the enclosure can be connected through USB (Universal Serial Bus) 3.0 with transfer speeds up 5 Gbps plus support for UASP, which supports performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. See the UASP testing results below for further details. The HDD enclosure offers a versatile solution for increasing the storage/backup capabilities of your computer, with support for hard drives at capacities of up to 4TB, & the ability to easily hot-swap between drives. Plus, to maximize both durability & reliability, the enclosure features high-quality aluminum construction. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive.
...

Turn a 2.5" SATA III or IDE HDD / SSD into an external hard drive that connects to your computer through USB (Universal Serial Bus) 3.0 with UASP. The UNI251BMU33 Universal 2.5in Drive Enclosure lets you turn a 2.5in SATA or IDE hard drive (HDD) or solid-state drive (SSD) into a portable USB (Universal Serial Bus) 3.0 storage solution. This versatile enclosure offers a simple solution for re-purposing 2.5in HDDs & SSDs that are no longer in use into convenient external storage. Since the enclosure supports either legacy IDE or SATA drives, you can rest assured that you'll have the correct option on-hand when it's time to swap another drive in, without having to worry about compatibility. To get the most from your SATA III drives & ensure maximum performance & speed, the UNI251BMU33 is enhanced with UASP support. When paired with a UASP-enabled host controller, the enclosure delivers transfer speeds up to 70% faster than conventional USB (Universal Serial Bus) 3.0. Perfect for carrying your external drive along with your laptop, the UNI251BMU33 is USB (Universal Serial Bus)-powered, so you won't need to carry around an external power adapter. Plus, the enclosure features a small-footprint design, making it a great solution for on-the-go laptop & desktop users who want to add storage to their computer without taking up much space. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Turn a 2.5" SATA III or IDE HDD / SSD into an external hard drive that connects to your computer through USB (Universal Serial Bus) 3.0 with UASP. The UNI251BMU33 Universal 2.5in Drive Enclosure lets you turn a 2.5in SATA or IDE hard drive (HDD) or solid-state drive (SSD) into a portable USB (Universal Serial Bus) 3.0 storage solution. This versatile enclosure offers a simple solution for re-purposing 2.5in HDDs & SSDs that are no longer in use into convenient external storage. Since the enclosure supports either legacy IDE or SATA drives, you can rest assured that you'll have the correct option on-hand when it's time to swap another drive in, without having to worry about compatibility. To get the most from your SATA III drives & ensure maximum performance & speed, the UNI251BMU33 is enhanced with UASP support. When paired with a UASP-enabled host controller, the enclosure delivers transfer speeds up to 70% faster than conventional USB (Universal Serial Bus) 3.0. Perfect for carrying your external drive along with your laptop, the UNI251BMU33 is USB (Universal Serial Bus)-powered, so you won't need to carry around an external power adapter. Plus, the enclosure features a small-footprint design, making it a great solution for on-the-go laptop & desktop users who want to add storage to their computer without taking up much space. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Convert your USB (Universal Serial Bus) 3.0 port into a mini docking adapter, adding Gigabit Ethernet & HDMI video output to your Laptop. The USB31GEHD USB (Universal Serial Bus) 3.0 Mini Docking Station Adapter lets you add Gigabit Ethernet & HDMI connection ports to your Ultrabook, laptop, or desktop through a single USB (Universal Serial Bus) 3.0 host, giving you two connectivity ports that arent always available on modern mobile computers. Providing full Gigabit bandwidth for faster network connections, this adapter leverages the 5 Gbps capabilities of the USB (Universal Serial Bus) 3.0 interface to support 10/100/1000 Mbps Ethernet & is fully compatible with IEEE 802.3/u/ab standards. Plus, the Gigabit adapter functions as an external graphics card, letting you add an external monitor in addition to your laptop display, with 1920x 1200 video & 5.1 surround sound audio (from HDMI port only). An ideal multi-port combo adapter for mobile or stationary environments with no external power adapter required, this USB (Universal Serial Bus)-Powered adapter is the perfect laptop accessory that tucks neatly into your travel bag with a compact & portable design. The mini docking station adapter offers backward compatibility with USB (Universal Serial Bus) 2.0 systems (speed limited by USB (Universal Serial Bus) bus), & features quick & easy installation for Windows & Mac operating systems. ...

Add the Ability to Use Multiple Types of Flash Memory Cards, Including Compact Flash?, Secure Digital? & Memory Stick? Cards. The FCREADHCU3 USB (Universal Serial Bus) 3.0 Card Reader enables easy read/write access to a variety of popular flash memory card formats/types (Compact Flash?, Secure Digital?, Memory Stick?) in a single unit, over a high speed USB (Universal Serial Bus) 3.0 connection. Using a connection over USB (Universal Serial Bus) 3.0, which is up to 10 times faster than the USB (Universal Serial Bus) 2.0 standard, makes transferring large data files much quicker; it (USB 3.0) is still backward compatible with USB (Universal Serial Bus) 2.0 however, ensuring compatibility with older systems. This compact & lightweight external card reader offers a portable, convenient solution for accessing many different types of Flash Memory/ Media cards & is easy to use, with no driver or software installation required. ...

Add the Ability to Use Multiple Types of Flash Memory Cards, Including Compact Flash?, Secure Digital? & Memory Stick? Cards. The FCREADHCU3 USB (Universal Serial Bus) 3.0 Card Reader enables easy read/write access to a variety of popular flash memory card formats/types (Compact Flash?, Secure Digital?, Memory Stick?) in a single unit, over a high speed USB (Universal Serial Bus) 3.0 connection. Using a connection over USB (Universal Serial Bus) 3.0, which is up to 10 times faster than the USB (Universal Serial Bus) 2.0 standard, makes transferring large data files much quicker; it (USB 3.0) is still backward compatible with USB (Universal Serial Bus) 2.0 however, ensuring compatibility with older systems. This compact & lightweight external card reader offers a portable, convenient solution for accessing many different types of Flash Memory/ Media cards & is easy to use, with no driver or software installation required. ...