Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB (Universal Serial Bus) 3.0 or e SATA for easy access. The SDOCK2U33RE Dual 2.5/3.5" SATA HDD/SSD duplicator dock lets you duplicate/clone an existing hard drive without the use of a host computer system
- or dock & swap drives from your desktop or laptop computer simultaneously, using a single USB (Universal Serial Bus) or e SATA port. The SDOCK2U33RE offers convenient dual-function performance. As a hard drive duplicator, the SDOCK2U33RE lets you create an exact sector-by-sector clone from one hard drive to another, including partitions & boot sector information
- ensuring data integrity & consistency for sensitive operations, such as data recovery. As an external hard drive dock the SDOCK2U33RE lets you connect your drives through either e SATA or USB (Universal Serial Bus), with each drive slot individually supporting high capacity 2.5/3.5" hard drives or solid state drives, tested up to 4 TB. With support for SATA III (6 Gbps) you can maximize efficiency with duplication speeds up to 22 GB per minute, & e SATA docking speeds up to 6 Gbps. The Dock can also be connected through USB (Universal Serial Bus) 3.0 with UASP for transfer speeds up 5 Gbps (70% faster than conventional USB (Universal Serial Bus) 3.0). With push button operation & plug-and play installation, the duplicator dock has been specially designed for hassle-free operation. The SDOCK2U33RE lets you quickly dock your hard drives or start duplicating hard drives with the push of a button. Plus, the built-in LED progress bar saves you time by letting you easily monitor the entire duplication process, so you'll know exactly when it's time to start your next operation. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read spe

...

Turn 2 SATA hard drives into external RAID storage, connected through USB (Universal Serial Bus) 3.0. The SAT3520U3SR USB (Universal Serial Bus) 3.0 RAID Enclosure turns two 3.5" SATA (SATA I, SATA II, SATA III) hard drives into an external RAID array through a USB (Universal Serial Bus) 3.0 connection. Large capacity drives (tested with up to 4 TB per bay) can be used to greatly enhance your computer storage/backup capabilities. Whether its greater capacity or data redundancy youre looking for, this USB (Universal Serial Bus) 3.0 dual drive enclosure is the solution, with built-in support for multiple RAID modes (RAID 0, 1, JBOD) which enables the enclosure to fit the role you need. The drive enclosure also supports non-RAID operation, so both drives can be used independent. Compliant with the Super Speed USB (Universal Serial Bus) 3.0

Specification, which can provide up to 5 Gbps of data bandwidth (10x more than USB (Universal Serial Bus) 2.0), the SAT3520U3SR RAID enclosure makes it easier & faster to transfer or stream large amounts of data. Although the dual drive enclosure will perform at peak speeds when connected to a USB (Universal Serial Bus) 3.0 host computer, it is also more than suitable for use with older systems, as it is backward compatible with USB (Universal Serial Bus) 2.0 connections.

...

The 35BAYUSB3S4 3.5-inch Front Bay to 4-Port USB (Universal Serial Bus) 3.0 Panel Hub turns any available 3.5-inch computer case front bay into a 4-Port USB (Universal Serial Bus) 3.0 hub. Using only a single USB (Universal Serial Bus) connection, this front panel hub adds four easily accessible USB (Universal Serial Bus) ports to the front of your computer case through a 3.5-inch bay, or through a 5.25-inch bay using the optional Front Bay Bracket Adapter (BRACKETFDBK) accessory. Each of the added ports is compliant with the USB (Universal Serial Bus) 3.0 standard which supports up to 5 Gbps of bandwidth (10x faster than the USB (Universal Serial Bus) 2.0 standard) & up to 900m A of power. Accessorize with the PEXUSB3S11 PCI Express card to provide an internal USB (Universal Serial Bus) 3.0 port, so as to keep the external ports free for external devices. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. The Star Tech.com Advantage Connect up to four USB (Universal Serial Bus) 3.0/2.0/1.x devices simultaneously, through your computers front 3.5" bay Super Speed USB (Universal Serial Bus) 3.0 supports up to 5 Gbps of bandwidth & up to 900m A of power per port to support faster & more powerful devices Backed by a Star Tech.com 2-year warranty & free lifetime technical support Features Four front accessible USB (Universal Serial Bus) type-A ports Fits into any 3.5" computer case front bay Super Speed USB (Universal Serial Bus) 3.0 compliant, supporting data transfer rates up to 5 Gbps Backward compatible with USB (Universal Serial Bus) 2.0 & USB (Universal Serial Bus) 1.0/1.1 specifications & devices Provides up to 900m A of power per port USB (Universal Serial Bus) Link LED indicator for each port Applications Expand your systems USB (Universal Serial Bus) 3.0 capabilities with additional ports for connecting high speed external storage devices Add easier to access USB (Universal Serial Bus) ports to the front of a computer system instead of the rear Make use of an internal USB (Universal Serial Bus) port & unused 3.5" front bay to increase the systems expandability ...

Add dual-band Wireless-AC connectivity to a desktop or laptop computer through USB (Universal Serial Bus) 3.0. The USB867WAC22 USB (Universal Serial Bus) 3.0 AC1200 Wireless Network Adapter lets you add Wireless-AC connectivity to a desktop or laptop computer through USB (Universal Serial Bus) 3.0. With network applications like streaming HD video, online conferencing, file transfers & gaming becoming more demanding, this Wireless-AC adapter gives you exceptional speed & range for your office or home wireless network when paired with an 802.11ac router. The dual band Wi Fi adapter supports maximum data rates of up to 867 Mbps on the 5 G Hz band (3x the speed of Wireless-N), plus up to 300 Mbps on the 2.4 G Hz b&. This versatile network card features a 2T2R (2 transmitter, 2 receiver) antenna design, with a physical WPS button for secure, one-touch device registration. To integrate with all of your networking devices, the adapter is also backward compatible with 802.11a/b/g/n networks. ...

Add dual-band Wireless-AC connectivity to a desktop or laptop computer through USB (Universal Serial Bus) 3.0. The USB867WAC22 USB (Universal Serial Bus) 3.0 AC1200 Wireless Network Adapter lets you add Wireless-AC connectivity to a desktop or laptop computer through USB (Universal Serial Bus) 3.0. With network applications like streaming HD video, online conferencing, file transfers & gaming becoming more demanding, this Wireless-AC adapter gives you exceptional speed & range for your office or home wireless network when paired with an 802.11ac router. The dual band Wi Fi adapter supports maximum data rates of up to 867 Mbps on the 5 G Hz band (3x the speed of Wireless-N), plus up to 300 Mbps on the 2.4 G Hz b&. This versatile network card features a 2T2R (2 transmitter, 2 receiver) antenna design, with a physical WPS button for secure, one-touch device registration. To integrate with all of your networking devices, the adapter is also backward compatible with 802.11a/b/g/n networks. ...

Connect two 3.5" SATA III hard drives to your computer through USB (Universal Serial Bus) 3.0 with UASP in a RAID array, & charge or connect USB (Universal Serial Bus) devices with the built-in 2-port USB (Universal Serial Bus) 3.0 fast charge hub. The S352BU33HR 2-Bay RAID Enclosure lets you build an external RAID array using two 3.5" SATA hard drives, & add it to your computer through USB (Universal Serial Bus) 3.0. For optimal performance from your SATA III drives, the external RAID enclosure supports a UASP-enabled USB (Universal Serial Bus) 3.0 host connection, which performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP compatible host controller. The RAID enclosure also lets you connect additional USB (Universal Serial Bus) 3.0 devices to your computer, through an integrated 2-port USB (Universal Serial Bus) 3.0 hub conveniently mounted on the front of the enclosure. The easy-to-reach hub also has fast charging capabilities, so you can charge your iPad, smartphone or other mobile devices as quickly as you would through a direct wall outlet connection. To help maintain safe operating temperatures for your hard drives, the 2-drive enclosure features a built-in cooling fan to ensure proper air circulation & prevent your SATA drives from over-heating. The enclosure features an integrated hardware RAID controller, which gives you the options you need to set up the array that best suits your storage application, including JBOD, Spanning, RAID 0, & RAID 1. To ensure compatibility with your computer system, the S352BU33HR supports all of the leading operating systems. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. ...

Connect two 3.5" SATA III hard drives to your computer through USB (Universal Serial Bus) 3.0 with UASP in a RAID array, & charge or connect USB (Universal Serial Bus) devices with the built-in 2-port USB (Universal Serial Bus) 3.0 fast charge hub. The S352BU33HR 2-Bay RAID Enclosure lets you build an external RAID array using two 3.5" SATA hard drives, & add it to your computer through USB (Universal Serial Bus) 3.0. For optimal performance from your SATA III drives, the external RAID enclosure supports a UASP-enabled USB (Universal Serial Bus) 3.0 host connection, which performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP compatible host controller. The RAID enclosure also lets you connect additional USB (Universal Serial Bus) 3.0 devices to your computer, through an integrated 2-port USB (Universal Serial Bus) 3.0 hub conveniently mounted on the front of the enclosure. The easy-to-reach hub also has fast charging capabilities, so you can charge your iPad, smartphone or other mobile devices as quickly as you would through a direct wall outlet connection. To help maintain safe operating temperatures for your hard drives, the 2-drive enclosure features a built-in cooling fan to ensure proper air circulation & prevent your SATA drives from over-heating. The enclosure features an integrated hardware RAID controller, which gives you the options you need to set up the array that best suits your storage application, including JBOD, Spanning, RAID 0, & RAID 1. To ensure compatibility with your computer system, the S352BU33HR supports all of the leading operating systems. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish black docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFB USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the each other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPads & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing eas ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish white docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFW USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 2 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPads & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy ...

Expand your laptop connectivity by adding two displays, with HDMI & DVI or HDMI & VGA, plus six USB (Universal Serial Bus) ports & a Gigabit Ethernet port, all through a single USB (Universal Serial Bus) 3.0 port. This USB (Universal Serial Bus) 3.0 dual-monitor docking station lets you add the ports you need to your laptop, to maximize your workstation performance. The laptop dock provides a cost-effective universal docking solution, with support for HDMI & DVI monitors & plenty of connection options for peripherals. The versatile laptop docking station enables you to improve your efficiency & productivity by expanding the display capabilities of your Windows laptop or Mac Book. Set up dual displays by connecting to one HDMI & one DVI monitor. Plus, the dock

Includes:: a DVI to VGA adapter, so you can connect your legacy VGA monitor in place of a DVI monitor. With the dual-monitor dock, you can connect: 1x HDMI display + 1x DVI display at 2048 x 1152 resolution @ 60 Hz; 1x HDMI display at 2048 x 1152 resolution + 1x VGA display at 1920 x 1200 resolution @ 60 Hz. The USB (Universal Serial Bus) 3.0 docking station offers a fast & easy way to maximize your laptop's workable screen space, giving you three screens in total when coupled with your laptop's display. This USB (Universal Serial Bus) docking station lets you easily connect your keyboard, external drives & other peripherals, to transform your laptop into a powerful, fully capable workstation. The dock features a USB (Universal Serial Bus) Type-B dock connection (host) for more robust port stability, unlike the Micro-B ports that are often used on other docking stations. From the single USB (Universal Serial Bus) 3.0 host connection, the dock provides six USB (Universal Serial Bus) 3.0 (Type-A) ports, a Gigabit Ethernet port, plus a 3.5 mm audio headphone port. Two of the USB (Universal Serial Bus) 3.0 ports are always-on fast-charging ports, adding charge-&-sync flexibility for up to two mobile devices. The compact, horizontal design of the laptop docking station makes it easy to position on your desk, alongside your other devices & peripherals. It's an attractive addition to any w

...