Connect a 2.5in or 3.5in SATA hard drive to your computer through USB (Universal Serial Bus) 3.0 or e SATA. The SATDOCKU3E USB (Universal Serial Bus) 3.0/e SATA to SATA Hard Drive Docking Station provides quick & easy access to a 2.5in or 3.5in SATA hard disk drive (HDD) or solid state drive (SSD) through either e SATA or USB (Universal Serial Bus) connectivity, making it compatible with almost any system. The HDD docking station supports large capacity drives (tested with up to 4 TB 3.5" & 1 TB 2.5" drives), which enables you to greatly enhance your computers storage/backup capabilities. The hard drive dock offers e SATA or USB (Universal Serial Bus) 3.0 host connections (3 Gbps, 5 Gbps bandwidth respectively), & is backward compatible with USB (Universal Serial Bus) 2.0 (up to 480 Mbps) connections to the host computer. To simplify HDD installation & swapping drives in & out of the dock, the SATDOCKU3E features a top slot-loading design, for easy access. ...

Turns any 3.5in SATA hard drive into a rugged, hot-swap storage solution for a 5.25in bay. This high quality Removable SATA Hard Drive Drawer/ Mobile Rack delivers a professional-grade hot-swap solution, allowing you to quickly swap SATA hard drives in/out of a computer without having to open the computer case. The mobile rack is fully compatible with RAID installations to ensure maximum performance & versatility for enhanced storage applications. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. Simply install the drive bay into a 5.25in bay on the host computer, then mount a 3.5in SATA HDD into the (removable) caddy. Connecting the SATA hard drive to the computer is as easy as inserting the caddy into the drive bay, which can be locked to prevent unauthorized removal of the drive. Features a front panel ball bearing fan, aluminum construction & 25K insertion rating. This product is interchangeable as a replacement for Stor Case SATA models S21J111, SC21J111 & RJR110. ...

The PATA2SATA3 is a bi-directional SATA IDE adapter/converter that lets you connect a Serial ATA drive to a legacy IDE port, or an IDE drive to a SATA motherboard port. A cost-effective solution for upgrading existing IDE systems to support SATA hard drives or optical drives, the SATA/IDE adapter eliminates the expense of having to purchase a controller card while saving the expansion slot that would be required for card installation. In addition to SATA hard drive installation, the adapter can be reversed in order to connect older IDE drives to a newer SATA-enabled motherboard, making it easy to retrieve old files from a previous system. Star Tech Advantage
- A single, versatile adapter can be used to connect an IDE device to a SATA motherboard or vice-versa without any drivers or software installation
- Supports not only hard drives, but CD/DVD optical drives as well
- Backed by a Star Tech.com 1 year warranty & free lifetime technical support


...

This 2-port SATA III (6 Gbps) controller enables you to add two SATA 6 Gbps Hard Drives (HDDs) or Solid State Drives (SSDs) to your computer system or server via an available PCIe x 1 card slot. The card supports SATA III & PCI-Express 2.0 Specifications. ...

The PEXSAT32 2-Port PCI Express SATA 6 Gbps (SATA 3.0) Controller Card offers simple connectivity between a host computer & SATA 3.0 devices
- a cost-effective solution for connecting high-speed storage, such as High RPM Hard Drives & Solid State Drives (SSD), which in turn allows for easier data backups & archiving. With full support for SATA 3.0 hard drives & data transfer speeds of up to 6 Gbps, the adapter card features a native PCI Express single chipset that provides enhanced compatibility, reliability & performance for external SATA 600 MB/s storage needs. The controller card is backward compatible with SATA 2.0 devices, providing the versatility to use older storage, & features support for RAID 0 & 1 modes as well as port multiplier capability with comm&-based & FIS-based switching for connecting multiple external hard drives to a host PC through a single SATA connection. A dual profile solution, the SATA 3.0 controller card

Includes:: a low profile/half-height bracket for installation in slimline or small form factor computer cases.


...

Make a left side-angled connection to your SATA drive, for installation in narrow spaces. The SATA12LSA1 Left Side-Angled SATA Cable (12-inch) features one straight & one left side-angled (7-pin) data receptacle, which positions the cable so that it runs parallel to the drive ports
- ideal for connectivity in narrow spaces, enabling installation of the drive as needed within the system case. The cable also features a flexible low profile design that helps improve airflow & reduce clutter in your computer case, which helps keep the case clean & cool. Constructed of only finest top quality materials & designed for optimum performance & reliability this 12" SATA cable supports full SATA 3.0 bandwidth (up to 6 Gbps) when used with SATA 3.0 compliant drives.
...

Make a left side-angled connection to your SATA drive, for installation in narrow spaces. The SATA18LSA1 Left Side-Angled SATA Cable (18-inch) features one straight & one left side-angled (7-pin) data receptacle, which positions the cable so that it runs parallel to the drive ports
- ideal for connectivity in narrow spaces, enabling installation of the drive as needed within the system case. The cable also features a flexible low profile design that helps improve airflow & reduce clutter in your computer case, which helps keep the case clean & cool. Constructed of only finest top quality materials & designed for optimum performance & reliability this 18" SATA cable supports full SATA 3.0 bandwidth (up to 6 Gbps) when used with SATA 3.0 compliant drives.
...

The SATDOCK2520 3.5in SATA Mobile Rack lets you install two 2.5in SATA drives (SATA, SATA II, SATA III-6 Gbps) into an available/unused 3.5in floppy drive bay. The mobile rack delivers quick & easy access to hard drive contents, using a convenient "no mounting required /easy eject" feature (much like a tape cartridge or floppy disk) that eliminates the need for the drives to be installed in a tray
- a time-saving solution for instant drive removals & insertions as part of a system building process or integration into rackmount systems or industrial environments. For added security, the mobile rack is equipped with locking bay doors to prevent unauthorized removal of the swappable hard drives. Also a perfect addition for operating system image deployment & any task that requires being able to access large volumes of data on the fly, the hot swap bay provides everything you need to expedite important projects while maintaining a reliable storage solution.
...

Easily connect & swap two 2.5in SATA hard drives or SSDs through a single 3.5in front bay. The HSB225SATBK 3.5in SATA Mobile Rack lets you install two 2.5in SATA (SATA, SATA II, SATA III-6 Gbps) hard drives (HDD) or solid state drives (SSD) into an available/unused 3.5in floppy drive bay. The mobile rack delivers quick & easy access to hard drive contents, using a convenient "no mounting required/easy eject" feature which eliminates the need for the drives to be installed in a tray
- a time-saving solution for instant drive removals & insertions, as part of a system building process or integration into rackmount systems or industrial environments. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. For added safety, the mobile rack is made from UL94 V-0 rated plastics & equipped with locking bay doors to help prevent accidental or unauthorized removal of the swappable hard drives. Also a perfect addition for operating system image deployment & any task that requires being able to access large volumes of data on the fly, the hot swap bay provides everything you need to expedite important projects while maintaining a reliable storage solution.
...

Connect any SATA device to your development board, to increase its data storage capacity & performance. Increase the data storage capacity of your Raspberry Pi or other development board, by connecting it directly to a SATA-based drive. Perfect for custom projects & applications, this USB (Universal Serial Bus) to SATA converter supports all models of Raspberry Pi as well as other development boards. This convenient USB (Universal Serial Bus) 2.0 SATA converter lets you overcome data storage limitations by enabling you to connect a SATA drive or SATA optical drive through your board's USB (Universal Serial Bus)-A port. This enables you to access a wide variety of storage formats including solid-state drives or hard drives, DVD-ROM drives or CD-ROM drives. The USB (Universal Serial Bus) to SATA converter integrates seamlessly with your existing development board. It's the perfect addition for development-board based applications such as surveillance, media players & servers, digital signage & Io T/automation solutions. Compatible with SATA I, SATA II & SATA III drives, the converter is easy to install, & doesn't require any device driver installation. It comes with a USB (Universal Serial Bus) cable & all mounting accessories, including standoffs, so integrating it with your Raspberry Pi is fast & easy. ...