The PCIX1PEX4 PCI-X to x 4 PCI Express Adapter lets you install a low profile/half-height x 4 PCI Express card into a full height PCI-X (3.3V, 64-bit) slot on a server or other high-end motherboard. With a physical x 16 PCI Express female slot connector, the PCI-X to PCIe adapter card accepts all types of x 16/x 8/x 4/x 1 physical PCI Express cards (maximum speed of x 4), allowing an older system to run the newest cards. ...

The PCIX1PEX4 PCI-X to x 4 PCI Express Adapter lets you install a low profile/half-height x 4 PCI Express card into a full height PCI-X (3.3V, 64-bit) slot on a server or other high-end motherboard. With a physical x 16 PCI Express female slot connector, the PCI-X to PCIe adapter card accepts all types of x 16/x 8/x 4/x 1 physical PCI Express cards (maximum speed of x 4), allowing an older system to run the newest cards. ...

Add a 10/100/1000 Mbps Ethernet port to any PC through a PCI Express slot. This PCI Express based Gigabit Ethernet Network Adapter Card offers a versatile solution that allows servers & desktop PCs to connect to a Gigabit network through a PCIe slot, providing full Gigabit bandwidth capacity with the dedicated bandwidth of the connected PCI Express bus to provide dependable connectivity. Fully compliant with the 10/100/1000 Mbps IEEE 802.3

Specification, this PCIe Gigabit NIC provides a maximum transfer speed of 1000 Mbps (bidirectional
- 2000 Mbps total)
- ensuring a high performance network connection. This adapter also offers 10/100/1000 Mbps data rate auto-negotiation & full duplex operation that helps to optimize connection speeds & provide efficient performance. The network adapter is compatible with Linux, Windows 2000, XP, XP-64bit, Server 2003, Server 2003-64-bit, Vista, Vista-64, 7, 7-64bit operating systems &

Includes:: full-height & low profile screw-on brackets for installation in standard, small/micro form factor computer cases as well as 1U & 2U servers.





...

Scale your network performance using the 10 Gb SFP+ transceiver of your choice & connect your PCIe-enabled server to a 10 Gigabit fiber network. The PEX10000SFP 10 Gigabit Fiber Network Card is a cost-effective solution that delivers fast & reliable 10 Gbps network access at longer distances than copper-based networks. Using the SFP+ transceiver of your choice, you can connect your PCI Express-based server or workstation directly to your 10G fiber optic network. With the rising strain on network resources due to large file transfers, multimedia content, & an increase in network users, more bandwidth is often required at various levels of your networking infrastructure. With up to 10 Gbps bandwidth, this fiber NIC lets you transfer more data at faster speeds, & is an ideal low-cost addition to your server or high-powered workstation. The PEX10000SFP adapts to your network fiber connection & distance requirements to offer flexible configuration via an open SFP+ slot, & is compatible with most 10 Gb E SFP+ transceivers. With broad SFP+ compatibility this cost-effective fiber card lets you use your preferred SFP+ module, giving you more options to connect your computer directly to a fiber network at greater distances. For enhanced operating efficiency, the PEX10000SFP features an energy-efficient Tehuti TN4010 chipset that offers significantly reduced power consumption versus most comparable cards, including the Intel 82599 chipset cards. Superior power efficiency also helps minimize heat generated by the card, in turn avoiding an increase in the operating temperature within your server case. This versatile 10 Gbps network card offers 16K Jumbo Frame & 802.1q VLAN tagging support, as well as compatibility with VMWare ESXi 5.0/5.1, Microsoft Hyper-V virtualization software, & i SCSI support to combine LAN & SAN functions. ...

Scale your network performance using the 10 Gb SFP+ transceiver of your choice & connect your PCIe-enabled server to a 10 Gigabit fiber network. The PEX10000SFP 10 Gigabit Fiber Network Card is a cost-effective solution that delivers fast & reliable 10 Gbps network access at longer distances than copper-based networks. Using the SFP+ transceiver of your choice, you can connect your PCI Express-based server or workstation directly to your 10G fiber optic network. With the rising strain on network resources due to large file transfers, multimedia content, & an increase in network users, more bandwidth is often required at various levels of your networking infrastructure. With up to 10 Gbps bandwidth, this fiber NIC lets you transfer more data at faster speeds, & is an ideal low-cost addition to your server or high-powered workstation. The PEX10000SFP adapts to your network fiber connection & distance requirements to offer flexible configuration via an open SFP+ slot, & is compatible with most. With broad SFP+ compatibility this cost-effective fiber card lets you use your preferred SFP+ module, giving you more options to connect your computer directly to a fiber network at greater distances. For enhanced operating efficiency, the PEX10000SFP features an energy-efficient Tehuti TN4010 chipset that offers significantly reduced power consumption versus most comparable cards, including the Intel 82599 chipset cards. Superior power efficiency also helps minimize heat generated by the card, in turn avoiding an increase in the operating temperature within your server case. This versatile 10 Gbps network card offers 16K Jumbo Frame & 802.1q VLAN tagging support, as well as compatibility with VMWare ESXi 5.0/5.1, Microsoft Hyper-V virtualization software, & i SCSI support to combine LAN & SAN functions. ...

PCI-Express 2.0
- RS-232 Serial
- IEEE 1284 Parallel
- Lifetime Warranty This PCIe Parallel & Serial Combo Card installs


...

Add serial communication support to your desktop computer or Small Form Factor (SFF) system, using this two-port serial card. RS-232 (DB9) support enables control & communication with a serial peripheral device. ...

Add an e SATA port to a desktop computer through a PCI Express slot. This e SATA Controller Card turns a PCI Express (1x) slot into an external SATA port, to provide a quick & hassle-free external storage solution. Supporting SATA 300 (SATA II) hard drives (backward compatible with SATA /150) & data transfer rates of up to 3 Gbps, this PCI Express e SATA Controller Card is the perfect solution for upgrading existing e SATA capability, or simply adding an external SATA port to a PC desktop computer. Using a native PCI Express single chipset, the controller card provides enhanced compatibility, reliability & performance for your external storage needs. The controller card also features port multiplier support with command based switching for connecting multiple external hard drives to a host computer through one e SATA connection. The PCI Express e SATA Controller Card also features an internal SATA port, which could be used for a conventional (internal) SATA drive installation. Please note that the internal SATA port can not be used at the same time as the external SATA port. ...

Get high performance connectivity over multi-mode fiber, by upgrading your server or workstation with a 10 G Base-SR port. This fiber optic network card delivers reliable, high-performance network connectivity, providing an easy & cost-effective way to upgrade your server or workstation to 10 Gigabit networking over multimode fiber. The 10G network card comes with an installed multimode SFP+ transceiver with up to 330 m range, to get you up & running quickly. Increasing numbers of network users & data-intensive applications, such as multimedia streaming & large file transfers, all drive the need to increase the bandwidth capability of your network infrastructure. This fiber NIC lets you take advantage of the increased speed & stability of a 10 Gigabit network, with data transfers of up to 10 Gbps & up to 20 Gbps (full duplex) bandwidth. For added convenience, this single-port 10G network card comes with an installed multimode SFP+ transceiver. Built to ensure reliable performance, the 10 Gb E SFP+ is manufactured by Star Tech.com to meet or exceed OEM specifications & comply with the industry's MSA (Multi-Source Agreement) standards. The 10 G Base-SR SFP+ delivers 10 Gigabit connectivity over multimode fiber cable with a range of up to 330 m (1082 ft). The 10 Gigabit network card features the Intel 82599 chipset, delivering the power, performance & enhanced capabilities you need for reliable network connections to your server or computer. The Intel chip offers many advanced features including Intel Virtualization Technology for Connectivity, PXE network boot support & up to 15K jumbo frame support. The 10G NIC connects easily through an available PCI Express expansion slot, & is compliant with PCIe Rev. 2 x 8 (or higher). The network card comes with a standard profile, & also

Includes:: a low-profile bracket, for versatile installation.

...

Add a 10/100/1000 Mbps Ethernet port to any PC through a PCI Express slot. The ST1000SPEX2 PCIe Gigabit Ethernet Network Card adds a 10/100/1000 Mbps compatible RJ45 Ethernet port to a PCI Express-enabled client, server or workstation, providing a convenient addition or replacement networking interface. Compliant with IEEE 802.3/u/ab standards, & with support for Jumbo Frames, VLAN tagging & Wake on LAN (WOL), this versatile Gigabit NIC/ Server Adapter delivers rock-solid performance. Plus, the card

Includes:: both full profile & low profile/half-height installation brackets for installation in a wide range of computer/server chassis, regardless of form factor.

...