Connect four video sources to a remote HDMI display over CAT5/CAT6 cabling, & easily scale & switch between HDMI, DP or VGA video sources. This multi-input HDBase T extender kit extends your A/V signals to a remote location up to 230 ft. (70 m) away. It features a built-in switch & scaler, so you can choose which video source is output from four independent video sources (2 x HDMI, 1 x VGA & 1 x Display Port). The HDBase T extender's built-in converter switch lets you connect two HDMI sources, a VGA source, & a DP source to the same remote & local HDMI display. You don't need adapters or scalers, or a video switch. Along with manually switching your video source with easy-to-use buttons, the video extender ensures hassle-free operation with two auto-switching modes: auto-detect switching, which detects & selects a newly connected device, & priority selection, which lets you choose which port is activated by default, for automatic switching. This HDBase T extender features a built-in scaler that scales the image to 1080p, so you can rest assured your HDMI display will intuitively work with any source that's connected through it. Scaling is easy to do, with an intuitive OSD that's accessible using buttons on the remote receiver. Newer HDMI displays no longer support legacy resolution video signals. Without support for these common VGA resolutions, your source may not work with your new HDMI display. The extender kit maintains your HD picture quality, even at 230 ft. (70 m) away from your video source, ensuring you can provide the best possible viewing experience.