This industrial 5-port gigabit Po E switch (4-port Po E) features 30W of power & is designed to be installed in harsh environments & supports up to a total of 120W power outputs. ...

Easily deploy or scale your network with this Gigabit Ethernet switch, features four dedicated Po E+ enabled ports, & one dedicated open SFP slot plus the flexibility of a switchable SFP port for use as an uplink or for non-Po E devices. ...

Easily deploy or scale your network with this Gigabit Ethernet switch, it features four dedicated Po E+ enabled ports, & one dedicated open SFP slot plus the flexibility of a switchable RJ-45/open SFP port for use as an uplink or for non-Po E devices. It features an IP-30 housing, compact design, & is wall & DIN rail mountable. ...

This industrial 8-port gigabit Po E switch features 30W of power & is designed to be installed in harsh environments. ...

This media converter features an open SFP slot for any standard SFP to be used for the incoming fiber connection & is easily deployed across applications or fiber cable types. Accepts terminal block power or coaxial power connectors with the barrel plug adapter, allowing the product to be hardwired or powered using an external power supply (not included), which does not require professional installation. It can be powered using 18V-36V AC or 12V -56V DC for a high degree of flexibility including applications like solar, automotive, & rail.

Includes:: hardware for DIN rail or wall mounting.

...

This Gigabit Power over Ethernet (Po E+) injector supplies power & data connectivity to a Gigabit Po E-compliant device using a standard Ethernet cable. ...

Splits a Po E connection into separate data (RJ45) & DC power (terminal block) that can power any device that uses DC power between 12V-48VDC (1.5A). Power non-Po E devices using network infrastructure, where power is not available. ...

This industrial grade 10/100 Multi Mode Fiber Ethernet Industrial Media Converter converts between 10 Base-T or 100 Base-TX electrical Ethernet signals & 100 Base-FX optical Ethernet signals to provide a simple & cost-effective way to connect two Cat 5 Ethernet network segments together using multimode fiber cable. Ideal for even the harshest environments, the converter is IP30 Rated, & supports connection distances of up to 2km (between converters). ...

This industrial grade 10/100 Multi Mode Fiber Ethernet Industrial Media Converter converts between 10 Base-T or 100 Base-TX electrical Ethernet signals & 100 Base-FX optical Ethernet signals to provide a simple & cost-effective way to connect two Cat 5 Ethernet network segments together using multimode fiber cable. Ideal for even the harshest environments, the converter is IP30 Rated, & supports connection distances of up to 2km (between converters). ...

Convert an RS232 data signal to either RS485 or RS422 with this wall-mountable, ESD-protected adapter. The IC232485S Industrial RS232 to RS-422/485 Serial Converter is a bi-directional adapter that lets you adapt an RS232 data signal to either RS485 (2 or 4-wire) or RS422 & vice-versa, with support for baud rates up to 921.6 Kbps. Ideal for industrial environments, the serial port converter provides 15KV ESD protection on all signal pins to protect costly & often sensitive control equipment against electrical damage. The serial converter also features a sturdy wall-mountable metal housing with Power, Tx & Rx LED indicators for simple status monitoring. The adapter supports auto baud rate detection as well as RS-422 & RS485 mode detection, with an integrated dip switch for manual mode selection if needed, & supports connection distances of up to 4000ft (1200m). ...