Connect both IDE & SATA hard drives using top slot-loading bays through USB (Universal Serial Bus) 3.0. The UNIDOCK3UGB USB (Universal Serial Bus) 3.0 to SATA/IDE Hard Drive Docking Station delivers instant access to 2.5-inch & 3.5-inch IDE & SATA hard drives through two top loading drive slots
- one for Serial ATA drives & one for IDE drives
- instead of having to mount the drives into a computer or external enclosure/tray. The slot-loading design holds the SATA & IDE drive (s) upright inside the docks, neatly keeping them off the desk, for convenience & a clutter-free setup. For SATA drives, the HDD can be inserted & connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data & LP4 power connections, making it easy to connect to the dock using the included IDE data & power cables. Connected to the host computer through a single USB (Universal Serial Bus) 3.0 connection, both an IDE hard drive & a SATA hard drive (SATA, SATA II, SATA III) can be connected to the HDD dock simultaneously
- a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa, or simply harnessing fast & simple access to the contents on both hard drives. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computers storage/backup capabilities.


...

Clone any combination of 2.5in or 3.5in IDE or SATA hard drives. The UNIDUPDOCK Universal SATA/IDE Dual Hard Drive Duplicator functions as both a convenient solid state (SSD) or hard drive (HDD) copying/imaging solution or an external SATA/IDE SSD or HDD docking station for 2.5in or 3.5in drives (SATA, SATA II, SATA III). Providing quick, yet complete hard drive cloning functionality, this universal dock can operate as a standalone HDD duplicator with no connection to a host computer, delivering an exact 1 to 1 clone of the target hard drive including partition & boot sector information, the Host Protected Area (HPA) as well as user data at a copy rate of 72 MB/sec. A built in LCD screen then allows for tracking the duplication progress, as well as reporting errors on the drives. Supporting both IDE & SATA, this universal duplicator dock enables duplication from SATA to SATA, IDE to SATA or SATA to IDE, & IDE to IDE, as long as the source drive does not exceed the size of the destination drive. Or the docking station can even be used to quickly erase hard drives, for reuse in the future. Functioning as a universal IDE & SATA HDD docking station, the hard drive duplicator can be connected to a computer through USB (Universal Serial Bus) with support for simple plug-&-play installation, allowing users to access hard drive contents without having to mount in an external drive enclosure or open the computer case for conventional drive installation. Large capacity drives (tested with up to 4TB 3.5" & 1TB 2.5" drives per bay) can be used to greatly enhance your computers storage/backup capabilities. Contained in a small form factor design that makes it a suitable addition to desktop & laptop operating environments, this hard drive duplicator/external HDD docking station is a versatile storage & hard drive cloning utility that also features a host of other built in utilities that are accessible via a built in menu system. ...

Clone a SATA hard drive, sector-by-sector, to another SATA hard drive. The SATDOC2RU3GB USB (Universal Serial Bus) 3.0 to SATA Hard Drive Duplicator Dock can be used as a standalone SATA hard drive duplicator, or as a USB (Universal Serial Bus) 3.0 SATA hard drive docking station, enabling you to duplicate/clone an existing hard drive without the use of a host computer system or access docked hard drives as though they were installed within the computer system. In Duplicator Mode, it creates an exact 1-to-1 sector clone from one hard drive to another, including partition & boot sector information & all data, at a rate of ~72MB/second, ensuring data integrity & consistency for sensitive operations (data recovery, etc.). In Dock Mode, it can be connected to your host computer through USB (Universal Serial Bus) 3.0, supporting up to 5 Gbps of bandwidth from both hard drives to your computer system. The value of this hard drive docking station can be further extended through a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot. ...

Install a Slim optical drive & 3.5" hard drive into a single 5.25" bay. This Slim IDE Optical & 3.5in Hard Drive Mounting Bracket offers multi-purpose functionality, acting as either a Drive Bracket or cage to mount any slim IDE CD/DVD drive in a standard 5.25in bay of your computer, or to mount a slim IDE optical drive & regular floppy or hard drive in the same 5.25in bay. This kit also

Includes:: a slim IDE to 40-pin IDE adapter, for connecting a slim IDE optical drive to a desktop IDE motherboard or controller card.

...

Install a Slim optical drive & 3.5" hard drive into a single 5.25" bay. This Slim IDE Optical & 3.5in Hard Drive Mounting Bracket offers multi-purpose functionality, acting as either a Drive Bracket or cage to mount any slim IDE CD/DVD drive in a standard 5.25in bay of your computer, or to mount a slim IDE optical drive & regular floppy or hard drive in the same 5.25in bay. This kit also

Includes:: a slim IDE to 40-pin IDE adapter, for connecting a slim IDE optical drive to a desktop IDE motherboard or controller card.

...

Extend HDMI over CAT6 or CAT5 cabling, with RS232 serial & IR control. This HDBase T extender kit can transmit your 4K HDMI signal up to 115 ft. (35 m) over a single CAT5e or CAT6 cable. At lower resolutions up to 1080p, the extender kit can transmit your signal up to 230 ft. (70 m). The extender offers a complete end-to-end video & control solution, using HDBase T technology to extend not just HDMI, but also DC power, IR & serial control over a single CAT5 cable. By extending so much over just one CAT5 or CAT6 cable, HDBase T is the clear choice of every integrator & system designer. The added benefit of power over cable means that you'll only need one power source at one side of your extension
- great for extending video & control to areas where power outlets may be limited, such as industrial sites. Serial & IR extension optimizes operation by enabling you to control the video source or display from both the local & remote location. This HDBase T extender has been certified via the HDBase T Certification Program. This certification ensures the extender is compliant with HDBase T technical standards, & maximizes reliability with your HDMI display & video source, by ensuring compliance with their established HDMI ecosystem. With the A/V industry adopting 4K as the new high-resolution video standard, long-range video distribution can be a challenge over standard HDMI cables that become susceptible to signal degradation at 30 feet. This HDBase T extender can maintain your Ultra HD 4K picture quality
- four times the resolution of high-definition 1080p
- even at 330 feet away from your video source. Plus, because the extender supports high-definition 1080p & lower resolutions, you can comfortably use this extender to make any video source look great, while future-proofing your setup for 4K implementation. HDBase T technology offers a single-cable installation, so you can integrate this solution seamlessly using your existing CAT5e or CAT6


...

Extend HDMI video over CAT5 or CAT6 cabling up to 230 feet away, with a small USB (Universal Serial Bus)-powered transmitter for discreet installation. This compact extender kit uses HDBase T technology to extend your HDMI signal up to 230 feet (70 meters), over a single CAT5e or CAT6 cable. The extender supports Ultra HD & Full HD video resolutions (4K & 1080p), with support for the accompanying digital 7.1 audio. For a simple & tidy installation, the transmitter in this HDBase T extender kit features a small footprint & a built-in HDMI cable that connects directly to your video source, reducing clutter by eliminating the need for a local HDMI cable. You can power the transmitter using a USB (Universal Serial Bus) port on your source device, which makes it easier to install in areas where power outlets may be limited. Mounting hardware is also included for the receiver ensuring a discreet, professional installation. The simplicity & versatility of this compact transmitter make it a convenient solution for transmitting an HDBase T signal to a boardroom or classroom projector, enabling presenters in your office to quickly connect their laptop computer & share presentations or data sheets. The simplicity & versatility of this video extender make it the ideal solution for digital signage applications in large buildings such as shopping centers, stadiums, schools, & hospitals. The kit extends HDMI & 7.1 surround sound over a single cable, unlike some HDMI extenders that require two cables & only offer minimal audio support. Extending HDMI with one cable reduces potential failure points & also lowers your cabling costs. Plus, because the HDBase T extender kit uses standard CAT5e, CAT6 or CAT7 cables, it works with existing Ethernet infrastructure that's already built into large commercial buildings such shopping centers, stadiums, schools, & hospitals, making it the perfect solution for deploying digital signage. With high-quality HDMI cables beginning signal degradation at 30 feet ...

Extend HDMI to an HDBase T display or receiver over Cat 5e or CAT6 cabling. This compact transmitter uses HDBase T technology to extend your HDMI signal up to 230 feet (70 meters) over a single CAT5e or CAT6 cable, to an HDBase T display, projector or receiver (sold separately). The transmitter supports Ultra HD & Full HD video resolutions (4K & 1080p), with support for the accompanying digital 7.1 audio. For a simple & tidy installation, the HDBase T transmitter features a small footprint & a built-in HDMI cable that connects directly to your video source, reducing clutter by eliminating the need for an HDMI cable at your local source. The transmitter is powered using USB (Universal Serial Bus), which means you can use a USB (Universal Serial Bus) port on your source device to power the transmitter, which is perfect for extending from areas where power outlets may be limited. The compact transmitter works seamlessly with other HDBase T equipment, such as HDBase T displays, projectors, & receivers. The simplicity & versatility of this compact transmitter make it the ideal solution for transmitting an HDBase T signal to a boardroom or classroom projector, enabling presenters in your office to quickly connect their laptop computer & share presentations or data sheets. This transmitter extends HDMI & 7.1 surround sound over a single cable, unlike some HDMI extenders that require two cables & only offer minimal audio support. Extending HDMI with one cable reduces potential failure points while also lowering your cost in cabling. Plus, because the HDBase T transmitter uses standard network cables, it works with existing Ethernet infrastructures. This makes it the perfect solution for deploying digital signage in large buildings such as shopping centers, stadiums, schools or hospitals. With high-quality HDMI cables beginning signal degradation at 30 feet, it can be difficult to maintain the brilliance of 4K video even at shorter distances. But with HDBase T you'll be amazed at how your Ultra HD ...

Have you ever wanted to use more than one removable hard drive with your system, but dont want to waste space by installing an extra bay? A complement to the Star Tech.com DRW115ATABK, the DRW115CADBK is perfect for using multiple removable drives on the same system. With this removable caddy, you can swap operating systems, make high speed, high capacity backups or provide individual hard drives for multiple users. The caddy features the same protective shock absorption system as the DRW115ATABK & is constructed of durable aluminum for extra security & cooling. Two ball bearing fans provide a cooling airflow to keep your drives at their optimum temperatures & four LED indicators keep you updated on your drives status. This caddy is Plug & Play compatible with the DRW115ATABK, making it a snap to use multiple removable drives in the same system without wasting valuable bay space. Like the DRW115ATABK, this caddy features a unique locking mechanism that protects the drive from accidental removal during use. ...

Provides safe handling & anti-static protection for most 2.5in hard drives. The HDDCASE25BL 2.5-inch Anti-Static Hard Drive Protector Cases provide convenience & safety for almost any bare 2.5-inch SATA or IDE Hard Drives (HDD) or Solid State Drives (SSD). Constructed from a rugged anti-static rated plastic, these cases resist electrostatic build up & discharge, keeping sensitive equipment from harm
- ideal for preventing accidental electrostatic discharges (ESD) in any environment where bare hard drives are handled, & also for technicians & travelers who dont require a full enclosure. The protective cases feature a convenient access door for the drive connector, enabling you to access data contents without having to remove the HDD from the case.
...