Star Tech.com's DVIIDVIDFM DVI-I to DVI-D adapter features a male DVI-D (dual link) connector & a DVI-I female connector, essentially turning a female DVI-D (dual link) connector into a female DVI-I connector. The adapter allows DVI-I cables to be used in Digital only (DVI-D) connections between PC & monitor, eliminating the cost of having to buy a (DVI-D) cable to connect a DVI (digital) display. ...

Connect a DVI-I cable to a DVI-D port. Star Tech.com's DVIIDVIDFM DVI-I to DVI-D adapter features a male DVI-D (dual link) connector & a DVI-I female connector, essentially turning a female DVI-D (dual link) connector into a female DVI-I connector. The adapter allows DVI-I cables to be used in Digital only (DVI-D) connections between PC & monitor, eliminating the cost of having to buy a (DVI-D) cable to connect a DVI (digital) display. ...

Add a parallel port to your desktop computer through a PCI expansion slot. The PCI1P value priced EPP/ECP parallel card adds ...

Add copied or ghosted EDID (Extended Display Identification Data) to your HDMI signal to ensure compatibility with your display or projector. This EDID emulator resolves video communication problems that can occur between your HDMI video source & display. The emulator can copy or synthesize the Extended Display Identification Data (EDID) from your HDMI display & relay it to your video source, to fix problems that may result from using third-party equipment such as video extenders, video switches or KVMs in your video setup. EDID contains important information that your television or projector needs, to deliver its best picture quality. Because most video extenders or switches block EDID communication between your video source & display, EDID is often lost in transmission, limiting your video source's ability to output your display's native resolution. Using the EDID emulator, you can ensure your HDMI source & display are perfectly in sync, for crystal-clear picture quality. To ensure that any EDID communication issue can be solved, the EDID emulator supports both EDID copying & EDID ghosting. EDID copying saves the EDID settings from your display & communicates those exact settings to your source, which is perfect for EDID issues that are caused by a third-party disruption, such as a video switch or extender. EDID ghosting lets you emulate generic EDID settings, to deliver common data to your source or display. This is the perfect solution for EDID issues that often occur when you're working with devices that don't output EDID, such as older legacy equipment or some analog to digital video adapters. EDID communications contain a lot of important settings, such as maximum image size, color characteristics, factory preset timings, frequency range limits & more. With all of these specific details, it's easy to be confused or crossed up by the data. This emulator eliminates the hassle & confusion that comes with EDID, giving you a rotary d ...

Dock your 2.5in or 3.5in SATA 6 Gbps SSDs/HDDs over e SATA or USB (Universal Serial Bus) 3.0 with UASP. Theversatile SDOCKU33EBV UASP-enabled USB (Universal Serial Bus) 3.0 / e SATA docking station makes it easy for you to connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD), with the option to connect through either USB (Universal Serial Bus) or e SATA. For convenient compatibility & time-saving performance, the SDOCKU33EBV docking station can be connected through USB (Universal Serial Bus) 3.0, with support for full USB (Universal Serial Bus) 3.0 bandwidth (5 Gbps) as well as UASP, which delivers performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. For fast performance & efficient data transfers, the dock also supports the full SATA III bandwidth of 6 Gbps when connected through e SATA. With support for large capacity SATA I/II/III drives (tested up to 6TB), as well as 2.5in or 3.5in drives, this HDD/SSD docking station makes it easy to maximize the storage/backup capabilities of your computer using virtually any SATA drive. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. To ensure compatibility with your computer system, the SDOCKU33EBV supports all of the leading operating systems, including: Microsoft Windows (8/7/ Vista/XP/ Server 2008/ Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, & Google Chrome OS. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

The PEXESAT32 2 Port PCI Express e SATA 6 Gbps Controller Card offers simple connectivity between a host computer & e SATA 3.0 devices
-
...

Add 2 external SATA (e SATA) & 4 internal SATA ports to your desktop computer through a PCI Express expansion slot. This PCIe e SATA/SATA controller card adds two external Serial ATA (e SATA) ports & four internal SATA ports, allowing users to harness the speed & reliability of Serial ATA drive connections. The SATA controller card supports comm&-based switching as well as Native Command Queuing ensuring optimum performance from connected Serial ATA drives. The controller card also supports port multiplication, allowing you to connect multi-drive e SATA external storage using a single data connection to the controller card. Star Tech.coms PCI Express e SATA+SATA controller card is designed for reliable performance. ...

Add 2 external SATA (e SATA) & 4 internal SATA ports to your desktop computer through a PCI Express expansion slot. This PCIe e SATA/SATA controller card adds two external Serial ATA (e SATA) ports & four internal SATA ports, allowing users to harness the speed & reliability of Serial ATA drive connections. The SATA controller card supports comm&-based switching as well as Native Command Queuing ensuring optimum performance from connected Serial ATA drives. The controller card also supports port multiplication, allowing you to connect multi-drive e SATA external storage using a single data connection to the controller card. Star Tech.com's PCI Express e SATA+SATA controller card is designed for reliable performance. ...

Add up to 8TB of RAIDed, hot-swappable 3.5in SATA hard drive storage capacity to your computer through e SATA. The SAT3540ER2 external RAID multi bay hard drive enclosure/mobile rack delivers a high performance storage solution that lets you install up to 4 SATA hard drives (including SATA, SATA II & SATA III-6 Gbps) for connection to the host computer through e SATA. The 4-drive mobile rack supports JBOD as well as standard RAID modes (RAID 0, 1, 10 (1+0)), in addition to RAID 5, spanning/concatenation, & cloning (RAID 1 + Hot Spare). The cloning mode enables a drive to be removed for off-site storage, without interrupting the functionality of the enclosure or data accessibility. With support for up to 4 high-capacity SATA hard drives, the enclosure features individual removable drive trays that make hot swapping or interchanging failed or extra hard drives easy. A highly economical external storage solution, the enclosure supports any 3.5in SATA hard drive, allowing you to customize the storage appliance based on your preference of hard drive manufacturer. To ensure a safe & sturdy operating environment for hard drives installed within the multi-drive hard drive enclosure/mobile rack, the enclosure features a built-in 80mm ball bearing fan that enhances hard drive cooling, & offers a high quality aluminum body & attractive front panel design. An out-of-the box external RAID solution, the storage appliance

Includes:: the companion PCI Express SATA controller card (with port multiplier support), as well as an e SATA cable & the necessary power adapter.

...

Turn dual 2.5in SATA drives into an external storage solution for fast hard drive swapping. The S252U2ERR Dual Removable 2.5in SATA Hard Drive Enclosure provides a complete, hardware-based external storage solution for laptop or desktop computers. Accommodating two 2.5in SATA (SATA, SATA II, SATA III) hard drives or solid state drives (SSD), this compact HDD enclosure provides a broad range of RAID configurations including JBOD, Spanning (BIG/ Concatenated), RAID 0 (Fast), RAID 1 (Safe) & more
- providing the flexibility needed to create the storage solution that best fits your application. Large capacity drives (tested with up to 1TB per bay) can be used to greatly enhance your computers storage/backup capabilities. in addition this trayless enclosure features tool less removable hard drive bays, providing a quick & easy way to replace or upgrade the installed drives for more space or enhanced performance. This versatile dual hard drive enclosure can be connected to a host computer, using either USB (Universal Serial Bus) or e SATA with support for full hi-speed USB (Universal Serial Bus) 2.0 data transfer rates of up to 480 Mbps, & for e SATA transfer rates of up to 3 Gbps
- delivering the speed needed for your external storage to function seamlessly with your desktop or laptop computer.

...