Mount up to two 24" LCD or LED monitors to a desk, with extension, tilt, pan, swivel, pivot & height adjustments. The ARMDUAL Articulating Dual Monitor Arm lets you mount two displays to your desk or table, with extension, tilt, pan, swivel, pivot & height adjustments. The desk-mount monitor arm offers a wide range of motion on several axes, giving you the freedom to place your displays side-by-side, spread apart, back-to-back or anywhere in between. For viewing longer pages or blocks of code without scrolling, the dual arm also supports landscape to portrait display rotation for either monitor. Mounting your displays on a dual monitor arm above the desk surface enables you to adjust your display height, position & viewing angles easily for an ergonomic work environment, with the added benefit of reclaiming valuable workspace on your desk. Supporting 12
- 24" displays up to a maximum weight capacity of 30lbs (13.6kg), the dual arm monitor mount holds your displays with ease, & integrates a cable management channel to keep things neat. For added installation flexibility, the included mounting hardware can either clamp to the side of your desk / table or mount through a grommet hole, for a versatile dual-monitor mounting solution.
...

Mount your display on your desk surface or through a grommet, with spring-assisted height adjustment & cable management. This slim, articulating monitor arm lets you mount a flat-panel display on your desk or table, with dynamic adjustments that make it easy to position your monitor for the perfect viewing angle & highest comfort. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. The versatile monitor arm lets you extend, tilt, pan, swivel & pivot your display with a full range of motion across multiple axes, & features spring-assisted height adjustments for effortless positioning. For viewing longer pages or blocks of code without having to scroll down your screen, the LCD arm also supports simple landscape-to-portrait display rotation. With a stylish, slim design that looks great & takes up only a small amount of desk space, the monitor arm gives you the flexibility to locate your display as needed while reclaiming valuable workspace on your desk. Mounting your display above the desk surface enables you to adjust your display height, position & viewing angles easily, for an ergonomic work environment. Supporting 12
- 26" displays up to a maximum weight capacity of 15lbs (7kg), the monitor-mounting arm holds your display with ease, & integrates a cable management channel to keep things neat. For added installation flexibility, the included mounting hardware can either clamp to the side of your desk / table or mount through a grommet hole.
...

Mount up to a 24" LCD or LED monitor to a desk, with extension, tilt, pan, swivel, pivot & height adjustments. The ARMPIVOTE Articulating Monitor Arm lets you mount a display to your desk or table, with extension, tilt, pan, swivel, pivot & gas-spring height adjustments. The desk-mount monitor arm features a gas-spring cylinder to raise or lower your display with minimal effort, plus it offers a wide range of motion on several axes. For viewing longer pages or blocks of code without scrolling, the LCD arm also supports landscape to portrait display rotation. Mounting your displays on a monitor arm above the desk surface enables you to adjust your display height, position & viewing angles easily for an ergonomic work environment, with the added benefit of reclaiming valuable workspace on your desk. Supporting 12
- 24" displays up to a maximum weight capacity of 11lbs (5kg), the monitor mounting arm holds your display with ease, & integrates a cable management channel to keep things neat. For added installation flexibility, the included mounting hardware can either clamp to the side of your desk / table or mount through a grommet hole, for a versatile monitor mounting solution.
...

The Star Tech.com PCSCREWKIT is a handy assortment of common PC fasteners for building, repairing, & maintaining computer systems. The kit

Includes:: 12 different fasteners all in a plastic carrying case with divided compartments.

Includes:: 50 screws in each of 7 category types for a total of 350 screws as well as an assortment of standoffs. Screws included: SCREW6 32, SCREW6 32 3, SCREWM3, SCREW4 40, FANSCREW; Standoffs included (Star Tech part number): SCREWNUTM, SCREWNUT4 40, STANDOFF, STANDOFF2, STANDOFF3; Nuts included: NUT4 40 2, NUT4 40 6.



...

Add convenient A/V connectivity & network access to your boardroom, classroom or huddle space. This audio/video module makes it easy to connect HDMI, Display Port & VGA laptops to your room's HDMI display. Modern office environments need to support technology more than ever, to keep laptops, phones & tablets connected. During meetings, lectures & conferences, you may need to present content from your laptop to a display or projector. This A/V module simplifies connectivity & collaboration with automatic switching & conversion. It lets you connect your HDMI, DP or VGA laptop to a shared HDMI display or projector, without the hassle of menu & input selections. &, the module automatically switches to the most recently connected or powered-on laptop. Installing the module is easy, requiring just a single HDMI cable between the module & the display. Architectural connectivity is quickly becoming the trend when designing a boardroom or huddle space. Star Tech.com A/V modules let you: Customize A/V connectivity according to the specific needs of your space ; Install in easy to access locations. You can install this A/V module as a standalone solution using the supplied table-mounting bracket. Or, you can install it as an accessory in a Star Tech.com single-module (BEZ4MOD) or dual-module (BOX4MODULE) conference room table connectivity box (each sold separately). ...

The Star Tech.com 8cm x 8cm x 2.5cm (3 1/8" x 3 1/8" x 1") PC case fan is an add-in cooling fan designed to fit most computers. It can be used to circulate cool air into the case or exhaust warm air out, preventing problems due to overheating components. A quiet running brushless ball bearing DC motor coupled with a high efficiency blade design is capable of moving 32 CFM (cubic feet per minute) of air. Power is supplied to the fan using a 3-lead TX3 connector that plugs into the motherboard & allows the system to monitor fan speed & operating status. ...

The PATA2SATA3 is a bi-directional SATA IDE adapter/converter that lets you connect a Serial ATA drive to a legacy IDE port, or an IDE drive to a SATA motherboard port. A cost-effective solution for upgrading existing IDE systems to support SATA hard drives or optical drives, the SATA/IDE adapter eliminates the expense of having to purchase a controller card while saving the expansion slot that would be required for card installation. In addition to SATA hard drive installation, the adapter can be reversed in order to connect older IDE drives to a newer SATA-enabled motherboard, making it easy to retrieve old files from a previous system. Star Tech Advantage
- A single, versatile adapter can be used to connect an IDE device to a SATA motherboard or vice-versa without any drivers or software installation
- Supports not only hard drives, but CD/DVD optical drives as well
- Backed by a Star Tech.com 1 year warranty & free lifetime technical support


...

The PATA2SATA3 is a bi-directional SATA IDE adapter/converter that lets you connect a Serial ATA drive to a legacy IDE port, or an IDE drive to a SATA motherboard port. A cost-effective solution for upgrading existing IDE systems to support SATA hard drives or optical drives, the SATA/IDE adapter eliminates the expense of having to purchase a controller card while saving the expansion slot that would be required for card installation. In addition to SATA hard drive installation, the adapter can be reversed in order to connect older IDE drives to a newer SATA-enabled motherboard, making it easy to retrieve old files from a previous system. Star Tech Advantage
- A single, versatile adapter can be used to connect an IDE device to a SATA motherboard or vice-versa without any drivers or software installation
- Supports not only hard drives, but CD/DVD optical drives as well
- Backed by a Star Tech.com 1 year warranty & free lifetime technical support


...

Add four external USB (Universal Serial Bus) 3.0 ports to your notebook or Ultrabook with a slim, portable hub. The ST4300MINU3B Portable 4 Port Super Speed Mini USB (Universal Serial Bus) 3.0 Hub (Black) lets you expand your USB (Universal Serial Bus) connectivity by turning a single USB (Universal Serial Bus) 3.0 port into four external USB (Universal Serial Bus) 3.0 ports. The integrated cable design makes this mini USB (Universal Serial Bus) hub the perfect accessory for your Mac / PC notebook or Ultrabook computer. The 4 Port USB (Universal Serial Bus) 3.0 hub supports USB (Universal Serial Bus) 3.0 data bandwidth (5 Gbps
- up to 10x more than USB (Universal Serial Bus) 2.0) & is backward compatible with USB (Universal Serial Bus) 2.0 & 1.1 devices, ensuring flawless performance from all of your USB (Universal Serial Bus) peripherals/devices, regardless of their age. Ideal for home & business users who require portability, the external USB (Universal Serial Bus) 3.0 hub is USB (Universal Serial Bus)-powered & features a rugged, compact design with a built-in cable so no additional cables are needed to connect the hub to your system.
...

Add safe & reliable swappable storage from a single 5.25in front bay. This high quality Removable SATA Hard Drive Drawer/ Mobile Rack delivers a convenient SATA hot-swap solution, allowing you to quickly swap Serial ATA hard drives in & out of a computer without having to open the computer case. Simply install the (included) drive bay into a 5.25in drive bay on the host computer, then mount a 3.5in SATA HDD in the (removable) caddy. Connecting the SATA hard drive to the computer is as easy as inserting the caddy into the drive bay, which can be locked to prevent unauthorized removal of the installed SATA drive. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. A suitable solution for large volume drives, the HDD drawer supports SATA, SATA II, & SATA III-6 Gbps hard drives allowing you to swap in large amounts of data in a matter of seconds. The mobile rack/backplane is fully compatible with RAID installations to ensure maximum performance & versatility for enhanced storage applications. The drive caddy features a rear panel ball bearing fan that helps keep the enclosed drive cool, in turn helping to optimize operation while preserving drive lifespan. To prevent damage to the hard drive (s) while being transferred in & out of the computer, the drive caddy features shock absorbers & rubber cushioning that help limit vibration/shock to the drive. This mobile rack is also compatible with DRW113-series SATA hard drive caddies. A dependable, long-lasting storage solution, the drive drawer features highly durable construction, with a 3K insertion rating. ...